IKEA NYMÅNE 504.770.52 Floor Lamp instructions manual

The IKEA NYMÅNE 504.770.52 is a modern floor lamp featuring a sleek metal frame, adjustable height, and a fabric shade for diffused lighting. Designed for easy assembly with included tools, it operates with a maximum 13W LED bulb (E27 base, not included) and includes a foot switch for convenient on/off control. Below are key sections for safety, parts list, assembly instructions, usage, care, and troubleshooting.

1. Parts & Tools Included 2. Safety Instructions 3. Assembly Steps 4. Specifications 5. Installation & Placement 6. Operation 7. Bulb Replacement 8. Care & Maintenance 9. Warranty Information 10. Troubleshooting

Parts & Tools Included

Before assembly, verify all parts are present. Key components: Metal base, adjustable stem sections, fabric shade, lamp holder with cord, foot switch, screws, and Allen key.

Part Name	Quantity	Description
Base plate	1	Weighted metal base for stability
Lower stem section	1	Main vertical tube with adjustment holes
Upper stem section	1	Top tube connecting to shade
Fabric shade	1	White/black fabric diffuser
Lamp holder unit	1	E27 socket with integrated cord
Foot switch	1	On/off switch integrated into cord
Assembly screws	4	For securing stem sections
Allen key	1	Tool for tightening screws
Instruction manual	1	This guide

Safety Instructions

Read all instructions before assembly and use.

Use only LED bulb max 13W, E27 base. Do not exceed wattage.
Ensure lamp is on a stable, level surface to prevent tipping.
Keep away from water, humidity, and heat sources.
Unplug before assembly, cleaning, or bulb replacement.
Do not modify cord or use damaged parts.
This lamp is for indoor use only.

WARNING! Risk of electric shock or fire if used improperly. Do not use with dimmer unless specified compatible.

Assembly Steps

Estimated assembly time: 15-20 minutes. Work on a soft surface to avoid scratches.

Attach base to lower stem: Insert lower stem into base plate hole. Secure with provided screw using Allen key.
Connect upper stem: Slide upper stem onto lower stem. Align holes and insert screw; tighten partially (allow adjustment).
Adjust height: Choose desired height (adjustable range 120-150cm). Align holes on both stems and insert second screw; tighten both screws firmly.
Install lamp holder: Thread cord through stem center. Attach lamp holder to top of upper stem; secure with small screw.
Attach shade: Place fabric shade over lamp holder. Ensure it sits securely on the holder rim.
Final check: Ensure all screws are tight. Plug cord into outlet.

CAUTION! Do not overtighten screws. Ensure cord is not pinched during assembly.

Specifications

Model: NYMÅNE 504.770.52
Type: Adjustable height floor lamp
Material: Steel base and stem, fabric shade
Color: Black/White (as per variant)
Height: Adjustable 120-150 cm (47-59 inches)
Base Diameter: 25 cm (9.8 inches)
Shade Dimensions: 30 cm height x 25 cm diameter (11.8 x 9.8 inches)
Bulb: 1 x max 13W LED, E27 base (not included)
Switch: Foot switch on cord
Cord Length: 180 cm (71 inches)
Voltage: 120V AC, 60Hz (for North America)
Weight: 3.2 kg (7 lbs) assembled

Installation & Placement

Choose location carefully for optimal function and safety.

Place on flat, stable floor away from walkways.
Ensure at least 30 cm clearance from walls/curtains.
Position near power outlet; avoid stretching cord.
Adjust height as needed by loosening stem screws.

Tip: Ideal for reading corners, beside sofas, or as ambient room lighting.

Operation

Insert compatible LED bulb (max 13W, E27 base).

Plug cord into wall outlet.
Press foot switch to turn lamp on/off.
Adjust lamp height if needed (unplug before adjusting).

Note: Lamp may warm slightly during use; this is normal. If excessive heat, turn off and check bulb wattage.

Bulb Replacement

Always unplug lamp before replacing bulb.

Allow bulb to cool if recently used.
Remove shade by lifting gently off holder.
Unscrew old bulb counterclockwise.
Screw new LED bulb (max 13W, E27) clockwise until snug.
Replace shade, ensuring it sits evenly.
Plug in and test with foot switch.

WARNING! Use only specified bulb type. Do not touch new bulb with bare hands; use cloth.

Care & Maintenance

Unplug before cleaning.

Metal parts: Wipe with dry or slightly damp cloth. Do not use abrasive cleaners.
Fabric shade: Use soft brush or vacuum with brush attachment. For stains, spot clean with mild soap and damp cloth; air dry completely.
Cord: Check periodically for damage. Do not pull cord to unplug.

CAUTION! Never immerse lamp in water. Do not use solvents on shade.

Warranty Information

IKEA limited warranty applies. See IKEA warranty terms for details. Keep receipt as proof of purchase. For service, contact IKEA customer support at 1-888-888-4532 or visit www.ikea.com.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	No power/bulb issue	Check outlet; ensure bulb is properly screwed in; try different bulb.
Lamp flickers	Loose bulb or incompatible bulb	Tighten bulb; ensure it is max 13W LED E27.
Lamp wobbles	Uneven floor/loose screws	Place on level surface; tighten all assembly screws.
Shade not secure	Not properly seated	Remove and reposition shade evenly on holder.
Foot switch not working	Switch defect/cord issue	Check cord for damage; contact IKEA support if switch faulty.
Overheating	Bulb wattage too high	Use only max 13W LED bulb; ensure ventilation around shade.

Recycling: Dispose of according to local electronic waste regulations.

Support: 1-888-888-4532; www.ikea.com