IKEA NORDLI 193.842.44 Top & Base instructions manual

The IKEA NORDLI 193.842.44 is a modular bed frame system consisting of a sturdy base and a separate top/headboard. Designed for flexibility and storage, it features underbed drawers, adjustable slats, and a minimalist Scandinavian design. Below are key sections for safety, assembly, parts identification, installation, use, care, and troubleshooting.

Parts & Components

Key components: Bed base frame, Headboard/Top panel, Side rails, Center support beam, Slats, Drawer frames, Drawer fronts, Hardware pack.

Tools Required

Tools needed for assembly (not included).

• Phillips screwdriver
• Hex key (Allen wrench) - included in hardware pack
• Hammer (for tapping dowels)
• Soft mallet (optional, for adjusting parts)
• Level (optional, for checking stability)

NOTE: Ensure you have all tools ready before starting assembly.

Safety Instructions

Read all instructions before assembly. Use caution to prevent injury.

1. Assemble on a soft, clean surface to avoid scratching parts.
2. Use two people for lifting and assembling large components.
3. Ensure all bolts and screws are tightened securely.
4. Check stability before placing mattress and using bed.
5. Keep small hardware away from children and pets.

WARNING! Bed frame is heavy; lift with your legs, not your back. Do not stand on or jump on the bed frame.

Assembly Steps

Follow steps in order. Allow 60-90 minutes for assembly.

1. Prepare area: Clear space; lay out all parts and hardware.
2. Connect side and end frames: Attach end frames (B) to side frames (A) using cam locks and dowels. Tighten with hex key.
3. Install center support beam: Place beam (C) in center; attach to side frames with provided screws.
4. Add slat supports: Install metal brackets along inner sides of frame to hold slats.
5. Place wooden slats: Lay slats (E) evenly across frame, resting on brackets.
6. Check stability: Ensure frame is square and all connections are tight.

CAUTION! Do not overtighten screws; this may strip the particleboard.

Attaching the Top/Headboard

The headboard/top panel attaches to the base frame.

1. Position headboard (D) against wall at head of bed frame.
2. Align pre-drilled holes on headboard with holes on bed base end frame.
3. Insert screws through headboard into frame; tighten securely with screwdriver.
4. Check that headboard is vertical and stable.

Tip: For stability, attach headboard to wall using wall anchors (not included) if possible.

Drawer Installation

Drawers slide under bed frame for storage.

1. Assemble drawer frames (F) according to separate drawer instructions.
2. Attach drawer fronts (G) to drawer frames using provided screws.
3. Slide drawer assemblies into openings under bed frame.
4. Install drawer glides on frame if included; ensure drawers slide smoothly.
5. Adjust drawer fronts for alignment if necessary.

NOTE: Do not overload drawers. Ensure drawers are fully closed before using bed.

Mattress & Slat Setup

Proper setup ensures mattress support and comfort.

1. Ensure all slats are evenly spaced and secured on brackets.
2. Place mattress centered on slats. Recommended mattress thickness: 8-12 inches.
3. Check that mattress does not overhang frame significantly.
4. Adjust slat tension if adjustable slats are included (not all models).

WARNING! Use only mattress sizes compatible with frame (e.g., Queen, King). Do not use without slats.

Care & Maintenance

Clean with damp cloth; avoid harsh chemicals.

• Wipe surfaces with soft, damp cloth; dry immediately.
• Do not use abrasive cleaners, ammonia, or solvents.
• Tighten bolts and screws periodically to maintain stability.
• Check slats and supports for damage or wear annually.

CAUTION! Avoid excessive moisture; particleboard may swell if wet.

Weight Limits & Specifications

• Frame Material: Particleboard, fiberboard, steel.
• Finish: White, stained, or other finishes as per model.
• Overall Dimensions: Varies by bed size (Queen approx. 63"W x 86"D).
• Underbed Clearance: Sufficient for drawer installation.
• Max Weight Capacity: Frame: 600 lbs distributed evenly. Drawers: 55 lbs each.
• Mattress Compatibility: Queen, King, or other sizes as specified.

Troubleshooting

Support: For missing parts or further assistance, contact IKEA customer service at 1-888-888-4532 or visit www.ikea.com.