IKEA NYTTIG 094.428.81 Filler Piece instructions manual

The IKEA NYTTIG 094.428.81 Filler Piece is designed to fill gaps in IKEA kitchen cabinet installations, providing a clean, finished look. It is typically used to cover spaces between cabinets and walls or appliances. Below are key sections for safety, features, installation, care, and troubleshooting.

1. Product Overview 2. Included Parts 3. Safety Information 4. Installation Instructions 5. Adjustments & Alignment 6. Care & Maintenance 7. Specifications 8. Troubleshooting 9. Warranty & Support

Product Overview

The NYTTIG filler piece is a versatile component for IKEA kitchen systems, used to create a seamless appearance by covering gaps between cabinets and adjacent surfaces.

Feature	Description
Material	Particleboard with melamine foil finish
Color	White (matches standard IKEA cabinet fronts)
Function	Conceals uneven spaces between cabinets and walls/appliances
Compatibility	Designed for IKEA SEKTION/METOD kitchen systems
Installation	Requires mounting brackets or screws (not always included)

Included Parts

Check package contents before installation.

1x Filler piece (NYTTIG 094.428.81)
Mounting hardware (screws/brackets) may be included depending on region/package
Instruction manual (this document)

Note: Some packages may require separate purchase of mounting brackets.

Safety Information

Follow these safety guidelines during installation.

Use appropriate personal protective equipment (safety glasses, gloves).
Ensure cabinets are securely mounted to wall before attaching filler piece.
Use correct tools (drill, level, screwdriver) to prevent injury.
Keep work area clean and free of obstacles.

WARNING! Filler piece is not structural; do not use as support for cabinets or countertops.

Installation Instructions

Install filler piece after cabinets are securely mounted.

Measure gap between cabinet and wall/appliance to confirm filler piece fits.
If necessary, trim filler piece to required width using fine-tooth saw.
Position filler piece in gap, ensuring it is plumb and flush with cabinet front.
Secure using provided brackets/screws through cabinet side panel into filler piece.
Check alignment; adjust as needed before tightening screws completely.

Tip: Use shims behind filler piece if wall is uneven for better fit.

Adjustments & Alignment

Proper alignment ensures professional appearance.

Vertical alignment: Use level to ensure filler piece is plumb.
Front alignment: Should be flush with cabinet door/drawer fronts.
Gap adjustment: Loosen screws slightly to reposition, then retighten.
Trimming: Only trim width if necessary; do not alter height or thickness.

Care & Maintenance

Clean with damp cloth and mild detergent; avoid abrasive cleaners.

CAUTION! Do not use harsh chemicals, solvents, or scouring pads that may damage melamine surface.

Specifications

Article Number: 094.428.81
Dimensions: Varies by package; typical height matches cabinet (up to 90" / 229 cm)
Thickness: Standard cabinet depth (approx. 15" / 38 cm)
Weight: Lightweight particleboard construction
Finish: White melamine foil, scratch-resistant
Environmental: Complies with IKEA sustainability standards

Troubleshooting

Symptom	Possible Cause	Corrective Action
Filler piece doesn't fit gap	Incorrect measurement or wall unevenness	Re-measure gap; trim filler piece if too wide; use shims if too narrow.
Filler piece not flush with cabinet	Improper mounting or cabinet not level	Check cabinet level; loosen screws, align filler piece, retighten.
Visible gaps after installation	Wall not straight or piece not plumb	Use caulk to fill small gaps; ensure piece is installed plumb.
Hardware missing	Package incomplete	Contact IKEA customer service for replacement parts.
Surface damage	During handling or installation	Handle with care; minor scratches can be touched up with matching paint.

Warranty & Support

IKEA provides limited warranty; see IKEA terms and conditions. For support, visit www.ikea.com or contact local IKEA store.

Service: IKEA customer service: 1-888-888-4532