IKEA PILBLIXT 804.999.48 Lighting instructions manual

The IKEA PILBLIXT 804.999.48 is a modern LED lighting solution designed for indoor use, featuring energy-efficient LED technology, adjustable brightness levels, multiple color temperature settings, and a user-friendly control interface. It includes a remote control, wall mount bracket, and necessary installation hardware. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Using the Remote Control 8. Smart Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: LED light panel, Remote Control, Wall mount bracket, Power adapter, Installation screws.

Feature	Description
LED Panel	Energy-efficient LED lighting with long lifespan
Remote Control	Wireless control for brightness and color temperature
Wall Mount Bracket	For secure mounting on walls
Power Adapter	Converts AC power to DC for safe operation
Brightness Control	Adjustable from 10% to 100% intensity
Color Temperature	Switch between warm white, cool white, and daylight
Timer Function	Auto-off timer from 15 minutes to 4 hours
Memory Function	Remembers last used settings
Low Heat Emission	Safe to touch during operation
Dimmable	Smooth dimming without flickering

Installation

Unpack and inspect all contents. Choose suitable location for mounting.

Mount bracket: Use included screws to secure wall bracket to desired location.
Attach light panel: Align panel with bracket and secure with locking mechanism.
Connect power: Plug power adapter into wall outlet, then connect to light panel.
Test operation: Press power button to ensure light turns on.

WARNING! Ensure power is disconnected during installation. Mount on stable surface only.

First-Time Setup

After installation, configure initial settings for optimal use.

Power on: Press power button on remote or light panel.
Pair remote: Point remote at light and press PAIR button for 3 seconds until LED blinks.
Set default brightness: Use +/- buttons to adjust to preferred level.
Select color temperature: Cycle through options using COLOR button.
Set timer: Press TIMER button and select duration if needed.

CAUTION! Do not look directly at LED light at close range for extended periods.

Specifications

Model: PILBLIXT 804.999.48
Power Consumption: 15W maximum
Lumen Output: 1200 lumens
Color Temperature: 2700K-6500K adjustable
CRI: >80
Input Voltage: 100-240V AC, 50/60Hz
DC Output: 24V, 0.625A
Dimensions: 400mm x 300mm x 15mm
Weight: 1.2 kg
Lifespan: 25,000 hours
Operating Temperature: 0°C to 40°C

Controls and Settings

Control via physical buttons on panel or remote control.

Panel Controls: Power button, Brightness up/down, Color cycle button.

Remote Controls: POWER, Brightness +/-, COLOR, TIMER, MEMORY, PAIR.

Brightness: Adjust from 10% to 100% in 10% increments. Color Temperature: Three presets - Warm White (2700K), Cool White (4000K), Daylight (6500K). Timer: 15min, 30min, 1hr, 2hr, 4hr options. Memory: Saves last brightness and color settings.

Connecting to Power

Use only included power adapter for safe operation.

Ensure light is turned off before connecting power.
Connect DC plug to light panel input port.
Plug AC adapter into wall outlet.
Turn on using power button.

Tip: Use surge protector for added safety in areas with unstable power.

Using the Remote Control

Remote operates up to 8 meters distance with clear line of sight.

Insert batteries: Open battery compartment and insert 2 AAA batteries.
Pairing: Press and hold PAIR button until light blinks confirmation.
Basic controls: Use POWER, Brightness +/-, COLOR buttons.
Timer setting: Press TIMER, then select duration with number buttons.
Memory recall: Press MEMORY to restore saved settings.

WARNING! Keep remote away from moisture and extreme temperatures.

Smart Features

Memory Function: Automatically saves last used settings. Timer: Automatic shut-off for energy saving. Color Adjustment: Adapt lighting to different activities (reading, relaxing, working).

Care & Cleaning

Disconnect power before cleaning. Use soft, dry cloth only. Do not use liquid cleaners.

CAUTION! Never spray liquids directly on light panel. Avoid abrasive materials.

Regulatory Information

CE certified for European market. RoHS compliant (no hazardous substances). Energy Class A+. For indoor use only. Copyright © IKEA of Sweden AB. For support, visit www.ikea.com or contact local IKEA customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Light won't turn on	Power connection	Check power adapter connection; ensure outlet has power.
Remote not working	Batteries/distance	Replace batteries; ensure within 8m range; point at light.
Flickering light	Loose connection	Check all power connections; try different outlet.
Color not changing	Remote pairing	Re-pair remote with light panel.
Dim light	Brightness setting	Adjust brightness using + button.
Timer not working	Setting error	Reset timer settings; ensure proper sequence.

Reset: Hold power button for 10 seconds to factory reset.

Service: Contact IKEA customer service or visit www.ikea.com for support.