IKEA NÄMMARÖ 105.103.03 Bar Table instructions manual

The IKEA NÄMMARÖ 105.103.03 is an outdoor bar table made from acacia wood, designed for durability and weather resistance. It features a sturdy frame, a slatted tabletop for drainage, and requires user assembly. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.

1. Parts & Hardware Included 2. Tools Required 3. Safety Instructions 4. Assembly Steps 5. Care & Maintenance 6. Specifications 7. Troubleshooting 8. Warranty & Support

Parts & Hardware Included

Before assembly, verify all parts are present. Contact IKEA if any items are missing.

Part NameQuantityDescription/Image Ref.
Tabletop (Slatted)1Acacia wood, pre-drilled
Table Frame (Legs & Supports)1 setPre-assembled A-frame
Wood Screws12For attaching tabletop to frame
Allen Key1Included tool
Protective Caps4For leg ends (optional)

Tools Required

Only basic tools are needed. The included Allen key is sufficient.

Safety Instructions

WARNING! Read all instructions before assembly. Failure to follow may result in injury or damage.

  1. Assemble on a soft, clean surface to avoid scratching parts.
  2. Use two people for handling the tabletop and frame—parts are heavy.
  3. Keep small children and pets away during assembly.
  4. Do not overtighten screws; this may strip the wood.
  5. Ensure all screws are fully tightened before use.

CAUTION! This is an outdoor product. Do not use indoors near heat sources.

Assembly Steps

Estimated assembly time: 20–30 minutes. Follow steps in order.

  1. Prepare: Unpack all parts and lay them out. Identify each piece using the included diagram.
  2. Attach Frame: If the A-frame is not pre-assembled, connect the leg braces using provided bolts. Tighten with the Allen key.
  3. Position Tabletop: With help, place the tabletop upside down on a soft surface. Position the frame upside down onto the tabletop, aligning the pre-drilled holes.
  4. Secure Tabletop: Insert and hand-tighten all 12 wood screws through the frame into the tabletop. Use the Allen key to fully tighten each screw in a crisscross pattern for even pressure.
  5. Flip & Inspect: Carefully flip the table upright. Check stability and ensure all screws are tight. Attach protective caps to leg ends if desired.

Tip: Do not drag the table across rough surfaces; lift to move.

Care & Maintenance

Acacia wood is durable but requires care to maintain appearance and longevity.

CAUTION! Never use bleach or ammonia-based cleaners.

Specifications

Troubleshooting

IssuePossible CauseSolution
Table wobblesUneven floor; loose screwsCheck screw tightness; adjust leg caps or place on level surface.
Screw won't tightenStripped hole; misalignmentDo not force. Ensure holes are aligned; if stripped, use a slightly larger screw or wood filler.
Wood crackingOvertightening; impactStop assembly. Contact IKEA for replacement part if crack affects stability.
DiscolorationSun/water exposureNormal for outdoor wood. Apply wood protector annually to minimize.
Missing partPackaging errorContact IKEA customer service with article number (105.103.03) for missing parts.

Warranty & Support

IKEA limited warranty applies. See IKEA terms or receipt for details.

Warranty Coverage: Covers material and manufacturing defects under normal use for the specified period (check local warranty terms). Does not cover damage from improper assembly, neglect, or accidents.

Support: For questions, missing parts, or assembly help:

Recycling: Dispose of packaging responsibly. Wood parts can be recycled or repurposed.

IKEA NÄMMARÖ 105.103.03 Bar Table instructions manual © - All Rights Reserved 2025