IKEA PANGET 604.741.66 Table instructions manual

The IKEA PANGET 604.741.66 is a versatile table designed for assembly at home. This manual provides step-by-step instructions for safe and correct assembly, including required tools, parts identification, assembly sequence, safety warnings, care guidelines, and troubleshooting tips. Ensure you read all instructions before beginning assembly.

1. Parts & Tools Checklist 2. Safety Instructions 3. Assembly Steps 4. Table Specifications 5. Care & Maintenance 6. Warranty Information 7. Troubleshooting

Parts & Tools Checklist

Before starting, verify all parts are present and gather necessary tools.

Part Number	Description	Quantity
100001	Tabletop	1
100002	Table leg	4
100003	Metal frame connector	1
100004	Screw A (large)	8
100005	Screw B (small)	16
100006	Plastic caps	8
100007	Allen key (included)	1

Required Tools: Phillips screwdriver (not included), rubber mallet (optional).

Safety Instructions

Follow these guidelines to ensure safe assembly and use.

Assemble on a soft, clean surface to avoid scratches.
Keep small parts away from children and pets.
Do not overtighten screws; tighten until snug only.
Use two people for lifting and positioning the tabletop.
Ensure the table is on a level, stable surface before use.

WARNING! Do not stand or sit on the table. Maximum load capacity: 50 kg (110 lbs).

Assembly Steps

Assemble in the order shown below. Allow 30-45 minutes for completion.

Attach legs to frame: Place frame upside down. Insert legs into corner sockets. Secure each leg with 2 Screw B using the Allen key.
Attach frame to tabletop: With help, flip frame upright and position centrally under tabletop. Align screw holes. Secure with 8 Screw A using the screwdriver.
Insert plastic caps: Press plastic caps into screw holes on legs to conceal screws.
Final check: Ensure all screws are tight and legs are firmly attached. Wipe clean with a dry cloth.

Tip: Do not fully tighten screws until all are in place to allow for alignment adjustments.

Table Specifications

Model: PANGET 604.741.66
Dimensions (assembled): 120 cm L × 60 cm W × 75 cm H (47" × 24" × 30")
Tabletop Material: Particleboard with melamine laminate
Leg Material: Powder-coated steel
Weight Capacity: 50 kg (110 lbs) evenly distributed
Color: White
Packaged Weight: 15 kg (33 lbs)

Care & Maintenance

Proper care will extend the life of your table.

Clean with a damp, soft cloth and mild detergent. Wipe dry immediately.
Avoid abrasive cleaners, solvents, or scouring pads.
Protect from direct sunlight and heat sources to prevent fading or warping.
Use coasters under hot or wet items to prevent surface damage.
Periodically check and tighten screws if needed.

CAUTION! Do not place heavy objects on edges. Avoid dragging the table across floors.

Warranty Information

IKEA limited warranty applies. Retain your receipt as proof of purchase.

Warranty Period: 10 years from date of purchase for manufacturing defects.
Coverage: Covers defects in materials and workmanship under normal household use.
Exclusions: Damage from improper assembly, accidents, misuse, or commercial use.
Support: For warranty claims or missing parts, contact IKEA customer service or visit www.ikea.com.

Troubleshooting

Issue	Possible Cause	Solution
Table wobbles	Uneven floor; loose legs	Check floor level; tighten all leg screws securely.
Screw won't tighten	Cross-threaded or stripped	Remove screw, realign, and insert carefully. Do not force.
Leg doesn't fit	Wrong orientation	Ensure leg is aligned with socket markings; rotate if needed.
Scratches on surface	Assembly on hard surface	Assemble on carpet or blanket. Use touch-up paint for minor scratches.
Missing parts	Packaging error	Contact IKEA customer service with model number and part list.

Note: For persistent issues, disassemble and reassemble following steps carefully.

Contact: IKEA customer support at 1-888-888-4532 or www.ikea.com.