IKEA NYMÅNE 803.569.87 Wall Lamp instructions manual

The IKEA NYMÅNE 803.569.87 is a modern wall lamp designed for indoor use, featuring a clean, minimalist design with a white plastic shade and a metal base. It provides diffused, glare-free lighting suitable for hallways, bedrooms, or living areas. This manual covers safety instructions, parts identification, step-by-step assembly, installation, operation, maintenance, and troubleshooting. Always follow the safety guidelines to ensure proper and safe use.

1. Safety Instructions 2. Parts & Tools Included 3. Assembly Instructions 4. Installation on Wall 5. Specifications 6. Operation & Use 7. Care & Cleaning 8. Troubleshooting 9. Warranty & Support

Safety Instructions

Read all instructions before assembly and installation. Failure to follow safety guidelines may result in electric shock, fire, or injury.

Warning	Description
Electrical Safety	Ensure power is switched OFF at the circuit breaker before installation. Do not install near water or in damp locations.
Lamp Bulb	Use only E14 max 28W LED bulb or equivalent energy-saving bulb as specified. Do not exceed wattage rating.
Mounting Surface	Install only on a vertical wall capable of supporting the lamp's weight. Use appropriate wall anchors if not mounting into a stud.
Children & Pets	Keep out of reach of young children. The lamp may become warm during use.
Inspection	Periodically check for loose screws, damaged wires, or cracks in the shade. Discontinue use if damaged.

Parts & Tools Included

Unpack all contents and verify you have the following parts. Contact IKEA if any item is missing.

Lamp Shade: White plastic diffuser (1 piece).
Lamp Base: Metal wall plate with integrated socket (1 piece).
Mounting Bracket: Metal bracket with screw holes (1 piece).
Screws & Wall Plugs: For mounting on drywall or solid wall (set of 2).
Assembly Screws: For attaching shade to base (small, 2 pieces).
Instruction Manual: This document.

Tools Needed (Not Included): Phillips screwdriver, drill (if mounting on masonry), pencil, level, wire strippers/connectors (if wiring to house circuit).

Assembly Instructions

Assemble the lamp before mounting it on the wall. Work on a clean, flat surface.

Insert Bulb: Screw an E14 LED bulb (max 28W) into the socket on the lamp base. Do not switch on yet.
Attach Shade: Align the plastic shade with the base. Secure it using the two small assembly screws provided. Do not overtighten.
Check Stability: Ensure the shade is firmly attached and does not wobble.

CAUTION! Do not force parts. If something doesn't fit, check orientation. Bulb must be cool before handling.

Installation on Wall

This lamp is designed for permanent wall mounting. If unsure about electrical work, consult a qualified electrician.

Turn Off Power: Switch off electricity at the circuit breaker for the room where you will install the lamp.
Mark Position: Hold the mounting bracket against the wall at desired height. Use a level to ensure it is straight. Mark screw holes with a pencil.
Drill Holes: Drill holes at marked points. Insert wall plugs if mounting on drywall or masonry.
Secure Bracket: Attach the mounting bracket to the wall using the provided screws. Ensure it is firmly fixed.
Connect Wires: If hardwiring, connect the lamp's wires (typically brown/live, blue/neutral, green-yellow/ground) to your household wiring using appropriate connectors. Follow local electrical codes.
Attach Lamp: Place the assembled lamp onto the mounted bracket. It may click or lock into place. Secure with any additional screws if required.
Restore Power: Turn the electricity back on at the circuit breaker.

WARNING! Electrical connections must be secure and insulated. Exposed wires can cause shock or fire.

Specifications

Model: NYMÅNE 803.569.87
Type: Wall-mounted lamp
Material: Shade: Plastic; Base/Bracket: Metal
Color: White
Bulb: 1 x E14 socket, Max 28W LED or equivalent
Dimensions (approx.): Height: 18 cm, Width: 15 cm, Projection from wall: 12 cm
Weight: 0.5 kg (without bulb)
Voltage: 220-240V ~ 50/60Hz (or as per regional variant)
IP Rating: IP20 - For indoor use only
Certifications: CE marked, complies with EU safety standards

Operation & Use

Once installed, operation is simple via your wall switch or integrated switch (if model includes one).

Switching On/Off: Use the wall switch connected to the lamp's circuit.
Light Adjustment: This model does not have a dimmer. For dimming, use only dimmable LED bulbs compatible with your wall dimmer switch.
Recommended Use: Ideal for ambient lighting. Avoid using in enclosed fixtures or covering the shade, as this may cause overheating.

Tip: For optimal light distribution and longevity, use a quality LED bulb.

Care & Cleaning

Regular cleaning maintains appearance and light output.

Turn Off & Cool: Always switch off the lamp and let the bulb cool completely before cleaning.
Cleaning Shade: Wipe the plastic shade with a soft, dry or slightly damp cloth. Do not use abrasive cleaners, solvents, or chemicals.
Cleaning Base: Dust the metal base with a dry cloth.
Bulb Replacement: When replacing the bulb, ensure the lamp is off and cool. Unscrew the old bulb and screw in a new E14 LED bulb (max 28W).

CAUTION! Never immerse the lamp in water or other liquids. Do not clean with the power on.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Power off; faulty bulb; loose connection	Check circuit breaker/wall switch. Replace bulb. Ensure all wires are securely connected.
Lamp flickers	Loose bulb; incompatible bulb; faulty wiring	Tighten bulb. Use a recommended LED bulb. Check electrical connections.
Lamp is loose on wall	Loose screws; improper mounting	Tighten all mounting screws. Ensure bracket is fixed to a solid part of the wall.
Overheating	Bulb wattage too high; covered vent	Use only max 28W bulb. Ensure lamp has space around it for air circulation.
Plastic shade discolored	Heat from high-wattage bulb; sunlight exposure	Replace with correct low-heat LED bulb. Consider relocating if in direct sunlight.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA guarantee leaflet included with your purchase for full terms and duration.

Recycling: Dispose of the lamp and bulb according to local electronic waste (WEEE) regulations. Do not dispose of with household trash.

Contact IKEA: For missing parts, further instructions, or warranty service, visit the IKEA website or contact your local IKEA store.

Website: www.ikea.com

Safety Standards: Conforms to applicable EU directives and standards.