IKEA NYSJÖN 094.158.73 Mirror Cabinet instructions manual

The IKEA NYSJÖN 094.158.73 is a wall-mounted mirror cabinet with integrated storage, designed for bathrooms. It features a mirrored door, adjustable interior shelves, soft-closing hinges, and a water-resistant construction. Below are key sections for safety, assembly, installation, use, care, and troubleshooting.

1. Parts & Tools Checklist 2. Safety Information 3. Assembly Instructions 4. Wall Mounting 5. Adjusting Shelves & Door 6. Specifications 7. Care & Maintenance 8. Troubleshooting 9. Warranty & Support

Parts & Tools Checklist

Before assembly, verify all parts are included. Key components: Mirror cabinet frame, mirrored door, shelves, mounting brackets, screws, wall anchors, soft-closing hinges, shelf supports.

Part NumberDescriptionQuantity
100001Cabinet frame1
100002Mirrored door1
100003Adjustable shelf2
100004Mounting bracket2
100005Screw set1 pack
100006Wall anchor set1 pack
100007Soft-closing hinge2
100008Shelf support pin8

Tools needed: Phillips screwdriver, drill, level, pencil, measuring tape.

Safety Information

Read all instructions before assembly and installation.

  1. Weight limit: Do not exceed 15 kg total load inside cabinet.
  2. Wall suitability: Mount only on solid walls (concrete, brick, or studs). Do not mount on plasterboard alone without proper anchors.
  3. Child safety: Keep small parts away from children during assembly.
  4. Electrical safety: Ensure no electrical wires or pipes are behind mounting area.

WARNING! Cabinet is heavy; use two people for handling and mounting to prevent injury or damage.

Assembly Instructions

Assemble on a soft, flat surface to avoid scratches.

  1. Attach hinges: Fix soft-closing hinges to the cabinet frame using provided screws.
  2. Install shelf supports: Insert shelf support pins into pre-drilled holes at desired heights.
  3. Place shelves: Rest shelves on support pins.
  4. Attach door: Align door with hinges and secure. Adjust door alignment if needed.

Tip: Do not overtighten screws to avoid damaging the material.

Wall Mounting

Mounting height recommended: 150-160 cm from floor to cabinet bottom.

  1. Locate studs: Use a stud finder to locate solid mounting points.
  2. Mark positions: Hold mounting bracket against wall, use level to ensure it is horizontal, and mark screw holes.
  3. Drill holes: Drill holes at marked points, insert wall anchors if not mounting into studs.
  4. Secure brackets: Attach mounting brackets to wall with screws.
  5. Hang cabinet: Lift cabinet onto brackets, ensuring it clicks securely into place.
  6. Final check: Test stability and ensure door opens and closes smoothly.

CAUTION! Ensure cabinet is level and securely fastened to prevent falling.

Adjusting Shelves & Door

Shelves are adjustable; door can be aligned for smooth operation.

Shelves: Remove shelf, reposition support pins in other pre-drilled holes, replace shelf.

Door alignment: Use a screwdriver to adjust hinges:

  1. Vertical adjustment: Turn screw on hinge to raise or lower door.
  2. Horizontal adjustment: Turn screw to move door left or right.
  3. Depth adjustment: Turn screw to adjust door tightness against frame.

Soft-close feature: Hinge automatically slows door before closing. Do not force door.

Specifications

Care & Maintenance

Clean with a soft, damp cloth. Do not use abrasive cleaners, solvents, or ammonia-based products on mirror or surfaces.

  1. Mirror: Wipe with glass cleaner and soft cloth. Dry immediately.
  2. Frame and interior: Use mild soap solution, then dry.
  3. Hinges: Keep clean and dry. Do not lubricate.

CAUTION! Avoid excessive moisture inside cabinet. Ensure bathroom is well-ventilated.

Troubleshooting

SymptomPossible CauseCorrective Action
Cabinet not levelWall uneven or brackets not levelRemount brackets using level; use shims if necessary.
Door does not close smoothlyHinges misaligned or obstructedAdjust hinges as per instructions; check for obstructions.
Shelves wobbleSupport pins not fully insertedEnsure pins are pushed completely into holes.
Cabinet feels looseInsufficient wall anchorageReinforce with appropriate wall anchors or mount into studs.
Mirror appears cloudyMoisture buildup or improper cleaningImprove ventilation; clean with proper glass cleaner.

Warranty & Support

IKEA limited warranty applies. For missing parts or assembly support, contact IKEA customer service.

Contact: Visit www.ikea.com or call 1-800-434-4532. Have model number (094.158.73) ready.

Recycling: Dispose of packaging and product according to local regulations.

IKEA NYSJÖN 094.158.73 Mirror Cabinet instructions manual © - All Rights Reserved 2025