IKEA NORDLI 004.731.79 Top & Base instructions manual

The IKEA NORDLI 004.731.79 is a modular bed frame system consisting of a sturdy base and a separate top/headboard. Designed for flexibility and storage, it features underbed storage drawers, a slatted bed base for mattress support, and a solid wood construction. Below are key sections for safety, assembly, parts identification, installation, care, and troubleshooting.

Parts & Components

Key components: Bed base frame, Side rails, Center support beam, Slatted bed base, Top/Headboard panel, Drawer frames, Drawer fronts, Casters, Assembly hardware pack.

Tools Required

Assembly requires basic household tools.

1. Hex key (Allen wrench) - provided in hardware pack.
2. Phillips screwdriver.
3. Hammer (for tapping dowels).
4. Soft mallet (optional, for adjusting parts).

NOTE: Ensure you have a clear, flat workspace large enough to lay out all parts.

Safety Instructions

Read all instructions before assembly. Follow safety guidelines.

1. Assemble on a soft surface (carpet or blanket) to avoid scratching parts.
2. Use two people for lifting and assembling the frame; parts are heavy.
3. Ensure all screws and cam locks are fully tightened before use.
4. Check stability of the bed frame before placing mattress and weight.

WARNING! Do not allow children to play with or climb on the bed during assembly. Keep small hardware away from children.

Assembly Steps

• Step 1: Lay out all parts and identify using the included diagram.
• Step 2: Attach the center support beam to the side rails using the provided cam locks and screws.
• Step 3: Secure the side rails together at the head and foot of the bed using the corner brackets.
• Step 4: Install the caster wheels into the pre-drilled holes on the bottom of the side rails.
• Step 5: Place the slatted bed base onto the support ledges inside the frame.
• Step 6: Ensure the slats are evenly spaced and secure.

Tip: Do not fully tighten cam locks until all parts are aligned.

Attaching the Top/Headboard

The top panel serves as a headboard and must be securely attached.

1. Position the top panel vertically at the head of the bed frame.
2. Align the pre-drilled holes in the panel with the holes in the side rails.
3. Insert the provided dowels into the holes on the side rails.
4. Gently tap the top panel onto the dowels using a soft mallet.
5. Secure with screws through the back of the panel into the side rails.
6. Check that the headboard is stable and does not wobble.

CAUTION! Ensure the bed frame is against a wall during headboard attachment to prevent tipping.

Installing Storage Drawers

The NORDLI system includes underbed storage drawers.

1. Slide the drawer frame assemblies into the openings under the bed base.
2. Ensure the frames are fully seated on the support rails.
3. Attach the drawer front panels to the drawer frames using the provided screws.
4. Test the drawer slides by opening and closing several times.
5. Adjust drawer alignment if necessary by loosening the screws on the drawer fronts.

Note: Drawers may require periodic lubrication of slides with silicone spray if they become stiff.

Care & Maintenance

To maintain appearance and function.

• Wipe surfaces with a damp cloth and mild detergent; dry immediately.
• Avoid abrasive cleaners or solvents.
• Tighten screws and cam locks periodically as furniture may settle.
• Check caster wheels for debris and clean if necessary.

CAUTION! Do not use excessive water when cleaning; avoid direct heat sources.

Weight Limits & Specifications

Troubleshooting

Replacement Parts: Contact IKEA for missing or damaged components.

Warranty & Support

IKEA Limited Warranty: 10 years for frame, 1 year for moving parts (casters, drawer slides). Proof of purchase required. For assembly support or missing parts, visit www.ikea.com or contact your local IKEA store.

Customer Service: 1-888-888-4532 (IKEA-USA)