IKEA PILBLIXT 504.999.35 Table Lamp instructions manual

The IKEA PILBLIXT 504.999.35 is a modern table lamp featuring a minimalist design, energy-efficient LED light source, adjustable brightness, touch-sensitive controls, and a stable base. It is designed for indoor use on flat, stable surfaces. Below are key sections for safety, assembly, features, operation, care, and troubleshooting.

1. Features at a Glance 2. Assembly Instructions 3. First-Time Setup 4. Specifications 5. Controls and Operation 6. Light Settings 7. Replacing the Light Source 8. Safety Information 9. Care & Cleaning 10. Warranty Information 11. Troubleshooting

Features at a Glance

Key components: LED light module, touch-sensitive control area, weighted base, power cord with plug.

Feature	Description
Light Source	Integrated, non-replaceable LED (energy class A++)
Control	Touch-sensitive base for on/off and dimming
Brightness Levels	Adjustable in three steps (Low, Medium, High)
Power Supply	100-240V AC, 50/60Hz
Base	Weighted for stability
Cord Length	1.5 meters (approx. 5 feet)
Material	Plastic shade, metal base
Color Temperature	2700K (Warm White)
Dimensions	Height: 30 cm, Base Diameter: 15 cm
Intended Use	Indoor table lamp for general lighting

Assembly Instructions

Unpack all parts and check contents. Ensure you have a clean, flat surface for assembly.

Prepare the base: Place the weighted base on a stable surface.
Attach the stem: Align the stem with the socket on the base and press down firmly until it clicks into place.
Attach the shade: Place the shade over the LED module at the top of the stem. Gently twist clockwise until secure.
Position the cord: Route the power cord from the base to your power outlet, ensuring it does not create a tripping hazard.

WARNING! Do not force parts during assembly. Ensure all connections are secure before plugging in.

First-Time Setup

After assembly, plug the lamp into a standard wall outlet.

Power on: Touch the control area on the base briefly to turn the lamp on. The default brightness is Medium.
Test dimming: Touch and hold the control area to cycle through brightness levels (Low -> Medium -> High).
Positioning: Place the lamp on a stable, level surface away from edges.
Ambient check: Ensure the light is suitable for your intended area.

CAUTION! Use only with the provided power supply. Do not use with dimmer switches.

Specifications

Model: PILBLIXT 504.999.35
Light Output: 400 lumens
Power Consumption: 5W (max)
Energy Class: A++
Voltage: 100-240V AC, 50/60Hz
Color Rendering Index (CRI): >80
Lifetime: Approx. 25,000 hours
Operating Temperature: 0°C to 40°C (32°F to 104°F)
Weight: 0.8 kg (1.76 lbs)
Certifications: CE, RoHS compliant

Controls and Operation

The lamp is controlled via a touch-sensitive area on the base.

Basic Operation:

Turn On/Off: Briefly touch the control area.
Adjust Brightness: Touch and hold to cycle: Low -> Medium -> High -> Low.
Memory Function: The lamp remembers the last brightness setting when turned off and on again.

Note: The control area may be marked with a small symbol. Ensure your finger is dry for reliable operation.

Light Settings

The lamp offers three fixed brightness levels:

Low: Suitable for ambient or night light (approx. 150 lumens).
Medium: Ideal for general tasks like reading (approx. 300 lumens).
High: Provides maximum illumination for detailed work (400 lumens).

Tip: For extended use, Medium setting provides the best balance of light output and energy efficiency.

Replacing the Light Source

IMPORTANT: The LED light module in the PILBLIXT lamp is integrated and not designed to be replaced by the user. If the light fails, the entire lamp unit must be replaced.

Unplug the lamp from the power outlet.
Do not attempt to open the shade or access the LED module.
Contact IKEA customer service for advice if the light fails within the warranty period.

WARNING! Attempting to replace the LED may damage the lamp, void the warranty, and create an electrical hazard.

Safety Information

Read all instructions before use.

For indoor use only.
Use on a stable, horizontal surface.
Keep away from water, moisture, and heat sources.
Do not cover the lamp or place objects on it.
Unplug before cleaning or moving.
This is not a toy. Keep out of reach of children.
Do not look directly into the LED light source.
If the cord is damaged, it must be replaced by the manufacturer or a qualified person.

Care & Cleaning

Unplug the lamp and allow it to cool completely before cleaning.

Shade and Base: Wipe with a soft, dry or slightly damp cloth. Do not use abrasive cleaners or solvents.
Cord: Wipe with a dry cloth.
Stubborn marks: Use a mild soap solution on the cloth. Never spray liquid directly onto the lamp.

CAUTION! Do not immerse any part of the lamp in water or other liquids.

Warranty Information

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms included with the product or available at www.ikea.com. The warranty covers material and manufacturing defects under normal household use for the specified period from the date of purchase. Keep your receipt as proof of purchase.

For service or warranty claims, contact your local IKEA store or visit www.ikea.com for support contact details in your country.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Not plugged in / Power outage / Faulty outlet	Check plug connection. Try a different outlet. Ensure power is on.
Touch control not responding	Wet/dirty fingers / Control area dirty	Dry your fingers. Clean the control area with a dry cloth.
Light is flickering	Loose connection / End of life	Check plug and cord connections. If persistent, the LED module may be failing.
Lamp turns off by itself	Overheating protection	Unplug and let cool. Ensure vents are not blocked. Do not cover the lamp.
Dimming not working	Incorrect touch technique	Touch and hold the control area for >1 second to cycle brightness.

Reset: Unplug the lamp for 60 seconds, then plug back in.

Service: For issues not resolved above, contact IKEA customer support.