IKEA NYFORS 603.031.22 Table Lamp instructions manual

The IKEA NYFORS 603.031.22 is a modern table lamp featuring a sleek metal shade, adjustable head for directional lighting, on/off switch on the cord, and uses a maximum E26/E27 7W LED bulb (not included). Designed for home office, bedside, or living room use. Below are key sections for safety, assembly, operation, care, and troubleshooting.

Features at a Glance

Key components: Metal shade, adjustable lamp head, weighted base, on/off switch on cord, E26/E27 socket.

Assembly Instructions

Unpack all parts and check contents. Assembly requires no tools.

1. Place the weighted base on a flat, stable surface.
2. Insert the stem into the base socket and twist clockwise until secure.
3. Attach the lamp head to the top of the stem by aligning and tightening the joint.
4. Ensure all connections are firm but do not overtighten.

WARNING! Do not assemble near water. Ensure lamp is unplugged during assembly.

First-Time Setup

After assembly, prepare lamp for use.

1. Install bulb: Use only E26/E27 base LED bulb, max 7W. Screw in clockwise until snug.
2. Plug cord into standard 120V AC outlet.
3. Test operation: Press switch on cord to turn on/off.
4. Adjust head to desired angle for optimal lighting.

CAUTION! Use only recommended bulb type and wattage to prevent overheating.

Specifications

• Product Name: NYFORS Table Lamp.
• Article Number: 603.031.22.
• Bulb Type: E26/E27 base LED, max 7W (not included).
• Power Supply: 120V AC, 60Hz.
• Cord Length: 1.8 meters (approx. 6 feet).
• Dimensions: Height: 40 cm, Base diameter: 15 cm.
• Weight: 1.2 kg.
• Material: Metal with powder-coated finish.
• Color: Black.
• Intended Use: Indoor residential use on stable surfaces.

Controls and Operation

Simple on/off operation with cord switch.

Switch: Rocker switch on power cord for turning lamp on and off.

Adjustment: Lamp head can be tilted up/down to direct light where needed. Grip the head firmly and adjust to desired angle.

Note: This lamp does not feature dimming capability unless used with a dimmable LED bulb and external dimmer switch.

Bulb Replacement

Replace bulb when light output diminishes or fails.

1. Turn off lamp and unplug from outlet. Allow bulb to cool if recently used.
2. Gently unscrew old bulb counterclockwise.
3. Screw in new E26/E27 LED bulb (max 7W) clockwise until snug.
4. Plug in and test.

Tip: Always match bulb base type and do not exceed maximum wattage.

Positioning & Adjustments

For best performance and safety.

1. Place on stable, level surface away from edges.
2. Keep away from flammable materials (curtains, bedding).
3. Adjust head angle to avoid glare on screens or eyes.
4. Ensure cord is not pinched or a tripping hazard.

WARNING! Do not place lamp where it can be easily knocked over.

Safety Features

Designed with safety in mind: Overheat protection via wattage limit, stable weighted base, insulated wiring.

Care & Cleaning

Unplug lamp before cleaning. Use dry, soft cloth to dust. For marks, use slightly damp cloth, then dry immediately.

CAUTION! Do not immerse in water or use abrasive cleaners. Never spray liquids directly onto lamp.

Warranty Information

IKEA limited warranty applies. For details, check IKEA warranty policy or contact IKEA customer service. Copyright © IKEA of Sweden AB. For support, visit www.ikea.com or contact your local IKEA store.

Troubleshooting

Service: For non-working products, contact IKEA customer service or return to store with receipt.

Support: www.ikea.com