IKEA PELARBOJ 104.230.23 Table Lamp instructions manual

The IKEA PELARBOJ 104.230.23 is a stylish and functional table lamp designed for home or office use. It features a stable base, an adjustable shade, an integrated on/off switch, and uses a standard E27 bulb (max 13W LED or equivalent, not included). Below are key sections for safety, assembly, operation, care, and troubleshooting.

1. Package Contents & Parts 2. Safety Instructions 3. Assembly Instructions 4. Specifications 5. Operation & Controls 6. Bulb Replacement 7. Care & Cleaning 8. Troubleshooting 9. Warranty & Support

Package Contents & Parts

Before assembly, verify all parts are present and undamaged.

Part Description	Quantity
Lamp Base	1
Lamp Shade	1
Lamp Stem/Column	1
E27 Socket with Cord & Switch	1 set
Assembly Hardware (Screws/Connectors)	1 set
Instruction Manual	1

Note: Light bulb is not included.

Safety Instructions

WARNING! Read all instructions before assembly and use.

Electrical Safety: Use only with correct voltage (as marked on socket). Do not use if cord or plug is damaged.
Bulb Specification: Use only E27 base bulbs, max 13W LED or equivalent. Higher wattage may cause overheating and fire risk.
Placement: Place on a stable, level, heat-resistant surface away from edges. Keep away from water, moisture, and heat sources.
Supervision: Do not leave children unattended with the lamp. This is not a toy.
Maintenance: Always unplug the lamp before cleaning, assembly, or bulb replacement.

Assembly Instructions

Estimated assembly time: 10-15 minutes. Tools required: None (hand-tighten only).

Prepare Workspace: Unpack all parts on a clean, soft surface to prevent scratches.
Attach Stem to Base: Align the stem with the threaded hole on the base. Turn clockwise by hand until firmly secure. Do not over-tighten.
Route the Cord: Feed the power cord through the center of the stem and out the opening at the base.
Attach the Shade: Place the lamp shade over the top of the stem. It should rest securely on the provided lip or connector. Some models may require a finial to be screwed on top to secure the shade.
Final Check: Ensure all parts are firmly connected but not forced. The lamp should stand upright without wobbling.

CAUTION! Do not plug in the lamp until assembly is complete and a suitable bulb is installed.

Specifications

Product Name: PELARBOJ
Article Number: 104.230.23
Type: Table Lamp
Socket Type: E27
Max Bulb Power: 13W LED or equivalent (Bulb not included)
Power Cord Length: Approx. 1.5 meters (59 inches)
Switch Type: In-line cord switch
Materials: Base/Stem: Steel/Other materials; Shade: Fabric/Paper
Dimensions (Approx.): Height: 40 cm, Base Diameter: 15 cm
Weight: Approx. 1.2 kg

Operation & Controls

The lamp is operated via a simple on/off switch located on the power cord.

To Turn On: Press the switch to the "I" or ON position. The lamp will illuminate if a working bulb is installed.
To Turn Off: Press the switch to the "O" or OFF position.
Adjustment: The shade angle may be gently adjusted by hand for directional lighting. Do not force or bend the stem excessively.

Tip: For best light distribution, point the shade opening towards the area you wish to illuminate.

Bulb Replacement

WARNING! Always unplug the lamp and allow the bulb to cool completely before replacement.

Unplug the lamp from the electrical outlet.
Allow any old bulb to cool for at least 10 minutes if it was recently on.
Gently grip the bulb (not the glass if hot) and turn it counterclockwise to remove it from the socket.
Insert a new E27 base bulb (max 13W LED or equivalent). Screw it in clockwise by hand until snug. Do not over-tighten.
Plug the lamp back in and test with the switch.

Care & Cleaning

Always Unplug: Disconnect from power before any cleaning.
Exterior Surfaces: Wipe the base and stem with a soft, dry or slightly damp cloth. Do not use abrasive cleaners or solvents.
Lamp Shade: Dust gently with a soft brush or a vacuum cleaner with a soft brush attachment. For fabric/paper shades, avoid moisture. Do not immerse in water.
Cord: Wipe with a dry cloth. Do not pull the cord to disconnect from the outlet.

CAUTION! Never immerse any part of the lamp in water or other liquids.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	No power / Faulty bulb / Loose connection	Check if outlet works; ensure lamp is plugged in. Replace bulb. Check bulb is screwed in properly.
Lamp flickers	Loose bulb / Faulty bulb / Poor socket contact	Turn off, unplug, and reseat the bulb. Try a different bulb.
Lamp gets very hot	Bulb wattage too high	Immediately turn off and unplug. Replace with a bulb of correct max wattage (13W LED or equivalent).
Lamp is wobbly	Assembly not tight / Uneven surface	Check and tighten all connections by hand. Place on a flat, stable surface.
Switch does not work	Switch mechanism faulty	Do not attempt to repair the switch. Contact IKEA for support or replacement.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms provided at the time of purchase or on www.ikea.com.

For assistance:
Visit: www.ikea.com
Contact your local IKEA store.
Have your article number (104.230.23) and receipt ready.

Recycling: At end of life, do not dispose with household waste. Recycle according to local regulations for electrical products.