IKEA NYSJÖN 194.196.82 Mirror instructions manual

The IKEA NYSJÖN 194.196.82 is a wall-mounted mirror designed for bathroom or hallway use. It features a rectangular shape with a clean, minimalist frame, safety backing, and wall mounting hardware included. Below are key sections for safety, features, installation, care, and warranty information.

1. Product Overview & Features 2. Safety Instructions 3. Included Parts & Tools Needed 4. Step-by-Step Installation 5. Mounting & Leveling 6. Care & Cleaning 7. Specifications 8. Troubleshooting 9. Warranty & Support

Product Overview & Features

Key components: Mirror glass, frame, wall mounting brackets, screws, wall plugs, and assembly instructions.

FeatureDescription
Frame MaterialPowder-coated steel/ aluminum (varies by model)
Mirror TypeClear float glass with protective backing
Mounting TypeWall-mounted (fixed position)
Safety BackingProtective film to prevent shattering
DesignRectangular shape, minimalist frame
Intended UseIndoor use only (bathroom, hallway, bedroom)

Safety Instructions

Read all instructions before assembly and installation.

  1. Use only for intended purpose (wall-mounted mirror).
  2. Ensure wall is solid and can support mirror weight.
  3. Keep away from direct heat sources and excessive moisture.
  4. Do not hang over bathtub unless specifically rated for it.
  5. Keep out of reach of children during assembly.

WARNING! Mirror is heavy; use two people for handling and mounting. Use appropriate safety gear when drilling.

Included Parts & Tools Needed

Check that all parts are included before starting.

Tip: Lay out all parts on a soft surface to prevent scratches.

Step-by-Step Installation

Follow these steps for safe and secure installation.

  1. Prepare Wall: Choose location, use stud finder to locate studs if possible.
  2. Mark Bracket Positions: Hold brackets against wall, use level to ensure they are even, mark screw holes with pencil.
  3. Drill Holes: Drill holes at marked points, insert wall plugs if not drilling into studs.
  4. Attach Brackets: Secure brackets to wall using provided screws.
  5. Hang Mirror: With help, lift mirror and hook onto brackets securely.
  6. Final Check: Ensure mirror is level and firmly attached; gently test stability.

CAUTION! Do not overtighten screws; this may damage wall or frame.

Mounting & Leveling

Proper leveling is crucial for appearance and safety.

Note: Mirror is designed for vertical orientation only.

Care & Cleaning

To maintain appearance and longevity.

  1. Use soft, lint-free cloth (microfiber recommended).
  2. For cleaning, use mild glass cleaner or mixture of vinegar and water.
  3. Spray cleaner onto cloth, not directly onto mirror.
  4. Gently wipe in circular motions; dry with clean cloth.
  5. Avoid abrasive cleaners, scouring pads, or ammonia-based products.

CAUTION! Do not use excessive water or allow liquid to seep behind frame.

Specifications

Troubleshooting

IssuePossible CauseSolution
Mirror not levelBrackets unevenLoosen brackets, re-level, tighten carefully.
Mirror feels looseBrackets not secureCheck screw tightness; ensure wall plugs are used if needed.
Frame scratches during assemblyRough handlingAssemble on soft surface; handle with care.
Glass appears blurry or streakedIncorrect cleaning productUse recommended cleaner and soft cloth.
Brackets don't align with wall studsIncorrect measurementRemount using appropriate wall anchors for plasterboard.

Note: If mirror is damaged or parts missing, contact IKEA customer service.

Warranty & Support

IKEA limited warranty applies. For assistance:

Warning: Modifications void warranty. Use only IKEA-approved parts.

IKEA NYSJÖN 194.196.82 Mirror instructions manual © - All Rights Reserved 2025