IKEA NORDEN 192.858.66 Table instructions manual

The IKEA NORDEN 192.858.66 is a versatile, solid wood gateleg table designed for flexible use in various spaces. It features two drop leaves that can be folded down to save space, making it ideal for small apartments or as an occasional dining/work surface. The table includes a drawer for storage, is pre-drilled for easy assembly, and comes with all necessary hardware. Below are key sections for safety, features, assembly, setup, care, and troubleshooting.

1. Features at a Glance 2. Parts & Hardware Included 3. Safety Instructions 4. Assembly Instructions 5. Setup & Adjustment 6. Care & Maintenance 7. Specifications 8. Warranty Information 9. Troubleshooting

Features at a Glance

Key components: Solid wood tabletop with two drop leaves, four legs, one drawer, metal hinges, and pre-attached hardware.

Feature	Description
Drop leaves	Two foldable leaves to extend or reduce table size
Drawer	Integrated drawer for small item storage
Solid wood construction	Made from durable solid wood (birch)
Gateleg mechanism	Folding leg supports for leaves when extended
Pre-drilled holes	For easier assembly with included hardware
Compact design	Folds down to save space when not in use
Natural finish	Light birch color with clear protective coating
Weight capacity	Supports up to 50 kg (110 lbs) when fully extended
Dimensions (folded)	Width: 85 cm, Depth: 85 cm, Height: 74 cm
Dimensions (extended)	Width: 85 cm, Depth: 155 cm, Height: 74 cm

Parts & Hardware Included

Unpack and verify all parts before assembly. Check against the parts list below.

Tabletop (1 piece)
Drop leaves (2 pieces)
Table legs (4 pieces)
Gateleg supports (2 pieces)
Drawer unit (1 piece)
Drawer front (1 piece)
Metal hinges (4 pieces)
Screws (various sizes)
Wooden dowels
Allen key (included)
Assembly instructions (this manual)

IMPORTANT! Do not discard packaging until assembly is complete. Inspect all parts for damage.

Safety Instructions

Follow these safety guidelines during assembly and use.

Assembly surface: Use a clean, flat, protected surface to avoid scratches.
Tool safety: Use correct tools; included Allen key is sufficient.
Lifting: Table is heavy; use two people for lifting and positioning.
Child safety: Ensure table is stable; supervise children around folding mechanisms.
Weight limit: Do not exceed 50 kg (110 lbs) distributed weight.
Folding mechanism: Keep fingers clear when raising or lowering leaves.

WARNING! Do not stand or sit on the table. Ensure all screws are tightened securely.

Assembly Instructions

Estimated assembly time: 45-60 minutes. Follow steps in order.

Attach legs: Position tabletop upside down on protected surface. Insert wooden dowels into pre-drilled holes on tabletop. Align legs and attach using included screws (Step A).
Install gateleg supports: Attach folding leg supports to underside of tabletop using hinges provided (Step B).
Attach drop leaves: Connect leaves to tabletop using remaining hinges. Ensure hinges are aligned and screws are tight (Step C).
Assemble drawer: Slide drawer unit into opening. Attach drawer front using screws from inside the drawer (Step D).
Final check: Turn table upright. Test folding mechanism. Tighten all screws. Ensure drawer opens and closes smoothly.

Tip: Do not overtighten screws into wood. Assemble in the room where table will be used.

Setup & Adjustment

After assembly, place and adjust table for optimal use.

Location: Place on even, stable floor. Avoid direct sunlight or heat sources.
Leaf operation: To extend, lift leaf and swing gateleg support into locked position. To fold, reverse process.
Drawer alignment: If drawer sticks, loosen screws on drawer front slightly, adjust, and retighten.
Leveling: If table wobbles, adjust by placing felt pads under shorter leg.
First use: Wipe with dry cloth before placing items.

Care & Maintenance

Proper care will maintain appearance and longevity.

Cleaning: Wipe with damp cloth and mild soap. Dry immediately.
Stains: For stubborn stains, use wood cleaner recommended for finished wood.
Protection: Use coasters under glasses and placemats under hot dishes.
Avoid: Do not use abrasive cleaners, ammonia, or silicone sprays.
Moisture: Wipe spills immediately to prevent water marks.
Mechanism: Periodically check hinge screws for tightness.

CAUTION! Never soak wood. Do not place near radiators or humidifiers.

Specifications

Article Number: 192.858.66
Material: Solid birch, Birch veneer, Acrylic lacquer
Color: Birch natural
Dimensions (Folded): Width: 85 cm, Depth: 85 cm, Height: 74 cm
Dimensions (Extended): Width: 85 cm, Depth: 155 cm, Height: 74 cm
Drawer dimensions: Width: 30 cm, Depth: 40 cm, Height: 8 cm
Weight: 28 kg (61.7 lbs)
Max load: 50 kg (110 lbs)
Package dimensions: 90 x 50 x 15 cm
Package weight: 30 kg (66 lbs)

Warranty Information

IKEA Limited Warranty: 10 years for structural integrity under normal household use. Warranty covers manufacturing defects in materials. Does not cover damage from improper assembly, accidents, misuse, or commercial use. Proof of purchase required.

For warranty claims, contact IKEA customer service with article number and receipt.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Table wobbles	Uneven floor or leg not tightened	Check floor; tighten leg screws; use felt pads under leg.
Drop leaf won't stay up	Gateleg not locked or hinge loose	Ensure gateleg clicks into locked position; tighten hinge screws.
Drawer sticks or is hard to open	Misaligned or swollen wood	Loosen drawer front screws, realign, retighten. Ensure room humidity is stable.
Screw won't tighten	Stripped hole or wrong screw	Use larger screw or wood filler; verify correct screw from parts list.
Gap between leaf and tabletop	Hinges misaligned	Loosen hinge screws, align leaf flush, retighten screws.
Scratches on surface	Assembly damage or use	Use wood touch-up pen (available at IKEA) for minor scratches.

Missing parts? Contact IKEA for replacement parts: 1-800-434-4532 or visit IKEA store.

Assembly help: Visit IKEA website for video instructions: www.ikea.com