IKEA OLOFSJÖN 693.935.33 Sink instructions manual

The IKEA OLOFSJÖN 693.935.33 is a stainless steel kitchen sink designed for durability and easy cleaning. It features a single bowl design, integrated overflow, pre-drilled tap holes, sound-absorbing undercoating, and is compatible with standard kitchen cabinets. Below are key sections for safety, features, installation, care, and troubleshooting.

Features at a Glance

Key components: Stainless steel bowl, Overflow opening, Pre-drilled tap holes (for mixer tap), Sound-absorbing undercoating, Mounting clips, Drain assembly.

Installation Requirements

Before installation, ensure you have the proper tools and workspace.

1. Tools Required: Adjustable wrench, screwdriver, silicone sealant gun, measuring tape, pencil, bucket, cloth.
2. Materials Required: Silicone sealant (kitchen/bathroom grade), plumber's putty (optional for drain), mounting clips (included), drain assembly (included).
3. Cabinet Preparation: Ensure countertop cutout matches sink dimensions (check template). Cutout should be clean and smooth.
4. Plumbing Check: Verify water supply lines and drain pipes are accessible and in good condition.

WARNING! Sink edges are sharp; handle with care. Use protective gloves during installation.

Step-by-Step Installation

Follow these steps for proper installation.

1. Prepare Countertop: Clean cutout area thoroughly. Remove any debris or old sealant.
2. Test Fit: Place sink into cutout without sealant to ensure proper fit and alignment.
3. Apply Sealant: Run a continuous bead of silicone sealant along the underside of the sink rim.
4. Position Sink: Carefully lower sink into cutout, ensuring it sits evenly. Press down firmly.
5. Secure Mounting Clips: Attach mounting clips to sink underside as per instructions. Tighten screws to secure sink to countertop.
6. Install Drain Assembly: Apply plumber's putty to drain flange, insert into drain hole, tighten from below.
7. Connect Plumbing: Attach P-trap and water supply lines to faucet (if installing).
8. Clean Excess Sealant: Wipe away excess silicone with damp cloth before it dries.
9. Curing Time: Allow sealant to cure for 24 hours before using sink.

CAUTION! Do not use sink until sealant is fully cured to prevent leaks.

Specifications

• Model Number: OLOFSJÖN 693.935.33
• Material: 18/10 Stainless Steel
• Bowl Depth: 200 mm
• Overall Dimensions: 500 x 500 mm
• Cutout Dimensions: 480 x 480 mm (refer to template for exact size)
• Weight: 4.5 kg
• Tap Hole Diameter: 35 mm (standard)
• Drain Opening: 3.5 inches (standard)
• Overflow: Yes
• Sound Dampening: Yes, undercoating applied
• Installation Type: Top-mount (drop-in)
• Warranty: Refer to IKEA warranty terms

Mounting and Sealing

Proper mounting ensures stability and prevents leaks.

Mounting Clips: Use all provided clips (typically 6-8). Position clips evenly around sink perimeter. Tighten screws gradually and alternately to avoid uneven pressure.

Sealant Application: Use 100% silicone sealant rated for kitchens. Apply bead approximately 5mm thick. Ensure no gaps in bead, especially at corners.

Alignment: Sink should be flush with countertop. Check level from multiple angles.

Final Check: After tightening clips, wipe interior and exterior to remove fingerprints or sealant residue.

Connecting Plumbing

Connect drain and water supply after sink is secured.

1. Drain Connection: Attach rubber gasket and metal ring to drain assembly. Insert into sink drain hole from top. Secure with locknut from below.
2. P-Trap Installation: Connect drain pipe to P-trap, then to wall drain. Ensure all connections are hand-tight plus quarter turn with wrench.
3. Faucet Installation: Insert faucet through pre-drilled hole. Secure with mounting nut from below. Connect hot/cold water lines.
4. Overflow Connection: Connect overflow hose to drain assembly (if separate).
5. Leak Test: Fill sink with water, check for leaks at drain and faucet connections. Also check sealant bead around rim.

Tip: Use thread seal tape on all threaded plumbing connections to prevent leaks.

Care & Maintenance

Proper care maintains appearance and longevity.

1. Daily Cleaning: Use mild dish soap and warm water. Rinse thoroughly. Dry with soft cloth to prevent water spots.
2. Stain Removal: For mineral deposits or hard water stains, use vinegar solution (1:1 water/vinegar). Apply, let sit 5 minutes, rinse.
3. Scratch Prevention: Avoid abrasive cleaners, steel wool, or harsh chemicals. Use non-scratch sponges.
4. Protect Finish: Do not leave acidic foods (lemon juice, tomato sauce) or wet steel items in sink for extended periods.
5. Drain Maintenance: Regularly clean drain strainer. Use drain cleaner monthly to prevent clogs.

CAUTION! Never use chlorine bleach or oven cleaners on stainless steel. Avoid cutting directly on sink surface.

Safety Information

Important safety notices for installation and use.

• Sharp Edges: Sink edges can be sharp. Handle with care during installation.
• Hot Surfaces: Sink can become hot from hot water. Use caution.
• Proper Support: Ensure cabinet provides adequate support for sink and countertop.
• Child Safety: Never leave children unattended near filled sink.
• Electrical Safety: Keep electrical appliances away from sink area to prevent shock hazard.
• Chemical Safety: Do not mix cleaning chemicals in sink. Ensure proper ventilation when using strong cleaners.

WARNING! This sink is not designed to bear excessive weight. Do not stand or sit in sink.

Warranty & Support

IKEA limited warranty applies. See warranty card for details.

Warranty Coverage: Typically covers manufacturing defects in materials and workmanship for specified period from date of purchase.

Exclusions: Damage from improper installation, misuse, accidents, or normal wear and tear.

Support Contact: For assistance, contact IKEA customer service:

• Phone: 1-888-888-4532
• Website: www.ikea.com
• Store Locator: Visit website for nearest IKEA store

Spare Parts: Mounting clips, drain assemblies, and other parts available through IKEA.

Troubleshooting

Professional Help: If problems persist, contact professional plumber or IKEA service.

Replacement Parts: Available at IKEA or authorized dealers.