IKEA NORDKISA 604.476.77 Nightstand instructions manual

The IKEA NORDKISA 604.476.77 is a nightstand crafted from bamboo, featuring a natural, open-weave design that provides ventilation. It includes a drawer with a metal handle, a lower shelf for additional storage, and requires assembly. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.

1. Parts & Hardware 2. Safety Information 3. Assembly Instructions 4. Care & Maintenance 5. Product Specifications 6. Troubleshooting 7. Warranty & Support

Parts & Hardware

All components included in the package. Check contents before starting assembly.

Part NameQuantityDescription/Image Ref.
Side Panel (Bamboo)2Left and right side panels with pre-drilled holes.
Back Panel (Bamboo)1Rear panel with ventilation weave.
Top Panel (Bamboo)1Tabletop surface.
Bottom Shelf (Bamboo)1Lower shelf for storage.
Drawer Front1Bamboo drawer front with handle pre-attached.
Drawer Sides & Back3Bamboo panels forming drawer box.
Drawer Bottom1Thin bamboo panel.
Cam Lock Nuts8Plastic locking nuts for panel connections.
Screws20Various lengths for frame and drawer assembly.
Wooden Dowels10For aligning and reinforcing panels.
Drawer Runner Set2Metal slides for smooth drawer operation.
Allen Key1Tool provided for tightening cam locks.

Safety Information

Read all instructions before assembly. Ensure a safe working environment.

  1. Work Area: Assemble on a clean, soft surface (e.g., carpet or blanket) to prevent scratches.
  2. Lifting: The assembled nightstand is heavy. Lift with your legs, not your back. Use two people if needed.
  3. Tool Use: Use only the provided tools. Ensure all fasteners are tightened securely to prevent instability.
  4. Children: Keep small parts away from children during assembly to avoid choking hazards.
  5. Final Placement: Place the nightstand on a level, stable floor. Do not place on uneven or wet surfaces.

WARNING! Failure to follow assembly instructions may result in instability and risk of injury or damage.

Assembly Instructions

Follow steps in order. Allow approximately 45-60 minutes for assembly.

  1. Prepare Parts: Lay out all parts and hardware. Identify each piece using the included guide.
  2. Assemble Main Frame:
    • Insert wooden dowels into the pre-drilled holes on the inside faces of the two Side Panels.
    • Attach the Back Panel to the Side Panels using the dowels for alignment. Secure with cam lock nuts, tightening with the Allen Key.
    • Attach the Bottom Shelf to the Side Panels using the same method (dowels and cam locks).
  3. Attach the Top:
    • Place the Top Panel onto the assembled frame, aligning the dowel holes.
    • Secure from underneath using the provided screws.
  4. Assemble the Drawer:
    • Connect the Drawer Sides to the Drawer Front using dowels and screws.
    • Attach the Drawer Back to complete the box.
    • Slide the Drawer Bottom into the grooves on all four sides and secure with small screws underneath.
  5. Install Drawer Runners:
    • Attach one runner to each inner side of the nightstand frame using screws.
    • Attach the matching runner to each side of the drawer box.
  6. Final Installation:
    • Carefully slide the drawer into the frame, ensuring the runners engage smoothly.
    • Test the drawer opening and closing. Adjust runner alignment if necessary.
  7. Check Stability: Ensure all cam locks are fully tightened (a click sound indicates they are locked). Gently rock the nightstand to check for stability.

Tip: Do not overtighten screws into bamboo, as it may split. Tighten until snug.

Care & Maintenance

Proper care will maintain the appearance and longevity of your bamboo nightstand.

CAUTION! Bamboo is a natural material. Exposure to extreme humidity or temperature changes may cause slight warping or cracking.

Product Specifications

Troubleshooting

IssuePossible CauseSolution
Nightstand wobblesUneven floor; loose fastenersPlace on level surface. Check and tighten all cam locks and screws, especially in the frame corners.
Drawer sticks or is difficult to openRunners misaligned; drawer overloadedRemove drawer, check runner alignment on both frame and drawer. Reinstall carefully. Do not exceed max load.
Gap between panelsDowels not fully inserted; cam locks not engagedDisassemble the connection. Ensure dowels are fully seated in holes before tightening cam locks.
Missing part or hardwarePackage incompleteCheck all packaging materials. Contact IKEA customer support with your article number (604.476.77) and receipt.
Bamboo has a crack or splitOvertightened screw; natural characteristicFor small splits, it may be a natural grain variation and not affect stability. For significant damage, contact IKEA for a replacement part.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms included in the packaging or available at IKEA stores.

Note: Always keep your receipt as proof of purchase.

IKEA NORDKISA 604.476.77 Nightstand instructions manual © - All Rights Reserved 2025