IKEA PRÄSTHOLM 704.181.70 Bench instructions manual

The IKEA PRÄSTHOLM 704.181.70 is a sturdy wooden bench designed for indoor use, featuring a classic design with solid wood construction, pre-drilled holes for easy assembly, and a protective finish. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.

1. Parts & Tools Checklist 2. Safety Instructions 3. Step-by-Step Assembly 4. Product Specifications 5. Care & Maintenance 6. Warranty Information 7. Troubleshooting

Parts & Tools Checklist

Before assembly, verify all parts are included. Key components: Bench seat, Bench legs (4 pieces), Support braces (2 pieces), Hardware pack.

Part Number	Description	Quantity
101	Bench seat panel	1
102	Bench leg	4
103	Support brace	2
201	Wood screw 4x40mm	12
202	Wood screw 5x50mm	8
203	Allen key 4mm	1
204	Wooden dowel	8

Tools needed: Phillips screwdriver, hammer (optional for dowels).

Safety Instructions

Read all instructions before assembly. Keep children and pets away during assembly.

Assemble on a soft, clean surface to avoid scratches.
Ensure all screws are tightened securely but do not overtighten.
Check stability after assembly; bench should not wobble.
Use only for intended purpose (indoor seating, max load 200kg/440lbs).

WARNING! Bench is heavy; lift with care using two people. Do not stand on the bench.

Step-by-Step Assembly

Follow steps in order. Estimated assembly time: 30-45 minutes.

Attach legs to braces: Align leg (102) with support brace (103). Insert two wood screws (202) per connection. Repeat for all four legs.
Connect leg assemblies to seat: Turn bench seat (101) upside down. Position leg assemblies at marked locations. Secure with wood screws (201) through pre-drilled holes.
Reinforce with dowels: Insert wooden dowels (204) into remaining holes; tap gently with hammer if needed.
Final check: Turn bench upright. Tighten all screws. Ensure bench sits level on floor.

Tip: If parts don't align, check orientation; do not force connections.

Product Specifications

Dimensions: Length 120cm, Width 40cm, Height 45cm.
Material: Solid pine wood with clear lacquer finish.
Weight capacity: Max 200kg (440lbs) distributed evenly.
Color: Natural wood tone.
Usage: Indoor use only.
Warranty: 10-year limited warranty against manufacturing defects.

Care & Maintenance

To maintain appearance and longevity:

Wipe with a dry or slightly damp cloth; avoid abrasive cleaners.
Protect from direct sunlight and excessive humidity.
Tighten screws periodically if bench becomes loose.
For scratches, use matching wood touch-up pen (sold separately).

CAUTION! Do not use harsh chemicals; do not soak with water.

Warranty Information

IKEA provides a 10-year limited warranty covering defects in materials and workmanship under normal household use. Warranty does not cover damage from misuse, accidents, or improper assembly. Keep receipt as proof of purchase. For claims, contact IKEA customer service with product number (704.181.70) and purchase details.

Troubleshooting

Issue	Possible Cause	Solution
Bench wobbles	Uneven floor or loose screws	Tighten all screws; place on level surface; adjust leg caps if included.
Screw won't tighten	Stripped thread or misalignment	Check hole alignment; do not overtighten; contact IKEA for replacement part.
Part missing	Packaging error	Refer to parts list; contact IKEA store or customer service with product number.
Wood crack	Over-tightening or impact	Stop assembly; contact IKEA for guidance; may be covered under warranty.
Finish discoloration	Sun exposure or liquid spill	Clean immediately; avoid direct sunlight; use coasters for drinks.

Support: For missing parts or assembly help, visit www.ikea.com or call IKEA customer service.