IKEA NYMÅNE 005.040.48 Lighting instructions manual

The IKEA NYMÅNE 005.040.48 is a ceiling lamp designed for indoor use, featuring a minimalist design with a white opal glass shade and a black metal base. It is suitable for general room lighting and requires assembly and installation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Bulb Replacement 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: White opal glass shade, Black metal base/canopy, Mounting hardware, Cable with plug, Instruction manual.

Feature	Description
Shade Material	White opal glass for diffused light
Base Material	Black painted metal
Mounting Type	Ceiling mounted, fixed
Included Bulb	E27 LED bulb (energy class A++)
Dimmable	No (compatible with non-dimmable switches only)
Cable Length	1.5 meters (approx. 59 inches)
Plug Type	Type A (North America) / Type F (Europe) depending on region
Weight	1.8 kg (approx. 4 lbs)
IP Rating	IP20 (for indoor dry locations only)
Assembly Required	Yes (tools not included)

Installation

Unpack and inspect all parts. Ensure power is switched OFF at the circuit breaker before beginning.

Assemble the lamp: Attach the glass shade to the metal base using the provided screws.
Mount the base: Secure the mounting plate to the ceiling junction box using appropriate screws (not included for concrete ceilings).
Connect wires: Match wire colors (black to black/live, white to white/neutral, green/yellow to ground). Use wire connectors provided.
Attach canopy: Secure the canopy cover over the mounting plate to conceal wiring.
Install bulb: Screw the included E27 LED bulb into the socket.

WARNING! Installation should be performed by a qualified electrician if you are unsure. Ensure the ceiling can support the lamp's weight.

First-Time Setup

After installation, restore power and test the lamp.

Switch on power: Turn on the circuit breaker.
Operate lamp: Use the wall switch to turn the light on/off.
Check light output: Ensure the bulb illuminates properly and the shade is securely attached.
Adjust positioning: Ensure the lamp hangs straight and is firmly fixed to the ceiling.

CAUTION! Do not touch the bulb when it is on or immediately after turning off, as it may be hot. Allow to cool before handling.

Specifications

Product Name: NYMÅNE
Article Number: 005.040.48
Light Source: 1 x E27 socket (bulb included)
Included Bulb: 10W LED, 806 lumens, 2700K (warm white), energy class A++
Max Wattage: 15W LED or 40W incandescent (not recommended)
Voltage: 120-240V AC, 50/60Hz
Dimensions: Diameter 30 cm, Height 18 cm (approx. 11.8" x 7.1")
Material: Glass shade, Metal base, Plastic cable
Color: White opal glass / Black metal
Lifetime: LED bulb rated for 15,000 hours

Controls and Settings

This lamp is controlled solely by the wall switch it is connected to. No remote control or dimmer is included or supported.

Operation: ON/OFF via wall switch.

Note: Using a dimmer switch may cause flickering or damage to the LED bulb, as it is non-dimmable. Ensure your wall switch is a standard on/off type.

Connecting to Power

The lamp must be connected to a standard household electrical circuit via a ceiling junction box.

Turn off power at the main circuit breaker.
Identify wires in junction box: Live (black/brown), Neutral (white/blue), Ground (green/yellow).
Connect lamp wires: Match colors using wire connectors (live to live, neutral to neutral, ground to ground).
Secure connections and tuck wires neatly into the junction box.
Mount the lamp base as described in Installation.

Tip: Use a voltage tester to confirm power is off before touching any wires.

Bulb Replacement

Replace the bulb only when the lamp is switched OFF and has cooled down.

Allow bulb to cool: Wait at least 5 minutes after turning off.
Remove glass shade: Carefully unscrew or unclip the shade (refer to assembly instructions).
Replace bulb: Unscrew the old E27 bulb and screw in a new one of the same type (max 15W LED or 40W incandescent).
Reattach shade: Secure the glass shade back onto the base.
Test: Turn on the power to check the new bulb.

WARNING! Do not exceed the maximum wattage. Using a higher wattage bulb may cause overheating and fire hazard. We recommend using LED bulbs for energy efficiency.

Safety Features

Overheat Protection: Built-in design prevents excessive heat buildup when using correct bulb wattage. Insulation: Wires are insulated according to safety standards. IP20 Rating: Protects against solid objects larger than 12.5mm; not protected against water. For indoor use only.

Care & Cleaning

Switch off and unplug (if applicable) or turn off power at the circuit breaker before cleaning.

Glass shade: Wipe with a soft, dry or slightly damp cloth. Do not use abrasive cleaners.
Metal base: Dust with a soft cloth. For stubborn marks, use a mild soap solution and dry immediately.
Cable: Wipe with a dry cloth.

CAUTION! Do not immerse any part of the lamp in water or other liquids. Do not use chemical or abrasive cleaners on the glass or metal surfaces.

Regulatory Information

Complies with relevant safety standards (e.g., UL/cUL in North America, CE in Europe). This product meets efficiency requirements per regional regulations. The LED bulb contains no mercury. For end-of-life disposal, follow local regulations for electronic waste. Copyright © IKEA of Sweden AB. For support, visit www.ikea.com or contact your local IKEA store.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Power/Bulb	Check circuit breaker; ensure wall switch is on; replace bulb.
Flickering light	Loose connection/Bulb type	Check wire connections in junction box; ensure a non-dimmable LED bulb is used.
Overheating	Bulb wattage too high	Replace with a bulb of correct wattage (max 15W LED).
Shade loose or rattling	Not properly secured	Turn off power, check and tighten screws/clips holding the shade.
Buzzing sound	Faulty ballast (if applicable) or dimmer	Ensure no dimmer is used; if problem persists, contact support.

Note: If the lamp is damaged (cracked glass, exposed wires), discontinue use immediately and contact IKEA for advice.

Service: www.ikea.com or your local IKEA customer service.