IKEA PS 2014 003.114.98 Lighting instructions manual

The IKEA PS 2014 003.114.98 is a modern lighting fixture designed for versatile home use. This manual provides essential information for safe installation, operation, and maintenance of your new light. It includes sections on safety warnings, product features, assembly instructions, bulb specifications, operation, cleaning, and troubleshooting.

Features at a Glance

Key components: Adjustable lamp head, metal shade, flexible arm, wall mounting bracket, integrated switch, and dimmer compatibility.

Safety Information

Read all instructions before installation and use.

1. Electrical Safety: Ensure power is turned OFF at the circuit breaker before installation or any maintenance.
2. Bulb Specification: Use only the recommended bulb type and maximum wattage. Exceeding wattage can cause fire.
3. Mounting Surface: Mount only on a wall that can support the fixture's weight. Use appropriate wall anchors for drywall.
4. Cord Management: Do not pinch or damage the power cord. Keep away from heat sources and sharp edges.

WARNING! Risk of electric shock. Installation should be performed by a qualified electrician if you are unsure. Do not use if any part is damaged.

Package Contents

Unpack carefully and verify all parts are present.

• 1 x Lamp Head with Shade
• 1 x Flexible Arm
• 1 x Wall Mounting Bracket
• 1 x Set of Mounting Screws & Wall Plugs
• 1 x Power Cord with Integrated Switch
• 1 x Instruction Manual (this document)

Note: Light bulb is not included. Please purchase separately.

Assembly Instructions

Assemble on a soft, clean surface to avoid scratches.

1. Attach Arm to Bracket: Insert the end of the flexible arm into the socket on the wall bracket. Tighten the provided locking screw securely.
2. Attach Lamp Head to Arm: Connect the lamp head to the free end of the flexible arm. Ensure the connection is firm and allows for adjustment.
3. Route the Cord: Feed the power cord through the flexible arm and out from the wall bracket, leaving enough slack for final positioning.
4. Check Movements: Gently swivel the lamp head and bend the arm to ensure all joints move smoothly.

CAUTION! Do not over-tighten screws, as this may damage the threads or finish.

Specifications

• Model: IKEA PS 2014 003.114.98
• Type: Wall-mounted adjustable task light
• Max Bulb Wattage: 60W (or equivalent LED, check local regulations)
• Bulb Base: E26/E27 (Standard Screw)
• Dimmable: Yes, with compatible dimmer switch and dimmable bulbs
• Cord Length: Approximately 1.8 meters (6 feet)
• Finish: Powder-coated metal
• Input Voltage: 120V AC, 60Hz (or local standard, e.g., 230V, 50Hz)

Installation & Mounting

Mount the bracket to a wall stud or use suitable wall anchors.

1. Turn OFF power at the circuit breaker.
2. Hold the wall bracket against the wall at the desired height. Use a level to ensure it is straight.
3. Mark the screw holes on the wall. Drill pilot holes and insert wall plugs if not mounting into a stud.
4. Secure the bracket to the wall using the provided screws.
5. Hang the assembled lamp (arm and head) onto the mounted bracket.
6. Plug the power cord into a wall outlet. Restore power at the circuit breaker.

Tip: For optimal task lighting, position the bracket so the lamp can easily reach the desired work area.

Operation & Dimming

Use the integrated switch on the cord to turn the light ON and OFF.

1. Positioning: Gently bend the flexible arm and adjust the lamp head to direct light where needed.
2. Dimmer Use: If connected to a wall dimmer switch, adjust the light level to your preference. Ensure you are using dimmable bulbs (LED/CFL/Incandescent).
3. Swivel Function: The lamp head rotates horizontally and tilts vertically for precise beam control.

Note: Some LED bulbs may flicker or not dim smoothly with certain dimmers. Consult the bulb manufacturer's compatibility guide.

Bulb Replacement

Always allow the bulb to cool before touching.

1. Turn OFF the light and unplug the fixture from the wall outlet.
2. Allow the existing bulb to cool completely if it was recently on.
3. Grip the bulb firmly and turn it counterclockwise to remove it from the socket.
3. Insert the new bulb of the correct type and wattage (max 60W or equivalent). Screw in clockwise until snug. Do not overtighten.
4. Plug in the fixture and turn it ON to test the new bulb.

WARNING! Never exceed the maximum recommended wattage. Using a higher wattage bulb can overheat the fixture and create a fire hazard.

Care & Cleaning

Unplug the fixture before cleaning.

1. Use a soft, dry or slightly damp cloth to wipe the metal shade and arm.
2. For tougher marks, use a mild soap solution. Do not use abrasive cleaners or solvents.
3. Ensure the fixture is completely dry before plugging it back in.

CAUTION! Never immerse the fixture, cord, or plug in water or other liquids. Do not spray cleaners directly onto the fixture.

Regulatory & Warranty

This product complies with applicable electrical safety standards. The IKEA warranty is valid only with proof of purchase (receipt) from an IKEA store. For warranty service or support, contact your local IKEA customer service or visit www.ikea.com.

Disposal: Dispose of this product and any used bulbs according to local environmental regulations for electronic waste.

Troubleshooting

For Support: IKEA Customer Service: 1-800-434-IKEA (4532) or www.ikea.com.