IKEA POÄNG 094.175.89 Armchair instructions manual

The IKEA POÄNG 094.175.89 is a classic bentwood armchair with a timeless design, featuring a curved birch frame, removable cushion, and a weight capacity of up to 150kg. This manual provides essential information for safe assembly, use, care, and maintenance of your armchair. Below are key sections covering safety, parts identification, step-by-step assembly, usage guidelines, and care instructions.

Parts & Components

Key components included in the package: Bentwood frame, Armrests, Seat cushion, Back cushion, Allen key, Screws and dowels.

Tools Required

Only the provided Allen key is needed. No additional tools required.

1. Allen key (included).
2. Clean, flat surface for assembly.
3. Soft cloth to protect frame during assembly.

WARNING! Do not use power tools for assembly as they may damage the wood or overtighten screws.

Assembly Instructions

Follow these steps carefully. Assembly requires two people.

1. Unpack all parts and lay them on a clean, soft surface.
2. Identify left and right armrests (marked L and R).
3. Align armrests with the pre-drilled holes in the main frame.
4. Insert the provided dowels into the corresponding holes.
5. Secure each armrest using the included screws and Allen key.
6. Hand-tighten screws firmly but do not overtighten.
7. Attach protective pads to the bottom of the frame legs.
8. Place seat and back cushions onto the frame.

CAUTION! The frame is heavy; lift with care using two people to avoid injury.

Specifications

• Model: POÄNG 094.175.89
• Frame Material: Birch veneer, bentwood
• Cushion Fill: Polyurethane foam
• Cover Material: Removable fabric (machine washable)
• Dimensions (WxDxH): 68cm x 78cm x 101cm
• Seat Height: 40cm
• Weight Capacity: 150kg
• Weight of Product: 12.5kg
• Designer: Noboru Nakamura

Usage & Safety

Use the armchair on a flat, stable surface. Do not stand or kneel on it.

Safety Guidelines:

1. Maximum load: 150kg.
2. Do not use outdoors or in damp areas.
3. Keep away from direct heat sources (radiators, fireplaces).
4. Ensure all screws are tight before first use and periodically thereafter.
5. Do not drag the chair across the floor; lift it to move.
6. This is not a step ladder or climbing frame.

Cushion Care

Cushion covers are removable and machine washable.

1. Remove cushion cover by unzipping.
2. Machine wash at 40°C on gentle cycle.
3. Do not bleach. Do not tumble dry.
4. Iron on low heat if needed.
5. Foam cushions can be spot cleaned with mild detergent.
6. Allow cushions to air dry completely before reassembly.

Tip: Fluff cushions regularly to maintain shape.

Frame Maintenance

Clean frame with a dry or slightly damp cloth. Do not use abrasive cleaners.

1. Dust regularly with a soft, dry cloth.
2. For stains, use a cloth dampened with mild soapy water.
3. Wipe dry immediately with a clean cloth.
4. Check screw tightness every 3-6 months.
5. Apply furniture wax occasionally to maintain wood finish.

WARNING! Do not soak the wood or use harsh chemicals.

Warranty Information

IKEA limited warranty applies. Refer to the IKEA warranty card included with purchase or visit www.ikea.com.

Coverage: 10-year limited warranty on frame. 1-year warranty on cushions under normal domestic use.

Safety Symbols

Environmental Information

Frame made from renewable birch wood. Cushion foam free from CFCs. Packaging is recyclable. At end of life, disassemble and recycle materials appropriately. For recycling information, contact local authorities or visit www.ikea.com.

Troubleshooting

Customer Service: Contact IKEA customer support at 1-888-888-4532 or visit www.ikea.com.