IKEA NORDKISA 004.394.68 Wardrobe instructions manual

The IKEA NORDKISA 004.394.68 is a freestanding wardrobe with a bamboo frame and metal mesh panels, featuring two adjustable shelves, a clothes rail, and a sliding door. It requires assembly and is designed for indoor use. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.

1. Parts & Hardware Included 2. Tools Required 3. Safety Instructions 4. Assembly Steps 5. Adjusting Shelves & Rail 6. Door Installation & Adjustment 7. Care & Maintenance 8. Specifications 9. Troubleshooting 10. Warranty & Support

Parts & Hardware Included

Check that all parts are present before starting assembly. Contact IKEA if any parts are missing.

Part Number	Description	Quantity
100001	Bamboo side panel	2
100002	Bamboo top panel	1
100003	Bamboo bottom panel	1
100004	Bamboo back panel	1
100005	Metal mesh door panel	1
100006	Metal mesh side panel	2
200001	Adjustable shelf	2
300001	Clothes rail	1
400001	Cam lock screw	12
400002	Wooden dowel	10
400003	Door roller	4
400004	Rail bracket	2
400005	Shelf pin	8
500001	Assembly tool (Allen key)	1

Tools Required

You will need the following tools (not included):

Phillips screwdriver
Hammer (for tapping dowels)
Level (optional, for final adjustment)

Note: The included Allen key is for cam lock screws only.

Safety Instructions

Read all instructions before assembly. Keep children and pets away during assembly.

Stability: Assemble on a soft, flat surface to avoid scratches. Ensure wardrobe is level and against a wall after assembly.
Lifting: The wardrobe is heavy. Use two people to lift and move it.
Hardware: Keep small parts away from children to avoid choking hazard.
Wall Anchoring: For safety, secure the wardrobe to the wall using appropriate wall anchors (not included).

WARNING! An unsecured wardrobe can tip over and cause serious injury. Always secure to wall.

Assembly Steps

Follow steps in order. Do not fully tighten screws until all parts are aligned.

Prepare Panels: Lay side panels (100001) flat. Insert wooden dowels (400002) into pre-drilled holes.
Attach Bottom Panel: Connect bottom panel (100003) to side panels using cam lock screws (400001). Tighten partially.
Attach Top Panel: Connect top panel (100002) to side panels. Ensure frame is square before fully tightening all cam locks.
Install Back Panel: Slide back panel (100004) into grooves on side, top, and bottom panels. Secure with provided screws if applicable.
Install Mesh Panels: Attach metal mesh side panels (100006) to the inside of the frame using clips or screws as indicated.
Install Door Track: Attach the upper and lower door tracks to the top and bottom panels.

Tip: Do not force parts. If something doesn't fit, check orientation and alignment.

Adjusting Shelves & Rail

Shelves and clothes rail are adjustable to suit your storage needs.

Shelf Installation: Locate rows of pre-drilled holes on the inside of the side panels. Insert shelf pins (400005) into desired holes.
Place Shelves: Rest adjustable shelves (200001) on the pins. Ensure shelf is level and secure.
Clothes Rail: Attach rail brackets (400004) to side panels at desired height. Slide clothes rail (300001) into brackets.

Note: Maximum load per shelf: 15 kg. Maximum load on clothes rail: 20 kg.

Door Installation & Adjustment

The sliding door requires careful installation for smooth operation.

Install Rollers: Attach door rollers (400003) to the top and bottom of the door panel (100005).
Hang Door: Tilt door and hook top rollers into the upper track. Lower door so bottom rollers engage the lower track.
Adjustment: Use a screwdriver to adjust the rollers up/down or left/right to align the door and ensure smooth sliding. The door should glide quietly without catching.

CAUTION! Handle door with care. The metal mesh can have sharp edges.

Care & Maintenance

Proper care will extend the life of your wardrobe.

Cleaning: Wipe bamboo parts with a dry or slightly damp cloth. Clean metal mesh with a soft brush or dry cloth.
Avoid: Do not use abrasive cleaners, steel wool, or harsh chemicals. Avoid excessive moisture.
Inspection: Periodically check and tighten screws and rollers. Ensure the wardrobe remains level and securely anchored to the wall.

WARNING! Never climb on or hang excessive weight on the wardrobe.

Specifications

Article Number: 004.394.68
Dimensions (W x D x H): 90 cm x 55 cm x 180 cm
Material: Frame: Bamboo. Panels: Steel, Epoxy/polyester powder coating. Door: Steel mesh.
Weight: 35 kg (approx.)
Max. Load Shelf: 15 kg
Max. Load Rail: 20 kg
Package Weight: 40 kg

Troubleshooting

Issue	Possible Cause	Solution
Door does not slide smoothly	Rollers misaligned or track dirty	Adjust rollers with screwdriver. Clean track of debris.
Wardrobe wobbles	Uneven floor or loose screws	Check if floor is level. Tighten all cam lock screws and frame connections.
Shelf sags or is unstable	Overloaded or pins not fully inserted	Reduce load to under 15 kg. Ensure shelf pins are securely in place.
Gaps between panels	Frame not square during assembly	Loosen main screws, square the frame, then re-tighten.
Missing part	Packaging error	Contact IKEA customer service with article number (004.394.68) for replacement parts.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms for details.

Warranty Period: As per local IKEA policy (typically 1-10 years depending on component).
Support: For assembly help, missing parts, or warranty claims:
Visit: www.ikea.com
Contact your local IKEA store.
Use the IKEA app for assembly instructions.

Note: Keep your receipt as proof of purchase.