IKEA NÄVLINGE 004.049.25 Work Lamp instructions manual

The IKEA NÄVLINGE 004.049.25 is a versatile work lamp designed for focused illumination on desks, workbenches, or reading areas. It features an adjustable arm and head for precise light direction, an energy-efficient LED light source, an integrated on/off switch, and a stable base. Below are key sections for safety, assembly, operation, care, and troubleshooting.

1. Features at a Glance 2. Assembly Instructions 3. First-Time Setup 4. Specifications 5. Controls and Operation 6. Positioning and Adjustment 7. Replacing the Light Source 8. Safety Information 9. Care & Cleaning 10. Warranty & Support 11. Troubleshooting

Features at a Glance

Key components: Adjustable lamp head, Flexible gooseneck arm, Stable weighted base, Integrated on/off switch, Energy-efficient LED module.

Feature	Description
Adjustable lamp head	Rotates and tilts to direct light precisely where needed
Flexible gooseneck arm	Allows height and angle adjustment for optimal positioning
Stable weighted base	Provides balance and prevents tipping during adjustment
Integrated on/off switch	Conveniently located on the base or cord for easy access
Energy-efficient LED	Long-lasting, cool light source with low power consumption
Power cord	Standard plug for 120V AC outlets

Assembly Instructions

Unpack all parts and check contents against the included parts list.

Attach the base: Screw the base plate to the bottom of the weighted stand.
Connect the arm: Insert the lower end of the gooseneck arm into the socket on the base and tighten the securing ring.
Attach the lamp head: Connect the lamp head to the top of the arm and secure it by tightening the provided bolt.
Route the cord: Guide the power cord through the channel in the arm if applicable, ensuring it is not pinched.

WARNING! Assemble on a soft surface to avoid scratching. Ensure all connections are tight before use.

First-Time Setup

Place the lamp on a stable, flat surface near a power outlet.

Position the lamp: Place the base where you want the lamp, ensuring the cord can reach the outlet without strain.
Plug in: Connect the power cord to a standard 120V AC outlet.
Test the switch: Press the on/off switch to ensure the LED lights up.
Adjust the light: Bend the arm and tilt the head to direct light onto your work area.

CAUTION! Do not place the lamp where the cord presents a tripping hazard. Keep away from water sources.

Specifications

Model: NÄVLINGE 004.049.25
Light Source: Integrated non-replaceable LED.
Power Consumption: 5W (equivalent to 40W incandescent).
Color Temperature: 4000K (cool white).
Luminous Flux: 400 lumens.
Adjustability: 360° head rotation, 180° tilt, flexible arm.
Power Supply: 120V AC, 60Hz.
Cord Length: 5.9 feet (1.8 meters).
Materials: Steel, plastic, weighted metal base.

Controls and Operation

The lamp is operated via a single on/off switch.

Switch: Located on the base or inline on the power cord. Press once to turn the LED on, press again to turn it off.

Adjustment: The lamp has no brightness or color controls. The light level is fixed. To change the illuminated area, physically adjust the arm and head.

Positioning and Adjustment

For optimal task lighting, position the lamp to the side of your work to reduce glare and shadows.

Loosen the arm: Gently bend the gooseneck to the desired height and angle.
Adjust the head: Tilt and rotate the lamp head to focus the light beam directly on your task (e.g., book, keyboard, craft).
Secure the position: The arm and head should hold their position once released. Avoid excessive force.

Tip: Position the lamp so the light source is not directly visible to your eyes to prevent glare.

Replacing the Light Source

This model features an integrated, non-replaceable LED light module.

The LED is designed to last for the lifetime of the product under normal use.
If the light fails, the entire lamp unit must be replaced. Do not attempt to open the lamp head.

WARNING! The lamp contains no user-serviceable parts. Do not disassemble. Risk of electric shock.

Safety Information

Read all instructions before use. For indoor use only.

Unplug before cleaning or when not in use for extended periods.
Do not use in bathrooms or other high-moisture areas.
Do not cover the lamp or place objects on it while in operation.
Keep away from children. The flexible arm is not a toy.
Do not use with dimmer switches or timers unless specified as compatible.

Care & Cleaning

Unplug the lamp from the outlet before cleaning.

Use a soft, dry or slightly damp cloth to wipe the base, arm, and lamp head.
Do not use abrasive cleaners, solvents, or chemical sprays.
Ensure the lamp is completely dry before plugging it back in.

CAUTION! Never immerse the lamp in water or other liquids. Do not spray cleaners directly onto the product.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty document included with your purchase or available at IKEA stores for specific terms and duration.

For assembly help, spare parts, or other support:

Visit: www.ikea.com
Contact your local IKEA store.
Refer to the product number: 004.049.25

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	No power / faulty switch	Check if the plug is securely in the outlet. Try a different outlet. Ensure the switch is pressed firmly to the "on" position.
Light flickers or is dim	Loose connection / end of life	Check all connections from the outlet to the lamp. If the LED is flickering consistently, the integrated module may be failing.
Lamp arm will not hold position	Wear or damage	Over time, the arm may loosen. Gently bend it back to the desired shape. Avoid holding it by the head when adjusting.
Lamp feels unstable	Base not assembled correctly	Ensure the base is fully assembled and all screws are tightened. Place on a level surface.
Lamp head is loose	Pivot joint needs tightening	Check the bolt connecting the head to the arm and tighten if possible (do not over-tighten).

Disposal: Dispose of this product according to local regulations for electronic waste. Do not dispose of with household trash.

Service: This product is not user-serviceable. For issues, contact IKEA support.