IKEA PAX 099.054.66 Wardrobe Frame instructions manual

The IKEA PAX 099.054.66 is a versatile wardrobe frame system designed for customizable storage solutions. It features a sturdy metal and particleboard construction, adjustable interior fittings, multiple finish options, and compatibility with various PAX doors and interior organizers. Below are key sections for safety, components, assembly, installation, configuration, care, and troubleshooting.

1. Components & Hardware 2. Safety Instructions 3. Assembly Preparation 4. Step-by-Step Assembly 5. Mounting to Wall 6. Interior Configuration 7. Door Installation 8. Care & Maintenance 9. Specifications 10. Warranty & Support 11. Troubleshooting

Components & Hardware

Key components included: Wardrobe frame panels, top panel, base panel, back panel, suspension rail, mounting brackets, screws, cam locks, dowels, and assembly tools.

Component	Description
Side panels (2)	Main vertical frame pieces with pre-drilled holes
Top panel	Horizontal piece connecting top of wardrobe
Base panel	Bottom horizontal piece with adjustable feet
Back panel	Fiberboard panel for structural stability
Suspension rail	Metal rail for hanging clothes
Mounting brackets	For securing wardrobe to wall
Cam locks and dowels	Connector system for panel assembly
Adjustable feet (4)	For leveling on uneven floors
Assembly tool	Hex key included for cam lock tightening
Screws and wall anchors	For wall mounting and hardware attachment

Safety Instructions

Read all instructions before assembly. Ensure safe handling and installation.

Assembly requires two people: Frame pieces are large and heavy.
Secure to wall: Always use included brackets to prevent tipping.
Check wall type: Use appropriate anchors for drywall, studs, or masonry.
Use on level floor: Adjust feet to ensure stability.

WARNING! Unsecured wardrobes can tip over and cause serious injury. Always mount to wall using provided hardware.

Assembly Preparation

Prepare your workspace and verify all parts.

Unpack all components: Check against parts list in manual.
Clear assembly area: Provide space to lay out panels.
Gather tools: Hex key (included), Phillips screwdriver, hammer, level, pencil.
Identify panels: Note orientation based on pre-drilled holes.

CAUTION! Handle panels carefully to avoid damaging edges or surfaces.

Step-by-Step Assembly

Attach base panel: Connect to side panels using cam locks and dowels.
Install top panel: Align with side panels and secure with cam locks.
Insert back panel: Place into grooves on side, top, and base panels.
Secure back panel: Attach with provided screws along edges.
Install suspension rail: Mount at desired height inside frame.
Attach adjustable feet: Screw into base panel corners.
Check squareness: Ensure frame is square before tightening all locks fully.

Tip: Do not fully tighten cam locks until all panels are connected and aligned.

Mounting to Wall

Essential for safety and stability.

Position wardrobe: Place in desired location against wall.
Level the unit: Adjust feet until frame is plumb and level.
Locate wall studs: Use stud finder for secure attachment.
Mark bracket holes: Through bracket holes onto wall.
Drill pilot holes: For screws or wall anchors as needed.
Attach brackets: Secure to wall with screws.
Secure wardrobe: Screw frame to brackets through side panel.

WARNING! If no studs are available, use appropriate wall anchors rated for wardrobe weight.

Interior Configuration

Customize with PAX interior fittings.

Shelves: Adjustable height with shelf pins.
Drawers: Compatible with PAX drawer systems.
Clothing rails: Single or double hanging options.
Baskets and organizers: Various accessories available.

Installation: Follow accessory-specific instructions. Ensure weight limits are observed.

Door Installation

For PAX compatible doors (sold separately).

Hinge preparation: Attach hinges to door as per door instructions.
Mount hinges to frame: Align with pre-drilled holes on side panel.
Adjust doors: Use hinge screws to align doors vertically and horizontally.
Install handles: Attach to doors as desired.

Note: Door weight may affect frame balance. Ensure wall mounting is secure.

Care & Maintenance

Clean with damp cloth; avoid abrasive cleaners.

Surface care: Wipe with mild soap solution; dry immediately.
Hardware check: Periodically tighten cam locks and screws.
Adjust feet: Re-level if floor settles or wardrobe is moved.

CAUTION! Do not use harsh chemicals, wax, or polish on surfaces.

Specifications

Frame dimensions: Height: 201 cm, Width: 100 cm, Depth: 58 cm.
Material: Particleboard, foil, ABS plastic, steel.
Weight capacity: Suspension rail: 30 kg max.
Adjustable shelf load: 15 kg per shelf.
Finish: White, birch effect, or black-brown (as per model).
Compatibility: PAX doors and interior organizers system.

Warranty & Support

IKEA limited warranty applies. See IKEA warranty terms for details.

For missing parts or assembly support: Contact IKEA customer service or visit www.ikea.com. Provide article number (099.054.66) and proof of purchase.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Frame wobbles	Uneven floor, loose connections	Adjust feet for level; tighten all cam locks and screws.
Doers not aligning	Hinge adjustment needed	Use hinge screws to adjust door height and gap.
Shelves sagging	Overloaded or pins not secure	Reduce weight; ensure shelf pins are fully inserted.
Difficulty assembling	Parts misaligned	Disassemble step; ensure dowels and cam locks align before tightening.
Back panel bulging	Not seated in grooves	Loosen screws; ensure panel fits into all grooves; re-tighten.

Safety Check: Regularly verify wall mounting is secure.

Support: IKEA customer service: 1-888-888-4532; www.ikea.com