IKEA NÄMMARÖ 305.103.02 Bench instructions manual

The IKEA NÄMMARÖ 305.103.02 is an outdoor bench designed for durability and comfort. Constructed from weather-resistant materials, it features a slatted seat and backrest, sturdy frame, and a finish suitable for patios, gardens, or balconies. Below are key sections for safety, parts list, assembly, care, and warranty.

1. Parts & Tools 2. Safety Instructions 3. Assembly Steps 4. Specifications 5. Care & Maintenance 6. Warranty Information 7. Troubleshooting

Parts & Tools

Inspect all parts before assembly. Ensure you have the required tools.

Part Number	Description	Quantity
1001	Bench Seat Slat	5
1002	Bench Backrest Slat	4
1003	Side Frame (Left)	1
1004	Side Frame (Right)	1
1005	Front/Back Rail	2
1006	Backrest Support	2
1007	Wood Screw 4x40mm	24
1008	Hex Key (Allen Wrench)	1

Tools Required: Phillips screwdriver (optional), rubber mallet.

Safety Instructions

Read all instructions before assembly. Keep children and pets away during assembly.

Work Area: Assemble on a clean, flat, stable surface.
Lifting: Bench is heavy; use two people to lift and move.
Hardware: Check all screws and bolts are tightened securely.
Inspection: Regularly inspect for loose parts or damage, especially before use.

WARNING! Do not exceed the maximum weight capacity. Avoid placing on uneven surfaces.

Assembly Steps

Follow steps in order. Do not fully tighten screws until all parts are aligned.

Step 1: Attach side frames (1003, 1004) to front and back rails (1005) using screws (1007). Use hex key provided.
Step 2: Secure backrest supports (1006) to the rear of the side frames.
Step 3: Place seat slats (1001) onto the frame, spacing evenly. Secure each slat with screws from underneath.
Step 4: Attach backrest slats (1002) to the backrest supports, spacing evenly. Secure with screws.
Step 5: Check all screws are tight. Wipe clean with a dry cloth.

Tip: Use a rubber mallet to gently tap parts into place if needed. Do not force.

Specifications

Product Name: NÄMMARÖ Bench
Article Number: 305.103.02
Dimensions (LxWxH): 120cm x 60cm x 85cm
Seat Height: 45cm
Weight Capacity: 200 kg (evenly distributed)
Material: Acacia wood, powder-coated steel
Finish: Stained brown, weather-resistant
Indoor/Outdoor Use: Outdoor (recommended for covered areas)

Care & Maintenance

Proper care extends the life of your bench.

Cleaning: Wipe with a soft, damp cloth. Use mild soap if needed. Rinse with clean water and dry thoroughly.
Protection: Apply a wood protector or oil annually to maintain finish and weather resistance.
Storage: If storing for winter, keep in a dry, covered area. Do not stack heavy items on top.
Inspection: Check screws and joints every few months; tighten if loose.

CAUTION! Do not use abrasive cleaners, steel wool, or pressure washers. Do not soak in water.

Warranty Information

IKEA warrants this product against manufacturing defects for the period specified by local IKEA store policies (typically 1-10 years depending on product range). Warranty does not cover damage from improper assembly, misuse, neglect, or normal wear and tear. Keep your receipt as proof of purchase.

For warranty claims, contact your local IKEA store with receipt and article number.

Troubleshooting

Issue	Possible Cause	Solution
Bench wobbles	Uneven surface or loose screws	Place on level ground; check and tighten all screws.
Wood slats cracking	Over-tightening screws or excessive weight	Do not exceed weight limit; replace damaged slat.
Rust on metal parts	Exposure to moisture without protection	Clean with a dry cloth; apply touch-up paint if needed.
Difficult assembly	Parts misaligned	Disassemble and restart from Step 1, ensuring correct orientation.
Missing parts	Packaging error	Contact IKEA customer service with article number for replacement parts.

Support: For missing parts or further assistance, visit www.ikea.com or contact your local IKEA store.