IKEA NISSEDAL 305.037.78 Mirror instructions manual

The IKEA NISSEDAL 305.037.78 is a wall-mounted mirror designed for bathrooms and other rooms, featuring a sleek frame, safety backing, and adjustable wall mounting hardware. Below are key sections for safety, parts included, assembly instructions, mounting, care, and warranty information.

Parts Included

Check that all parts are present before starting assembly.

Tools Needed

You will need the following tools (not included):

• Phillips screwdriver
• Drill (for mounting into wall)
• Level
• Pencil
• Tape measure
• Wall anchors (if not using included plugs)

Safety Instructions

WARNING! To prevent injury and damage:

1. Assemble on a soft, clean surface to avoid scratching the mirror.
2. Use two people for handling the mirror – it is heavy and fragile.
3. Ensure wall is sturdy enough to support the mirror’s weight.
4. Mount mirror securely using appropriate wall fixings for your wall type.
5. Keep away from direct heat sources and high humidity unless designed for bathroom use.
6. Do not overtighten screws during assembly.

CAUTION! Glass edges may be sharp; handle with care.

Assembly Steps

Follow these steps to assemble the mirror frame:

1. Lay all frame pieces and connectors on a soft surface.
2. Insert corner connectors into the ends of each frame section.
3. Join the frame sections together to form a rectangle/square.
4. Gently tighten the connectors with a screwdriver (do not overtighten).
5. Place the mirror panel into the assembled frame, ensuring it sits evenly.
6. Secure the mirror by attaching any provided clips or retainers (if included).
7. Check that the mirror is firmly held and does not rattle.

Tip: Assemble near the mounting location to avoid moving the assembled mirror long distances.

Wall Mounting

Mount the mirror securely to the wall:

1. Decide on mounting height (recommended: center at eye level).
2. Hold the mirror against the wall and mark the bracket positions with a pencil.
3. Use a level to ensure marks are even.
4. Drill holes at marked positions, insert wall plugs if needed.
5. Attach wall brackets to the wall using provided screws.
6. With help, lift the mirror and hook it onto the brackets.
7. Check that the mirror is level and secure; tighten any safety screws on brackets.

WARNING! Always mount into wall studs or use appropriate anchors for drywall. Do not rely on plaster alone.

Care & Maintenance

To keep your mirror clean and safe:

• Use a soft, damp cloth to clean the glass. Avoid abrasive cleaners.
• For stubborn spots, use a mild glass cleaner. Spray onto cloth, not directly onto mirror.
• Dry the mirror after cleaning to prevent water spots.
• Do not use sharp or hard objects on the surface.
• Check mounting brackets periodically for tightness.

CAUTION! Do not use ammonia-based cleaners on the frame. Avoid excessive moisture on frame joints.

Specifications

• Model: NISSEDAL 305.037.78
• Dimensions: 80 cm x 120 cm (approx.)
• Weight: 12 kg (approx.)
• Frame Material: Aluminum
• Glass Type: Safety-backed mirror
• Mounting: Wall-mounted, horizontal or vertical orientation
• Intended Use: Indoor use, suitable for bathrooms (check humidity rating)
• Warranty: Refer to IKEA warranty terms

Troubleshooting

Warranty & Support

This product is covered by IKEA’s limited warranty. Refer to the IKEA warranty booklet for terms and duration.

For missing parts, assembly help, or product support:

• Visit: www.ikea.com
• Contact your local IKEA store
• Call IKEA customer service (see local number)

Note: Keep your receipt as proof of purchase.