IKEA NYTTIG 204.997.29 Ventilated Plinth instructions manual

The IKEA NYTTIG 204.997.29 is a ventilated plinth designed for kitchen cabinets, providing airflow to prevent moisture buildup while maintaining a clean appearance. It features a sturdy construction, ventilation slots, easy installation with included hardware, and compatibility with various IKEA kitchen systems. Below are key sections for safety, features, installation, setup, operation, and maintenance.

Features at a Glance

Key components: Ventilated plinth panel, mounting brackets, screws, installation manual.

Installation

Unpack and inspect contents. Ensure cabinet base is clean and level.

1. Position plinth: Place plinth against cabinet base, aligning with edges.
2. Attach brackets: Use screws to secure mounting brackets to cabinet base.
3. Secure plinth: Slide plinth onto brackets and tighten screws.
4. Check alignment: Ensure plinth is level and flush with cabinet front.
5. Ventilation check: Verify slots are unobstructed for proper airflow.

WARNING! Use proper tools; avoid over-tightening screws. Ensure plinth is securely attached to prevent tipping.

First-Time Setup

After installation, verify proper fit and function.

1. Inspect installation: Check that plinth is level and brackets are tight.
2. Test ventilation: Ensure no blockages in slots.
3. Adjust if needed: Trim plinth if required for custom fits (use saw carefully).
4. Clean surface: Wipe with dry cloth to remove dust.

CAUTION! Do not force plinth into place; ensure proper measurements before cutting.

Specifications

• Model: NYTTIG 204.997.29.
• Type: Ventilated plinth for kitchen cabinets.
• Dimensions: Standard size (check packaging for exact measurements).
• Material: Particleboard with foil finish.
• Color: As specified (e.g., white).
• Ventilation: Integrated slots for airflow.
• Hardware: Includes mounting brackets and screws.
• Weight capacity: Designed to support standard cabinet base loads.
• Compatibility: IKEA kitchen systems (refer to IKEA compatibility guide).
• Warranty: Refer to IKEA warranty terms.

Controls and Settings

No electronic controls; manual adjustment only.

Adjustment: Use level to ensure plinth is horizontal; adjust brackets if needed.

Installation: Brackets and screws for mounting. Maintenance: Regular cleaning of slots. Safety: Ensure secure attachment to prevent hazards. Compatibility: Verify with IKEA cabinet dimensions.

Connecting to Cabinets

Mount to cabinet base using included brackets.

1. Turn off power if near electrical outlets.
2. Align plinth with cabinet base.
3. Attach brackets to cabinet with screws.
4. Slide plinth onto brackets and secure.
5. Check for stability and level.

Tip: Use a level during installation to ensure even alignment.

Maintenance

Regularly check for dust or blockages in ventilation slots.

1. Monthly: Inspect brackets and screws for tightness.
2. Clean slots: Use soft brush or vacuum to remove debris.
3. Surface cleaning: Wipe with damp cloth; avoid harsh chemicals.
4. Check for moisture: Ensure area under cabinets remains dry.

WARNING! Do not use abrasive cleaners; avoid excessive water on plinth surface.

Safety Features

Secure mounting prevents tipping; ventilation reduces mold risk.

Care & Cleaning

Unplug nearby appliances before cleaning. Use dry or slightly damp cloth only; no liquids or abrasive pads.

CAUTION! Do not spray liquids directly onto plinth; avoid heat sources.

Regulatory Information

Complies with furniture safety standards. Copyright © IKEA; trademarks of Inter IKEA Systems B.V. For support, visit www.ikea.com or contact local IKEA customer service.

Troubleshooting

Reset: Reinstall if necessary.

Service: Contact IKEA customer service; www.ikea.com