IKEA PILSKOTT 604.781.07 Lighting instructions manual

The IKEA PILSKOTT 604.781.07 is a modern LED lighting solution designed for ambient illumination. This manual provides essential information for the safe installation, operation, and maintenance of your PILSKOTT light. Key sections include safety warnings, product features, assembly instructions, operation guidelines, care tips, and troubleshooting.

1. Safety Information 2. Product Overview & Features 3. Package Contents 4. Technical Specifications 5. Assembly & Installation 6. Operation & Controls 7. Mounting Options 8. Care & Maintenance 9. Troubleshooting 10. Warranty & Support

Safety Information

Read all instructions before installation and use. Failure to follow warnings can result in electric shock, fire, or injury.

Warning	Description
Electrical Safety	Ensure power is switched OFF at the mains before installation or handling. Connect only to a properly installed and grounded outlet.
Heat & Ventilation	Do not cover the light or place near heat sources. Allow adequate ventilation.
Water & Moisture	This is not a bathroom or outdoor light. Keep away from water and damp areas.
Children & Safety	Keep out of reach of young children during assembly. Small parts may be a choking hazard.
Lamp Replacement	Use only LED bulbs with specifications matching those listed in this manual. Do not exceed maximum wattage.

Product Overview & Features

Key components: LED light source, diffuser, mounting bracket, power cord, and wall plug.

Modern Design: Sleek, minimalist appearance suitable for various room styles.
Energy Efficient LED: Long-lasting, low energy consumption illumination.
Integrated Dimmer (if applicable): Check product label for dimming capability.
Soft Light Diffusion: Provides even, comfortable ambient light without glare.
Plug & Play: Simple installation with standard wall plug (for non-hardwired models).

NOTE: Design may vary slightly. Refer to the product label for specific model details.

Package Contents

Unpack carefully and verify all parts are present before starting assembly.

PILSKOTT light fixture (1)
Mounting bracket & hardware (screws, wall plugs)
Power adapter/transformer (if applicable)
User manual (this document)

WARNING! Do not discard packaging until assembly is complete. Inspect for damage and contact IKEA if any parts are missing.

Technical Specifications

Article Number: 604.781.07
Light Source: Integrated or replaceable LED.
Power Consumption: [e.g., 15W] (Check product label).
Luminous Flux: [e.g., 1400 lumens] (Check product label).
Color Temperature: [e.g., 2700K Warm White] (Check product label).
Input Voltage: 100-240V AC, 50/60Hz.
Dimmable: Yes / No (Check product label).
Cable Length: Approximately 1.8 meters.
Dimensions: Refer to product packaging for exact measurements.

Assembly & Installation

Follow these steps for safe and correct assembly. Recommended tools: Phillips screwdriver, pencil, spirit level, drill.

Plan Mounting Location: Choose a solid wall or ceiling away from curtains and heat sources. Ensure proximity to a power outlet.
Mount Bracket: Hold bracket against wall, mark screw holes. Drill holes, insert wall plugs, and secure bracket with screws.
Connect Light (if required): For hardwired models, connect wires (Live, Neutral, Earth) to household wiring following local electrical codes. For plug-in models, proceed to step 4.
Attach Light Fixture: Align the fixture with the bracket and secure it as per instructions (e.g., twist-lock or screw fastening).
Final Check: Ensure all connections are secure and the fixture is stable.

CAUTION! If unsure about electrical work, consult a qualified electrician.

Operation & Controls

Operation is simple via the main power switch or an in-line switch on the cord.

To Turn On: Plug into wall outlet and press the power switch to the ON (I) position.

To Turn Off: Press the power switch to the OFF (O) position.

Dimming (if applicable): Use with a compatible trailing-edge dimmer switch. Do not use with standard leading-edge dimmers as this may cause flickering or damage.

NOTE: Allow a few seconds for the LED to reach full brightness after switching on.

Mounting Options

The PILSKOTT is designed primarily for wall mounting.

Wall Mounting (Standard): Use the provided bracket. Ensure wall material can support the fixture's weight.
Surface: Mount on a flat, vertical surface. Do not mount on sloped or uneven surfaces without proper adaptation.

Tip: Use a spirit level to ensure the fixture is straight before final tightening.

Care & Maintenance

Unplug the light from the power outlet before any cleaning.

Cleaning: Use a soft, dry or slightly damp cloth to wipe the diffuser and body. Do not use abrasive cleaners, solvents, or sprays.
LED Replacement: Most models have non-replaceable integrated LEDs. If replaceable, ensure the replacement LED matches the specifications (socket type, wattage, voltage).
Inspection: Periodically check the power cord, plug, and mounting for any signs of damage.

WARNING! Never immerse the light fixture in water or other liquids.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Light does not turn on	No power / Faulty connection	Check if wall outlet is working. Ensure plug is fully inserted. Check the power switch is ON.
Light flickers	Incompatible dimmer / Loose connection	If dimmable, ensure a compatible dimmer is used. Check all wire connections are tight.
Dim light or reduced output	End of LED life / Power issue	Integrated LEDs may be near end of lifespan. Check input voltage is correct.
Buzzing sound	Transformer / Driver / Dimmer	May be normal for some drivers. Ensure using a compatible dimmer if applicable.
Fixture feels hot	Normal operation / Ventilation blocked	LEDs generate some heat. Ensure fixture is not covered and has adequate airflow.

Reset: Unplug from power for 30 seconds, then plug back in.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty document included with your purchase or available at IKEA stores for full terms and conditions.

Recycling: Do not dispose of with household waste. Recycle according to local regulations for electrical and electronic equipment.

For Support: Visit the IKEA website (www.ikea.com) for your country or contact your local IKEA store.