IKEA NORDVIKEN 003.691.11 Chair instructions manual

The IKEA NORDVIKEN 003.691.11 is a sturdy dining chair featuring a solid wood frame, curved backrest for comfort, and a durable lacquered finish. Designed for everyday use, it requires assembly and includes all necessary hardware and tools. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.

1. Parts & Hardware Included 2. Safety Information 3. Assembly Instructions 4. Care & Maintenance 5. Specifications 6. Troubleshooting 7. Warranty & Support

Parts & Hardware Included

Before assembly, verify all parts are present. Contact IKEA if any items are missing.

Part NameQuantityDescription
Chair Back1Curved solid wood backrest with pre-drilled holes
Chair Seat1Solid wood seat panel
Front Legs2Tapered solid wood legs
Rear Legs2Solid wood legs with backrest attachment points
Side Rails2Connecting rails between legs
Wood Dowels88mm diameter, for joint reinforcement
Cam Lock Nuts4For securing side rails
Screws12Various lengths for assembly
Allen Key1Included tool for tightening screws
Instruction Manual1This document

Safety Information

Read all instructions before assembly. Ensure a safe workspace.

  1. Assembly requires two people for stability and safety.
  2. Keep small parts away from children to avoid choking hazards.
  3. Assemble on a soft surface (e.g., carpet) to prevent scratches.
  4. Do not overtighten screws; this may damage the wood.

WARNING! Chair is heavy; lift with care to avoid injury. Ensure all connections are tight before use.

Assembly Instructions

Follow steps in order. Use included Allen key for all screws.

  1. Attach Legs to Seat: Insert wood dowels into pre-drilled holes on underside of seat. Align front and rear legs, then press firmly to secure dowels.
  2. Secure with Screws: Using the Allen key, tighten screws through leg brackets into seat. Do not fully tighten until all screws are started.
  3. Connect Side Rails: Insert cam lock nuts into ends of side rails. Align rails between front and rear legs, then turn cam locks clockwise to lock.
  4. Attach Backrest: Position backrest onto rear legs. Insert screws through back brackets into legs and tighten securely.
  5. Final Tightening: Ensure chair is square, then fully tighten all screws. Wipe away any wood dust.

CAUTION! Do not stand on chair. Maximum load: 110 kg (242 lbs).

Care & Maintenance

Tip: Use felt pads under legs to protect floors.

Specifications

Troubleshooting

SymptomPossible CauseCorrective Action
Chair wobblesUneven legs or loose screwsCheck floor level; tighten all screws and cam locks.
Screws not tighteningStripped threads or misalignmentEnsure parts are aligned; do not force. Contact IKEA for replacement parts.
Backrest feels looseBackrest screws not secureTighten screws connecting backrest to rear legs.
Wood cracks during assemblyOver-tightening or forced alignmentStop assembly; contact IKEA customer service for guidance.
Missing partsPackage incompleteRefer to parts list; contact IKEA with product number for missing items.

Note: Do not use glue unless specified; it may void warranty.

Warranty & Support

IKEA offers a 10-year limited warranty covering material and manufacturing defects. Warranty does not cover damage from misuse, improper assembly, or normal wear. For support, visit www.ikea.com or contact your local IKEA store.

Product Number: 003.691.11

Spare Parts: Available at IKEA stores or online.

Recycling: Disassemble and recycle materials according to local regulations.

IKEA NORDVIKEN 003.691.11 Chair instructions manual © - All Rights Reserved 2025