IKEA PAX 094.297.28 Wardrobe Frame instructions manual

The IKEA PAX 094.297.28 is a versatile wardrobe frame system designed for flexible storage solutions. It features a sturdy metal and particleboard construction, adjustable interior components, multiple configuration options, and compatibility with various PAX doors and interior organizers. Below are key sections for safety, parts identification, assembly, installation, configuration, care, and troubleshooting.

1. Parts and Components 2. Safety Information 3. Tools Required 4. Assembly Instructions 5. Installation and Mounting 6. Interior Configuration 7. Door Installation 8. Care & Maintenance 9. Specifications 10. Troubleshooting

Parts and Components

Key components: Wardrobe frame panels, top rail, bottom rail, back panel, mounting brackets, screws, cam locks, dowels, and assembly hardware.

Part	Description
Side panels (2)	Main vertical frame pieces with pre-drilled holes
Top panel	Horizontal top piece connecting side panels
Bottom panel	Horizontal base piece with adjustable feet
Back panel	Fiberboard panel for structural stability
Mounting brackets	For securing wardrobe to wall
Cam locks and dowels	For connecting panels securely
Adjustable feet (4)	For leveling on uneven floors
Rail system	For hanging clothes (if included)
Assembly hardware	Screws, wall anchors, and tools provided
Instruction manual	This document

Safety Information

Read all instructions before assembly. Ensure proper handling and installation.

Assembly: Requires two people. Lift with legs, not back.
Mounting: MUST be securely attached to wall to prevent tipping.
Location: Place on solid, level floor. Use adjustable feet for stability.
Children: Do not allow climbing or playing on wardrobe.

WARNING! Serious or fatal crushing injuries can occur from furniture tip-over. Always secure to wall using provided hardware.

Tools Required

Tools included: Allen key, cam lock tool. Tools needed: Phillips screwdriver, hammer, level, measuring tape, pencil.

Check package contents against parts list before starting.
Prepare workspace: Clear area with enough space to lay out parts.
Protect floor: Use cardboard or blanket to prevent scratches.
Organize hardware: Separate screws, dowels, and cam locks for easy access.

CAUTION! Using incorrect tools may damage parts or result in improper assembly.

Assembly Instructions

Step 1: Attach adjustable feet to bottom panel.
Step 2: Connect side panels to bottom panel using cam locks and dowels.
Step 3: Install top panel to side panels.
Step 4: Secure back panel with provided screws.
Step 5: Install interior rails or shelves according to configuration.
Step 6: Attach mounting brackets to top back of frame.
Step 7: Level wardrobe using adjustable feet.
Step 8: Secure to wall using brackets and wall anchors.

Installation and Mounting

Proper wall mounting is critical for safety.

Locate wall studs using stud finder. Mark positions.
Position wardrobe against wall in desired location.
Level frame using adjustable feet.
Attach mounting brackets to wall studs using provided screws.
Secure wardrobe to brackets through pre-drilled holes in back panel.
Test stability by gently pulling forward from top.

Tip: If studs are not available, use appropriate wall anchors for your wall type (drywall, plaster, etc.).

Interior Configuration

PAX system allows flexible interior organization.

Shelves: Adjust height using shelf pins in pre-drilled holes.
Hanging rails: Install at desired height for short/long garments.
Drawers: Compatible with PAX drawer units (sold separately).
Accessories: Add tie/belt racks, shoe shelves, or jewelry organizers.
Adjustment: Reconfigure as needed by moving shelf pins and rails.

WARNING! Do not exceed weight limits: Shelves 33 lbs (15 kg), hanging rail 66 lbs (30 kg) distributed evenly.

Door Installation

Compatible with various PAX doors (sold separately).

Hinged doors: Attach hinges to side panels at marked positions.
Sliding doors: Install top track first, then bottom guide.
Alignment: Adjust hinges or rollers for proper alignment and smooth operation.
Handles: Attach according to door style instructions.

CAUTION! Ensure doors are properly installed and adjusted to prevent pinching or misalignment.

Care & Maintenance

Clean with damp cloth; avoid abrasive cleaners.

Regular care: Dust with soft, dry cloth. For stains, use mild soap solution and dry immediately.

Adjustments: Check and tighten screws periodically. Re-level if floor settles.

CAUTION! Do not use harsh chemicals, abrasive pads, or excessive water which may damage surfaces.

Specifications

Model: PAX 094.297.28
Dimensions: 39 3/8" W x 22 7/8" D x 93 1/8" H (100x58x236 cm)
Material: Particleboard, fiberboard, steel, plastic
Finish: White foil
Weight capacity: Varies by component (see labels)
Adjustable interior: Yes, with 1" increments
Wall mounting: Required, hardware included
Compatibility: All PAX doors and interior organizers
Warranty: 10-year limited warranty

Troubleshooting

Symptom	Possible Cause	Corrective Action
Wardrobe wobbles	Uneven floor, loose connections	Adjust feet for level; tighten all cam locks and screws.
Doors not closing properly	Misaligned hinges/track	Adjust hinge screws or track alignment.
Shelves sagging	Overloaded, pins not seated	Reduce weight; ensure shelf pins are fully inserted.
Difficulty assembling	Parts misidentified, wrong hardware	Review instructions; verify part numbers and hardware.
Back panel bulging	Screws not tight, panel reversed	Tighten all back panel screws; ensure smooth side faces inward.

Missing parts: Contact IKEA customer service with product number and part needed.

Service: IKEA customer support: 1-888-888-4532; www.ikea-usa.com