IKEA NUMRERAD 404.621.50 Wine Cooler instructions manual

The IKEA NUMRERAD 404.621.50 is a freestanding wine cooler designed for optimal storage of your wine collection. It features a sleek stainless steel finish, adjustable temperature control, vibration-free operation to protect wine sediment, UV-protected glass door, interior LED lighting, reversible door, and adjustable shelves. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Loading and Organizing Wine 8. Energy Saving Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Stainless steel exterior, UV-protected glass door, adjustable temperature control, interior LED light, reversible door hinges, adjustable wire shelves, vibration-free compressor.

Feature	Description
Temperature Control	Digital display with adjustable range (41°F to 64°F / 5°C to 18°C)
UV-Protected Glass Door	Protects wine from harmful light exposure
Interior LED Lighting	Energy-efficient lighting to view bottles without heat
Reversible Door	Door can be hinged on left or right side
Adjustable Shelves	Wire shelves can be repositioned for different bottle sizes
Vibration-Free Compressor	Minimizes disturbance to wine sediment
Power Indicator	LED shows when unit is powered on
Door Lock	Optional lock to secure wine collection
Alarm Function	Audible alert for temperature fluctuations
Energy Saving Mode	Reduces power consumption during low use

Installation

Unpack and inspect contents. Place on level, stable surface.

Remove all packaging materials and protective film.
Position the wine cooler in a well-ventilated area away from heat sources and direct sunlight.
Ensure at least 4 inches (10 cm) clearance on all sides for proper airflow.
Adjust the leveling feet to stabilize the unit if floor is uneven.
If reversing door, follow hinge reversal instructions in separate door reversal guide.

WARNING! Do not install near ovens, radiators, or in damp locations. Ensure proper ventilation to prevent overheating.

First-Time Setup

After installation, allow the wine cooler to stand upright for 4 hours before plugging in.

Plug the power cord into a dedicated 115V/120V, 60Hz grounded outlet.
Press the POWER button to turn on the unit.
Set desired temperature using the UP/DOWN buttons (recommended: 55°F/13°C for red wines).
Allow 24 hours for the unit to reach and stabilize at the set temperature.
Load wine bottles after temperature stabilization.

CAUTION! Do not overload shelves. Maximum capacity: 30 standard Bordeaux bottles.

Specifications

Model: NUMRERAD 404.621.50
Type: Freestanding wine cooler
Capacity: 30 standard 750ml bottles
Temperature Range: 41°F to 64°F (5°C to 18°C)
Exterior Finish: Stainless steel
Door: UV-protected tempered glass
Shelves: 5 adjustable chrome wire shelves
Lighting: Interior LED
Power: 115V/120V, 60Hz, 1.5A
Dimensions (HxWxD): 34.25" x 23.625" x 22.875" (87cm x 60cm x 58cm)
Annual Energy Consumption: 215 kWh

Controls and Settings

Control panel located on top front of unit.

Buttons: POWER, TEMP UP, TEMP DOWN, LIGHT, ALARM RESET, ENERGY SAVING.

Temperature Setting: Press TEMP UP/DOWN to adjust. Display shows current temperature. Light Control: Press LIGHT to turn interior LED on/off. Alarm: Flashing display and audible beep if temperature exceeds set range by ±5°F. Press ALARM RESET to acknowledge. Energy Saving: Press to activate eco-mode (reduces compressor cycles). Install: Ensure unit is level using built-in bubble level. Door Adjustment: Reverse door using included hinge kit if needed.

Connecting to Power

Use only a properly grounded electrical outlet.

Ensure wine cooler is turned OFF before plugging in.
Plug the 3-prong power cord directly into wall outlet. Do not use extension cords.
Turn on using POWER button.
Verify power indicator LED is illuminated.

Tip: For best performance, use a dedicated circuit. Avoid sharing outlet with other appliances.

Loading and Organizing Wine

Designed for standard 750ml Bordeaux bottles. Can accommodate some Burgundy and Champagne bottles.

Adjust shelves: Remove or reposition shelves to accommodate different bottle sizes.
Load bottles: Place bottles with labels facing upward for easy identification.
Organization: Store red wines at bottom (cooler), white wines at top (slightly warmer).
Air circulation: Do not block air vents at rear of unit.
Long-term storage: Store bottles on their sides to keep corks moist.
Capacity: Do not exceed 30 bottles to maintain proper air circulation.

WARNING! Do not store perishable food items. This unit is designed for wine storage only.

Energy Saving Features

Energy Saving Mode: Reduces compressor operation during periods of stable temperature. Activated via ENERGY SAVING button. Door Open Alarm: Audible alert if door remains open for more than 2 minutes. Vacation Mode: Set temperature to 60°F (15.5°C) when away for extended periods.

Care & Cleaning

Unplug before cleaning. Clean interior and exterior with mild detergent and warm water. Dry thoroughly.

Remove all bottles and shelves.
Wipe interior with soft cloth dampened with water and mild detergent.
Clean glass door with glass cleaner (avoid spraying directly on unit).
Wipe exterior with stainless steel cleaner to maintain finish.
Clean condenser coils annually with vacuum or soft brush.
Reinstall shelves and bottles only after interior is completely dry.

CAUTION! Never use abrasive cleaners, scouring pads, or solvents. Do not pour water directly into unit.

Regulatory Information

UL Listed: Complies with UL Standard 250. Energy Star: Meets ENERGY STAR® requirements for energy efficiency. California Proposition 65 Warning: This product may contain chemicals known to cause cancer or reproductive harm. For support, visit www.ikea.com or contact IKEA US Customer Service at 1-888-888-4532.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not cooling	Power issue/vent blockage	Check power connection; ensure vents are not blocked; wait 24 hours after initial startup.
Temperature too warm	Room temperature high/door seal	Ensure room temperature below 90°F (32°C); check door seal; clean condenser coils.
Excessive noise	Unit not level/objects touching	Level the unit; ensure bottles are not touching interior walls.
Door not closing properly	Shelves misaligned/obstruction	Adjust shelf positions; check for bottle obstruction; ensure unit is level.
Alarm sounding	Temperature fluctuation/door open	Check temperature setting; ensure door is fully closed; press ALARM RESET.
Condensation inside	High humidity/frequent opening	Reduce door openings; ensure room humidity below 70%; check door seal.

Reset: Unplug for 5 minutes, then replug to reset control system.

Service: 1-888-888-4532; www.ikea.com