IKEA PAX 393.856.95 Shelves instructions manual

The IKEA PAX 393.856.95 is a versatile shelving system designed for the PAX wardrobe frame. It features adjustable shelves, sturdy construction, and compatibility with various PAX interior organizers. Below are key sections for safety, components, assembly, installation, adjustment, care, and troubleshooting.

1. Features at a Glance 2. Package Contents 3. Tools Required 4. Assembly Instructions 5. Installation into PAX Frame 6. Adjusting Shelf Height 7. Weight Capacity & Limitations 8. Care & Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Adjustable shelves, shelf supports, mounting hardware, and instructions.

Feature	Description
Adjustable shelves	Can be positioned at different heights within the PAX frame
Sturdy construction	Made from particleboard with melamine foil finish
Compatibility	Designed for PAX wardrobe frames of various widths
Easy installation	Uses pre-drilled holes and shelf support pins
Weight capacity	Designed to hold clothing and lightweight items

Package Contents

Unpack and verify all parts before starting assembly.

Shelves (quantity varies by package)
Shelf support pins (4 per shelf)
Assembly instructions (this manual)
Mounting hardware (if included)

WARNING! Check for damaged parts before assembly. Contact IKEA for replacements if needed.

Tools Required

Gather these tools before beginning assembly.

Phillips screwdriver
Hammer (for tapping pins if needed)
Tape measure
Level (optional, for ensuring shelves are straight)

CAUTION! Use appropriate tools to avoid damaging parts or injuring yourself.

Assembly Instructions

Step 1: Identify all shelf components and hardware.
Step 2: Insert shelf support pins into the pre-drilled holes on the inside of the PAX frame at desired heights.
Step 3: Place the shelf onto the support pins, ensuring it sits evenly on all four pins.
Step 4: Check that the shelf is level and secure.
Step 5: Repeat for additional shelves.

Installation into PAX Frame

Ensure PAX frame is properly assembled and secured to wall per IKEA instructions.

Determine desired shelf heights based on your storage needs.
Locate pre-drilled holes on the inner sides of the PAX frame.
Insert shelf support pins into corresponding holes (usually 4 pins per shelf).
Carefully place shelf onto pins, applying even pressure.
Test stability by applying gentle pressure to the center of the shelf.

Tip: Install shelves starting from the bottom upward for easier alignment.

Adjusting Shelf Height

Shelves can be repositioned as needed.

Remove all items from the shelf.
Lift shelf straight up and off the support pins.
Remove support pins from current holes using pliers if necessary.
Insert pins into new desired holes at preferred height.
Replace shelf onto new pin positions.
Verify shelf is level and secure before reloading items.

WARNING! Always empty shelf before adjusting to prevent items from falling.

Weight Capacity & Limitations

Maximum weight per shelf: 66 lbs (30 kg) evenly distributed.

Do not exceed weight limit. Avoid placing excessively heavy items or overloading shelves. Distribute weight evenly across shelf surface.

Care & Maintenance

Clean with damp cloth and mild detergent. Dry immediately.

CAUTION! Do not use abrasive cleaners, scouring pads, or harsh chemicals that may damage the melamine surface.

Safety Information

Secure PAX frame to wall using included wall attachment device to prevent tipping. Ensure shelves are properly seated on all support pins before loading. Keep children away during assembly. Use appropriate safety equipment if needed.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Shelf won't fit	Wrong PAX frame size	Verify compatibility with your PAX frame width/depth.
Shelf wobbles	Uneven pins or not fully seated	Check that all pins are at same height and shelf is fully seated on all pins.
Pins won't stay in	Worn holes or incorrect pins	Try different holes; ensure using correct IKEA pins.
Shelf sags	Overloaded or weight uneven	Reduce weight; distribute items evenly across shelf.
Difficulty adjusting	Pins stuck or damaged	Use pliers to gently remove pins; replace if damaged.

Support: For missing parts or assembly help, contact IKEA customer service or visit www.ikea.com.