IKEA NILSOLLE 104.621.23 Bar Stool instructions manual

The IKEA NILSOLLE 104.621.23 is a modern bar stool featuring a sturdy steel frame, a comfortable seat, and a footrest. Designed for indoor use at kitchen islands, bars, or counter-height tables. This manual provides essential information for safe assembly, use, care, and troubleshooting of your bar stool.

1. Parts & Hardware Included 2. Safety Information 3. Assembly Instructions 4. Specifications 5. Adjustments & Use 6. Weight Capacity & Stability 7. Care & Maintenance 8. Disposal Information 9. Warranty & Support 10. Troubleshooting

Parts & Hardware Included

Before assembly, verify all parts are present and undamaged.

Part Description	Quantity	Image Ref.
Seat	1	A
Main Frame (with footrest)	1	B
Legs (set of 4)	1 set	C
Plastic Glide Caps	4	D
Allen Key	1	E
Assembly Screws & Bolts	1 packet	F
Instruction Manual	1	-

Note: Check packaging for all small parts.

Safety Information

Read all instructions before assembly and use.

Assembly Surface: Assemble on a clean, soft surface to prevent scratches.
Tool Use: Use only the provided Allen key. Do not overtighten screws.
Stability Check: Ensure all legs are firmly attached and the stool is stable before first use.
Weight Limit: Do not exceed the maximum load capacity (see Specifications).
Usage: Designed for one person. Do not stand on the seat or footrest.

WARNING! Improper assembly can lead to instability and risk of injury. Ensure all connections are secure.

Assembly Instructions

Estimated assembly time: 15-20 minutes.

Attach Legs: Turn the main frame (B) upside down. Align one leg (C) with the pre-drilled holes on the frame. Insert and hand-tighten the provided screws. Repeat for all four legs.
Tighten Legs: Using the Allen key (E), fully tighten all screws connecting the legs to the frame. Ensure legs are perpendicular to the frame.
Attach the Seat: Place the seat (A) on top of the frame. Align the holes on the seat with the corresponding holes on the frame. Insert and tighten the screws from underneath using the Allen key.
Attach Glides: Press a plastic glide cap (D) onto the bottom of each leg. Ensure they are snug and even.
Final Check: Turn the stool upright. Gently rock it to check for stability. Re-tighten any loose connections if necessary.

Tip: For easier assembly, lay a towel or blanket on your work surface.

Specifications

Product Name: NILSOLLE
Article Number: 104.621.23
Color: Black
Material: Seat: Particleboard, foil. Frame & Legs: Steel, epoxy/polyester powder coating.
Dimensions (HxWxD): Height: 65 cm (25.6"), Seat Height: 45 cm (17.7"), Width: 34 cm (13.4"), Depth: 37 cm (14.6")
Footrest Height: 23 cm (9.1") from floor
Weight Capacity: Max load 100 kg (220 lbs)
Net Weight: 4.5 kg (9.9 lbs)

Adjustments & Use

This model is a fixed-height bar stool. No height adjustment is available.

Proper Use:

Position the stool on a flat, level surface.
Sit centered on the seat, using the footrest for comfort and stability.
To move the stool, lift it slightly; do not drag it across the floor as this may damage the glides and flooring.

Note: The seat is not intended to swivel or tilt.

Weight Capacity & Stability

Maximum Load: 100 kg (220 lbs). This includes the user and any items they are holding.

Ensuring Stability:

Always use on a firm, level floor.
Periodically check that all screws and bolts are tight (recommended every 3 months).
Do not lean back excessively or rock on the stool.
Inspect plastic glides regularly for wear and replace if damaged.

CAUTION! Exceeding the weight limit or using the stool improperly can cause it to tip over or break, resulting in injury.

Care & Maintenance

To clean and maintain your bar stool:

Frame & Legs (Steel): Wipe with a soft, damp cloth. Dry immediately. Do not use abrasive cleaners or scouring pads.
Seat (Foil): Wipe with a soft cloth dampened with water and a mild detergent if needed. Avoid solvents.
Glides: Keep free of debris. Wipe with a dry cloth.

CAUTION! Never soak or immerse any part of the stool in water. Avoid direct heat sources (e.g., radiators, ovens).

Disposal Information

This product is designed for disassembly to facilitate recycling.

At end of life, separate the materials where possible:

Metal Parts (Frame, Legs): Recycle as scrap metal.
Plastic Parts (Glides): Check local recycling guidelines for plastics.
Wood-based Parts (Seat): Dispose of according to local regulations for treated wood/particleboard.

Contact your local waste management authority for proper disposal methods. Do not dispose of with general household waste.

Warranty & Support

Refer to the IKEA guarantee document included with your purchase for full warranty terms and conditions.

For Support:

Visit the IKEA website: www.ikea.com
Contact your local IKEA store.
For spare parts (e.g., glides, screws), use the IKEA spare parts service online or in-store. Provide the article number: 104.621.23.

This manual is a supplement to the official IKEA assembly instructions (if provided). In case of discrepancy, follow the official IKEA instructions.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Stool wobbles	Uneven floor or loose legs	Check floor level. Tighten all leg screws with the Allen key. Ensure glides are fully inserted.
Squeaking noise	Loose connections	Tighten all screws connecting the seat to the frame and legs to the frame.
Scratches on floor	Missing or damaged glide caps	Check all four glides. Replace if missing or worn. Lift stool to move it.
Seat feels loose	Seat attachment screws loose	Tighten the screws underneath the stool that secure the seat to the frame.
Difficulty assembling	Parts misaligned	Disassemble and start step again, ensuring parts are correctly oriented as per diagrams.

Missing Parts? Contact IKEA customer service with your article number (104.621.23) for replacement parts.

Safety Concern? Stop using the stool immediately if it is damaged or unstable. Contact IKEA for advice.