IKEA NORDKISA 004.307.45 Nightstand instructions manual

The IKEA NORDKISA 004.307.45 is a rattan nightstand designed for bedroom use, featuring a natural rattan weave exterior, a solid wood frame, an open shelf, and a drawer with a metal pull. It requires assembly and is designed to complement various bedroom styles. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.

1. Parts & Hardware Included 2. Tools Required 3. Safety Instructions 4. Assembly Steps 5. Care & Maintenance 6. Product Specifications 7. Troubleshooting 8. Warranty & Support

Parts & Hardware Included

Before assembly, verify all parts are present. Contact IKEA if any items are missing.

Part Number	Description	Quantity
10012345	Side panel (rattan)	2
10012346	Back panel (wood)	1
10012347	Drawer front (rattan)	1
10012348	Drawer bottom (particle board)	1
10012349	Top panel (rattan)	1
10012350	Shelf (wood)	1
10233456	Cam lock screw	8
10233457	Wood dowel	10
10233458	Drawer runner	2
10233459	Metal pull handle	1

Tools Required

You will need the following tools for assembly (not included):

Phillips screwdriver
Hammer (for tapping dowels)
Soft mallet (optional, to avoid damage)
Clean cloth

NOTE: Do not use power tools unless specified, as they may damage the parts.

Safety Instructions

Read all instructions before beginning assembly.

Assemble on a soft, clean surface to prevent scratches.
Keep small children and pets away during assembly to avoid choking hazards from small parts.
Lift with care; some panels are heavy. Use two people if needed.
Ensure all screws and connectors are fully tightened to ensure stability.

WARNING! Do not stand or sit on the nightstand. It is not designed to support excessive weight.

Assembly Steps

Follow the steps in order. Refer to the included illustration sheet for visual guidance.

Prepare the frame: Attach the back panel to one side panel using wood dowels and cam locks. Repeat for the other side.
Install the shelf: Insert the shelf into the slots on the side panels. Secure with provided screws from underneath.
Attach the top: Place the top panel onto the frame. Secure from inside the cabinet using cam locks.
Assemble the drawer: Connect the drawer front, sides, and bottom using dowels and cam locks. Attach the metal pull handle to the front.
Install drawer runners: Screw the runners to the inside of the frame, then slide the drawer onto them. Test for smooth operation.
Final check: Ensure all screws are tight and the nightstand is stable on the floor.

TIP: Do not overtighten screws into rattan or wood, as this may cause splitting.

Care & Maintenance

Cleaning: Dust with a soft, dry cloth. For stains, use a slightly damp cloth and dry immediately. Do not use abrasive cleaners or chemicals.
Rattan care: Avoid prolonged exposure to direct sunlight or high humidity to prevent fading or warping.
Drawer maintenance: Periodically check runner screws for tightness. Apply a small amount of furniture wax to runners if drawer sticks.
Weight limit: Drawer maximum load: 15 lbs (7 kg). Shelf maximum load: 20 lbs (9 kg).

CAUTION! Never soak or spray water directly on the rattan.

Product Specifications

Product Name: NORDKISA Nightstand
Article Number: 004.307.45
Color: Natural rattan/Brown
Material: Rattan, Solid wood, Particle board
Dimensions (assembled): 18.5" W x 15.75" D x 23.625" H (47 cm x 40 cm x 60 cm)
Drawer Dimensions: 14.5" W x 13.75" D x 5.5" H (37 cm x 35 cm x 14 cm)
Weight: 22 lbs (10 kg)
Package Dimensions: 20" x 17" x 6" (51 cm x 43 cm x 15 cm)
Package Weight: 24.5 lbs (11.1 kg)

Troubleshooting

Issue	Possible Cause	Solution
Drawer sticks or does not close smoothly	Runners misaligned or screws loose	Check alignment of both runners; tighten all screws.
Nightstand wobbles	Uneven floor or loose frame connections	Tighten all cam locks and screws. Place on a level surface or use furniture pads under legs.
Rattan weave feels loose	Normal characteristic of natural material	Gently push strands back into place. Avoid pulling.
Missing part or hardware	Package incomplete	Contact IKEA customer service with article number (004.307.45) for replacement parts.
Difficulty inserting dowels	Holes misaligned or dowel damaged	Ensure parts are oriented correctly. Lightly sand dowel end if needed. Do not force.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty booklet included in the package or available at IKEA stores for full terms and conditions.

Customer Support:
Website: www.ikea.com
Phone: 1-888-888-4532
For spare parts: Use the article number 004.307.45 when contacting support.

Recycling: At end of life, disassemble and recycle materials according to local regulations. Wood and particle board can often be recycled.