IKEA OBEGRÄNSAD 705.262.59 Wall Lamp instructions manual

The IKEA OBEGRÄNSAD 705.262.59 is a modern wall lamp designed for ambient lighting. It features a clean, minimalist design suitable for various interior styles. This manual provides essential information for safe unpacking, assembly, installation, operation, maintenance, and troubleshooting of your wall lamp. Please read all instructions carefully before proceeding.

1. Package Contents & Safety 2. Tools Required 3. Assembly Instructions 4. Wall Mounting & Installation 5. Electrical Connection 6. Operation 7. Care & Maintenance 8. Specifications 9. Troubleshooting 10. Warranty & Support

Package Contents & Safety

Before assembly, verify all parts are present and undamaged.

Part Description	Quantity	Check
Wall lamp shade/body	1	□
Mounting bracket	1	□
Screws & wall plugs	Set	□
Instruction manual	1	□

WARNING! Always disconnect from power before installation or maintenance. Installation should be performed by a qualified electrician if you are unsure. Ensure the wall can support the lamp's weight. Keep packaging away from children.

Tools Required

You will need the following tools (not included):

Phillips screwdriver
Drill (for masonry walls)
Spirit level
Pencil for marking
Wire strippers/cutters (for electrical connection)
Screwdriver for terminal block

Assembly Instructions

Assemble the lamp components before mounting to the wall.

Lay all parts on a clean, soft surface.
If applicable, attach the lamp shade or diffuser to the main body as per the diagram. This usually involves aligning and twisting or securing with small screws.
Ensure all connections between parts are secure but do not over-tighten.
Do not connect to power during assembly.

CAUTION! Handle glass or plastic shades with care to avoid cracks or breaks.

Wall Mounting & Installation

Choose a suitable location near a power source.

Turn off power at the circuit breaker for the installation area.
Hold the mounting bracket against the wall in the desired position. Use a spirit level to ensure it is straight.
Mark the screw holes with a pencil.
Drill holes at the marks and insert the provided wall plugs (for solid walls).
Secure the mounting bracket to the wall using the provided screws.
Ensure the bracket is firmly attached and does not wobble.

Electrical Connection

WARNING! Risk of electric shock. If uncertain, hire a qualified electrician.

With power still OFF, route the lamp's power cable to your wall's electrical outlet or junction box.
For direct wiring: Connect the lamp wires (Brown/Live, Blue/Neutral, Green-Yellow/Earth) to the corresponding mains wires in your wall using the terminal block. Tighten screws securely.
For plug connection: Simply plug the cord into a nearby grounded outlet.
Once connected, carefully tuck all wires into the mounting bracket or cover.
Attach the assembled lamp body to the mounted bracket, typically by aligning and sliding or securing with final screws.
Install the recommended light bulb (see Specifications). Do not exceed the maximum wattage.

Operation

Once installed and the bulb is in place:

Restore power at the circuit breaker.
Use the wall switch or cord switch (if present) to turn the lamp ON/OFF.
The lamp is designed for ambient lighting. Avoid looking directly at the light source.

Tip: For optimal light distribution and energy efficiency, use an LED bulb.

Care & Maintenance

Always disconnect from power before cleaning.

Use a dry, soft cloth to dust the lamp shade and body.
For tougher stains on non-electrical parts, use a slightly damp cloth. Dry immediately.
Never use abrasive cleaners, solvents, or chemicals.
Replace the light bulb only when the lamp is cool to the touch.

CAUTION! Do not immerse any part of the lamp in water or other liquids.

Specifications

Article Number: 705.262.59
Product Name: OBEGRÄNSAD
Type: Wall Lamp
Max. Bulb Wattage: [e.g., 60W E27 or 10W LED equivalent] (Refer to label on product)
Bulb Base: E27 / E26 (Check product label)
Voltage: 120V AC, 60Hz (for North American market)
Material: Steel/Plastic/Glass (as per specific model)
Color: As purchased (e.g., White, Black)
Dimensions: Height x Width x Depth (Refer to IKEA packaging)

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Power outage; Bulb burnt out; Loose connection	Check other lights; Replace bulb; Ensure lamp is securely connected to power and switch is ON.
Lamp flickers	Loose bulb; Faulty bulb; Loose wiring	Turn off, ensure bulb is screwed in tightly. Try a new bulb. Check wiring connections.
Lamp gets very hot	Bulb wattage too high; Enclosed fixture	Use a bulb with wattage equal to or less than the maximum rating. Ensure adequate ventilation.
Lamp is loose on wall	Bracket not secure; Screws in wrong wall type	Turn off power. Reinforce mounting with appropriate wall anchors for your wall material (drywall, masonry).
Unusual noise (buzz/hum)	Transformer (if LED driver); Loose part	Some electronic drivers hum slightly. Ensure all screws and parts are tightened. If excessive, contact support.

Warranty & Support

This IKEA product is guaranteed under the terms of IKEA's commercial warranty. Please refer to the IKEA warranty leaflet included in the packaging or available at IKEA stores for full details.

For assembly help, missing parts, or product support:

Visit: www.ikea.com
Contact your local IKEA store.
Refer to the specific country customer service contact information on your receipt or IKEA website.

Safety Standards: This product complies with applicable UL/CSA standards for the region of sale.