IKEA PILBLIXT 304.999.41 Table Lamp instructions manual

The IKEA PILBLIXT 304.999.41 is a modern table lamp designed for ambient lighting, featuring a dimmable LED light source, touch-sensitive controls, and a compact, energy-efficient design. Suitable for desks, bedside tables, or living rooms. Below are key sections for safety, assembly, operation, care, and troubleshooting.

1. Features at a Glance 2. Assembly Instructions 3. First-Time Setup 4. Specifications 5. Controls and Operation 6. Light Settings & Dimming 7. Care & Maintenance 8. Safety Information 9. Warranty & Support 10. Troubleshooting

Features at a Glance

Key components: LED light module, touch-sensitive base, adjustable brightness, compact design.

Feature	Description
Light Source	Integrated, non-replaceable LED
Brightness Control	Touch-sensitive dimming (3 levels + off)
Power Input	AC 100-240V, 50/60Hz
Power Cord	1.5m with plug
Material	Plastic shade, metal base
Dimensions	Height: 25cm, Base diameter: 12cm
Weight	0.5 kg
Color Temperature	2700K (Warm White)
Energy Class	A++
Lifetime	Approx. 25,000 hours

Assembly Instructions

Unpack and inspect all parts. Ensure you have a clean, flat surface.

Place the base on a stable surface.
Attach the lamp shade to the base by aligning the grooves and twisting clockwise until secure.
Plug the power cord into the base connector.
Connect the power cord to a wall outlet.

WARNING! Do not force parts during assembly. Ensure the lamp is unplugged during assembly.

First-Time Setup

Plug in the lamp and test the touch controls.

Plug the power cord into a wall outlet.
Touch the metal base once to turn on the lamp at low brightness.
Touch repeatedly to cycle through brightness levels (Low > Medium > High > Off).
Place the lamp in the desired location, ensuring the cord is not pinched.

CAUTION! Keep away from water and heat sources. Use on a stable surface only.

Specifications

Model: PILBLIXT 304.999.41
Light Output: 300 lumens (max)
Power Consumption: 5W (max)
Input Voltage: AC 100-240V, 50/60Hz
Dimmable: Yes, 3 levels via touch control
Color Temperature: 2700K (Warm White)
Material: Plastic (shade), Metal (base)
Dimensions (HxWxD): 25 x 12 x 12 cm
Weight: 0.5 kg
Certifications: CE, RoHS, Energy Class A++

Controls and Operation

Control the lamp via the touch-sensitive metal base.

Touch Controls: Single touch toggles brightness levels (Low > Medium > High > Off). Hold touch (2 seconds) to turn off directly from any level.

Power: Plug into outlet to enable touch controls. Unplug to completely disconnect power.

Note: The lamp remembers the last brightness setting when turned off and back on.

Light Settings & Dimming

The lamp offers three brightness levels for different moods and tasks.

Low: Soft ambient light (approx. 100 lumens).
Medium: General task lighting (approx. 200 lumens).
High: Bright illumination (300 lumens).

Tip: For extended lamp life, use lower brightness levels when possible.

Care & Maintenance

Unplug the lamp before cleaning. Use a dry, soft cloth to wipe the shade and base.

CAUTION! Do not use liquids, solvents, or abrasive cleaners. Do not immerse in water.

Storage: Store in a cool, dry place away from direct sunlight.

Safety Information

This lamp complies with EU safety standards. Keep out of reach of children under 3 years. Do not use with dimmer switches (built-in dimming only). Do not cover the lamp during operation to prevent overheating. The LED light source is non-replaceable; dispose of the entire lamp according to local regulations at end of life.

Warranty & Support

IKEA limited warranty: 1 year from date of purchase. For warranty claims, contact IKEA customer service with proof of purchase. For product support, visit www.ikea.com or contact your local IKEA store.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Not plugged in / Power outage	Ensure plug is securely in outlet. Check power source.
Touch controls not working	Dirty surface / Power issue	Clean base with dry cloth. Unplug and replug.
Light flickers	Loose connection	Check plug and outlet connection. Try a different outlet.
Lamp gets warm	Normal operation	Some warmth is normal. Ensure vents are not blocked.
Light output decreases	End of LED life	LED lifetime approx. 25,000 hours. Consider replacement.

Reset: Unplug for 30 seconds, then replug to reset touch controls.

Service: For non-warranty service, contact IKEA or an authorized service center.