IKEA NYMÅNE 204.777.51 Work Lamp instructions manual

The IKEA NYMÅNE 204.777.51 is an adjustable work lamp designed for focused lighting on desks, workbenches, or reading areas. It features a flexible gooseneck arm, an energy-efficient LED light source, a stable weighted base, an on/off switch, and a modern, minimalist design. Below are key sections for safety, assembly, features, operation, care, and troubleshooting.

1. Features at a Glance 2. Assembly Instructions 3. First-Time Setup 4. Specifications 5. Controls and Operation 6. Positioning and Adjustment 7. Replacing the Light Source 8. Safety Information 9. Care & Cleaning 10. Warranty & Support 11. Troubleshooting

Features at a Glance

Key components: LED light unit, Flexible gooseneck arm, Weighted metal base, On/Off switch, Power cord with plug.

Feature	Description
LED Light Source	Energy-efficient, long-lasting integrated LED module
Gooseneck Arm	Fully adjustable for precise light direction
Weighted Base	Provides stability and prevents tipping
On/Off Switch	Conveniently located on the base or cord
Power Supply	Standard mains plug for your region
Modern Design	Clean lines in black or white finish
Flexible Positioning	Arm can be bent to hold its shape
Focused Light Beam	Ideal for tasks requiring concentrated light

Assembly Instructions

Unpack all parts and check contents against the parts list. Ensure you have a clean, flat surface for assembly.

Attach the Base: If the base is separate, screw it firmly onto the bottom of the lamp stem.
Connect the Gooseneck: Insert the threaded end of the gooseneck arm into the socket on the base and tighten by hand.
Attach the Lamp Head: Screw the lamp head (LED unit) onto the top of the gooseneck arm.
Route the Cable: Ensure the power cord is not pinched and runs freely from the base.

WARNING! Do not plug in the lamp during assembly. Ensure all connections are hand-tightened securely.

First-Time Setup

Place the lamp on your desired work surface and connect to power.

Choose Location: Place the lamp on a stable, level surface near a power outlet.
Plug In: Connect the power plug to a standard wall outlet.
Power On: Press the On/Off switch. The LED should illuminate.
Adjust Light: Gently bend the gooseneck arm to direct the light where needed.

CAUTION! Keep the lamp away from water, heat sources, and flammable materials.

Specifications

Model: NYMÅNE 204.777.51
Light Source: Integrated non-replaceable LED.
Color Temperature: Warm white (2700K) or Cool white (4000K) - model dependent.
Luminous Flux: Approximately 300 lumens.
Power Consumption: 4W.
Input Voltage: 100-240V AC, 50/60Hz.
Arm Length: Approximately 40 cm (flexible).
Base Diameter: Approximately 15 cm.
Materials: Metal base and arm, plastic details.

Controls and Operation

The lamp is operated via a single On/Off switch.

Switch Location: Typically on the power cord or integrated into the base.

Operation: Press once to turn the lamp ON. Press again to turn it OFF.

Adjustment: The light direction is controlled solely by manually bending the flexible gooseneck arm. There are no brightness or color controls.

Positioning and Adjustment

To achieve optimal lighting for your task:

Place the lamp base within 50 cm of your work area.
Gently grasp the gooseneck arm and bend it to position the lamp head.
Direct the light beam onto your book, keyboard, or workpiece.
The arm will hold its position once released.

Tip: Avoid bending the arm at extreme angles repeatedly, as this may reduce its long-term flexibility.

Replacing the Light Source

Important: The NYMÅNE lamp uses an integrated LED module that is not designed to be replaced by the user. If the light fails, the entire lamp unit must be replaced.

Expected Lifetime: The LED has an estimated lifespan of 25,000 hours under normal use.

Safety Information

Read all safety instructions before use.

This lamp is for indoor use only.
Do not use in bathrooms or other humid locations.
Do not cover the lamp or place objects on it.
Do not look directly into the LED light source.
Disconnect from power before cleaning.
This product contains no user-serviceable parts. Do not attempt to disassemble.
Keep out of reach of young children.

Care & Cleaning

Unplug the lamp and allow it to cool before cleaning.

Wipe the exterior surfaces with a soft, dry or slightly damp cloth.
Do not use abrasive cleaners, solvents, or chemicals.
Ensure no moisture enters any openings.

CAUTION! Never immerse the lamp in water or other liquids.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms included with your purchase or available at IKEA stores and www.IKEA.com.

For product support, assembly questions, or spare parts:
Visit: www.IKEA.com
Contact your local IKEA store.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	No power / Faulty switch	Check if the power outlet works. Ensure the plug is fully inserted. Try the switch again.
Light is dim or flickering	Power supply issue / End of life	Try a different power outlet. If problem persists, the LED module may be failing.
Gooseneck arm is too loose	Normal wear over time	Gently adjust the arm. It is designed to be flexible but may loosen slightly with extensive use.
Lamp is unstable	Base not attached / Uneven surface	Ensure the base is securely attached. Place the lamp on a flat, level surface.
Lamp gets warm	Normal operation	The base and arm may become warm during prolonged use. This is normal. Ensure vents are not blocked.

Disposal: Dispose of this product according to local electronic waste (WEEE) regulations. Do not dispose of with household waste.