IKEA NORDLI 003.838.19 Top & Base instructions manual

The IKEA NORDLI 003.838.19 is a modular bed frame system consisting of a sturdy base and a separate top/headboard. Designed for flexibility and storage, it features a slatted bed base, integrated storage options, and a robust construction. Below are key sections for safety, assembly, features, setup, care, and troubleshooting.

1. Features at a Glance 2. Parts & Hardware 3. Safety Instructions 4. Assembly Instructions 5. Specifications 6. Setup & Configuration 7. Storage Features 8. Care & Maintenance 9. Warranty Information 10. Troubleshooting

Features at a Glance

Key components: Sturdy bed base with slats, modular headboard/top section, integrated storage drawers, adjustable legs, and connection hardware.

Feature	Description
Modular Design	Separate top/headboard and base for flexible configuration
Slatted Bed Base	Provides ventilation and mattress support
Integrated Storage	Optional drawers that fit under the bed frame
Adjustable Legs	Allows for height adjustment on uneven floors
Robust Construction	Made from particleboard, fiberboard, and steel
Connection System	Cam locks and screws for secure assembly
Headboard/Top Section	Can be attached to the base or wall for stability
Weight Capacity	Designed to support standard mattress and occupants
Finish	White stained ash veneer and foil
Compatibility	Designed for use with NORDLI storage units

Parts & Hardware

Unpack and verify all parts against the included parts list.

Main Base Frame Sections (Left, Right, Front, Back Rails)
Slatted Bed Base (multiple wooden slats)
Headboard/Top Panel
Support Legs (with adjustable feet)
Drawer Runners (if storage drawers included)
Hardware: Cam locks, screws, dowels, Allen key

WARNING! Do not discard any packaging until all parts are verified. Missing parts? Contact IKEA.

Safety Instructions

Read all instructions before assembly. Ensure a safe environment.

Assembly requires two people due to size and weight.
Assemble on a soft surface to avoid scratching parts.
Ensure all screws and cam locks are fully tightened.
Check stability before use. Do not exceed weight limit.
Secure the headboard to the wall if recommended, especially in children's rooms.

CAUTION! Heavy parts; lift with care to avoid injury. Keep small hardware away from children.

Assembly Instructions

Follow the numbered steps in the included pictorial guide.

Connect the side rails to the headboard and footboard using cam locks and dowels.
Attach the center support beam to the side rails.
Install the adjustable legs to the bottom of the frame.
Place the slatted bed base onto the support rails.
If applicable, attach the headboard/top section to the base or wall.
Install drawer runners and storage drawers (optional).
Check all connections and tighten screws fully.

Tip: Use the provided Allen key for all screws. Do not overtighten cam locks.

Specifications

Article Number: 003.838.19
Design: NORDLI series
Main Material: Particleboard, Fiberboard, Steel
Finish: White stained ash veneer, Foil
Slatted Bed Base: Birch veneer, Polypropylene plastic
Max Mattress Thickness: Consult manual for exact clearance
Weight Capacity: Refer to product label on frame
Storage Drawers: Sold separately (compatible NORDLI drawers)
Tools Required: Allen key (included)
Assembly Time: Approximately 60-90 minutes with two people

Setup & Configuration

Position the assembled bed in your room.

Place the bed frame in the desired location.
Adjust the feet to ensure the bed is level and stable on the floor.
Place the mattress onto the slatted bed base.
If attaching the headboard to the wall, use appropriate wall anchors (not always included).
Configure storage drawers for easy access.

Note: Allow space for drawers to open fully. Do not place near direct heat sources.

Storage Features

The NORDLI system is designed for under-bed storage.

Drawers roll smoothly on runners.
Ensure drawers are properly aligned and fully seated on runners.
Do not overload drawers. Distribute weight evenly.
For maintenance, occasionally vacuum the runner tracks.

WARNING! Keep drawers closed when not in use to prevent tripping.

Care & Maintenance

Clean with a damp cloth and mild detergent. Wipe dry immediately.

Do not use abrasive cleaners, scouring pads, or solvents.
Tighten screws and cam locks periodically as furniture may settle.
Check the stability of the frame every few months.
Protect from excessive moisture and direct sunlight.

CAUTION! Never stand or jump on the bed frame or storage drawers.

Warranty Information

IKEA limited warranty applies. Refer to the IKEA warranty document for terms. This product is designed for domestic use only. For warranty claims, contact your local IKEA store with your receipt and article number (003.838.19).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Bed frame is wobbly	Loose screws or cam locks	Tighten all screws and cam locks fully. Check that all dowels are inserted.
Slats are sagging or falling out	Slats not properly seated on rails	Re-position each slat onto the support rails. Ensure center beam is installed.
Drawers are sticking	Misaligned runners or overloaded	Remove drawer, realign runners, and ensure nothing is blocking the track. Reduce load.
Headboard is not stable	Not secured to wall or base	If free-standing, ensure it is correctly attached to base with all hardware. For wall attachment, use suitable wall anchors.
Squeaking noises	Wood parts rubbing, loose joints	Tighten all connections. Apply a small amount of furniture wax or soap to rubbing wood surfaces.

Support: Visit www.ikea.com or contact your local IKEA store for spare parts or assembly help.