IKEA NYTTIG 093.946.15 Filler Piece instructions manual

The IKEA NYTTIG 093.946.15 Filler Piece is a component designed to fill gaps in IKEA kitchen systems, ensuring a seamless and finished appearance. It is typically used with SEKTION or METOD cabinet frames to cover spaces between cabinets, walls, or appliances. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing DVD Media 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Filler piece panel, mounting brackets (if included), screws.

FeatureDescription
MaterialTypically particleboard with melamine foil or wood veneer finish
Color/FinishMatches IKEA cabinet ranges (e.g., white, black-brown, oak)
DimensionsVaries by model; check packaging for exact width/height/depth
MountingDesigned for attachment to cabinet frame or wall
UsageFills gaps between cabinets and walls/ceilings/appliances
CompatibilitySEKTION, METOD, or other IKEA kitchen systems
AdjustabilityMay be trimmed to fit specific gap widths
Included HardwareScrews, brackets, or clips as specified
WeightLightweight for easy handling
DesignFlat panel with finished edges

Installation

Unpack and inspect contents. Ensure cabinet frame is securely installed.

  1. Measure gap: Determine exact width/height needed for filler piece.
  2. Trim if necessary: Use saw to cut filler piece to required size (if adjustable model).
  3. Position filler: Place against cabinet frame or wall in desired location.
  4. Attach with screws: Use provided screws to secure filler piece to cabinet frame.
  5. Check alignment: Ensure filler is flush with cabinet fronts and level.

WARNING! Use proper safety equipment when cutting. Ensure filler is securely fastened to prevent tipping or instability.

First-Time Setup

Prepare tools: Phillips screwdriver, measuring tape, level, saw (if trimming needed).

  1. Identify location: Determine where filler piece is needed (e.g., between cabinet and wall).
  2. Verify measurements: Double-check gap dimensions before cutting or installing.
  3. Test fit: Place filler piece without fastening to ensure proper fit.
  4. Secure permanently: Attach with screws, ensuring tight but not over-tightened.
  5. Final inspection: Confirm filler is stable and visually aligned.

CAUTION! Do not overload or use filler piece as structural support. Keep away from excessive moisture.

Specifications

Controls and Settings

No electronic controls; installation adjustments only.

Adjustment Options: Trimming for width/height, positioning for alignment.

Installation: Use level for horizontal/vertical alignment. Fastening: Screw tightness (firm but not stripping). Compatibility: Ensure filler matches cabinet depth and finish.

Connecting Devices

Not applicable; no electronic connections.

  1. Ensure cabinet frame is properly installed and level.
  2. Filler piece attaches mechanically only.
  3. No cables, wires, or ports required.

Tip: For integrated lighting or wiring, plan cuts/channels before installation.

Playing DVD Media

Not applicable; this is a non-electronic filler piece.

  1. This product does not play media.
  2. Refer to IKEA appliance manuals for multimedia devices.

WARNING! Do not attempt to insert discs or use as shelf.

Accessibility Features

Not applicable; no electronic accessibility features.

Care & Cleaning

Use damp cloth with mild detergent; avoid abrasive cleaners.

CAUTION! Do not soak or use harsh chemicals; may damage finish.

Regulatory Information

Complies with furniture safety standards. Copyright © IKEA. For support, visit www.ikea.com or contact local IKEA customer service.

Troubleshooting

SymptomPossible CauseCorrective Action
Filler does not fitIncorrect measurementsRe-measure gap; trim filler piece if designed for cutting.
Filler not alignedCabinet not levelAdjust cabinet position; use shims if necessary.
Screws not holdingWrong screw type/over-tighteningUse provided screws; avoid stripping; ensure into solid frame.
Finish damagedImproper cutting/cleaningCut slowly with fine-tooth saw; clean gently with soft cloth.
Gap visible after installFiller too small/misplacedUse larger filler or adjust position; ensure tight against cabinet.

Reset: Remove and reinstall if necessary.

Service: Contact IKEA customer service for replacement parts or advice.

IKEA NYTTIG 093.946.15 Filler Piece instructions manual © - All Rights Reserved 2025