IKEA PINNIG 803.297.91 Bench instructions manual

The IKEA PINNIG 803.297.91 is a versatile bench designed for indoor use, featuring a sturdy wooden frame and a comfortable padded seat. It is easy to assemble with included tools and hardware, and is suitable for various rooms such as entryways, bedrooms, or living areas. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.

1. Parts & Hardware Included 2. Safety Instructions 3. Assembly Steps 4. Specifications 5. Care & Maintenance 6. Usage Tips 7. Troubleshooting 8. Warranty & Support

Parts & Hardware Included

Before assembly, check that all parts are present and undamaged.

Part Number	Description	Quantity
A	Bench seat panel	1
B	Side frame (left)	1
C	Side frame (right)	1
D	Front/Back stretcher bars	2
E	Wooden dowels	8
F	Allen key (included tool)	1
G	Cam lock screws	4
H	Wood screws	12
I	Felt pads	4

Safety Instructions

Read all instructions before assembly. Keep children and pets away during assembly.

Assemble on a soft, clean surface to avoid scratches.
Use only the provided tools and hardware.
Ensure all connections are tight and secure before use.
Do not stand or jump on the bench.

WARNING! Bench is heavy; lift with care to avoid injury. Do not exceed the maximum weight limit of 220 lbs (100 kg).

Assembly Steps

Follow these steps in order. Estimated assembly time: 30-45 minutes.

Step 1: Attach side frames (B & C) to front stretcher bar (D) using wooden dowels (E) and cam locks (G). Tighten with Allen key.
Step 2: Connect the back stretcher bar (D) to the side frames in the same manner.
Step 3: Place the bench seat panel (A) on top of the assembled frame.
Step 4: Secure the seat to the frame from underneath using wood screws (H).
Step 5: Attach felt pads (I) to the bottom of each leg to protect floors.
Step 6: Check all screws and connections are tight. Wipe clean with a dry cloth.

Tip: Do not overtighten screws, as this may strip the wood.

Specifications

Dimensions: 47.25" L x 15.75" W x 17.75" H (120 cm x 40 cm x 45 cm).
Weight Capacity: 220 lbs (100 kg).
Material: Solid pine frame, particleboard seat with foil finish, polyurethane foam padding.
Color: White stain.
Assembly Required: Yes, tools included.
Intended Use: Indoor residential use only.
Warranty: Limited 10-year warranty against manufacturing defects.

Care & Maintenance

To maintain appearance and longevity:

Wipe with a dry or slightly damp cloth. Do not use abrasive cleaners.
Avoid direct sunlight and heat sources to prevent fading or warping.
Do not place near humid areas (e.g., bathrooms) to avoid moisture damage.
Periodically check and tighten screws if needed.

CAUTION! Do not use wax, polish, or chemical cleaners on the surface.

Usage Tips

Maximize functionality and safety:

Place in entryway for putting on shoes, or at the foot of a bed for seating.
Ensure bench is on a level surface to prevent wobbling.
Use a cushion for added comfort if desired (not included).
Do not drag the bench across floors; lift to move.

Troubleshooting

Issue	Possible Cause	Solution
Bench wobbles	Uneven floor or loose screws	Check floor level; tighten all screws and cam locks.
Parts don't fit	Incorrect alignment	Disassemble and re-check diagram; ensure dowels are fully inserted.
Scratches on surface	Assembly on hard surface	Assemble on carpet or blanket; use touch-up paint (not included) for minor scratches.
Screws won't tighten	Stripped holes	Do not overtighten; if stripped, contact IKEA support for replacement parts.
Missing parts	Packaging error	Contact IKEA customer service with product number and receipt.

Warranty & Support

IKEA offers a limited 10-year warranty covering manufacturing defects under normal household use. Warranty does not cover damage from misuse, accidents, or improper assembly.

For support: Visit www.ikea.com or contact your local IKEA store. Have product number (803.297.91) and receipt ready.

Recycling: Dispose of packaging responsibly. Bench is recyclable where facilities exist.