IKEA NACKANÄS 705.180.61 Chair instructions manual

The IKEA NACKANÄS 705.180.61 is a modern, stackable chair designed for durability and comfort. It features a powder-coated steel frame, a curved plywood seat and backrest, and a sleek, minimalist design suitable for dining rooms, offices, or conference spaces. Below are key sections for safety, assembly, care, usage, and troubleshooting.

1. Parts & Tools Included 2. Safety Instructions 3. Assembly Steps 4. Specifications 5. Care & Maintenance 6. Usage Guidelines 7. Stacking Instructions 8. Warranty Information 9. Troubleshooting

Parts & Tools Included

Key components: Steel frame (legs and supports), Plywood seat/backrest unit, Plastic glides (4 pcs), Allen key (provided), Assembly screws and bolts.

Part Number	Description	Quantity
101	Steel frame assembly (legs)	1
102	Plywood seat & backrest unit	1
103	Plastic glides (foot caps)	4
104	Assembly screws (M6 x 20mm)	4
105	Allen key (4mm)	1

Safety Instructions

Read all instructions before assembly. Ensure a clean, flat workspace.

Keep small parts away from children during assembly to avoid choking hazards.
Assemble on a soft surface (e.g., carpet) to prevent scratching the frame or floor.
Do not exceed the maximum load capacity of 250 lbs (113 kg).
Check all connections are tight before first use and periodically thereafter.

WARNING! Chair is heavy; lift with care to avoid back injury. Do not stand on the chair.

Assembly Steps

Estimated assembly time: 10-15 minutes. Follow steps in order.

Attach the legs: Place the steel frame upside down on a protected surface.
Insert plastic glides: Press a glide onto the bottom of each leg tube until it clicks into place.
Attach the seat unit: Align the plywood seat/backrest with the pre-drilled holes on the frame.
Secure with screws: Using the provided Allen key, tighten the four screws firmly but do not overtighten.
Flip the chair upright and check stability. Ensure all glides are touching the floor evenly.

CAUTION! Overtightening screws may damage the plywood or strip the threads.

Specifications

Model: NACKANÄS 705.180.61
Dimensions (Assembled): Height: 32.7" (83 cm), Width: 18.9" (48 cm), Depth: 20.9" (53 cm)
Seat Height: 18.1" (46 cm)
Materials: Frame: Powder-coated steel; Seat/Back: Molded plywood with clear acrylic lacquer
Weight Capacity: Max 250 lbs (113 kg)
Weight (Chair): 15.4 lbs (7 kg)
Stackable: Yes, up to 6 chairs high
Color: Black/Brown (as per product line)

Care & Maintenance

Clean regularly to maintain appearance and longevity.

Steel Frame: Wipe with a soft, damp cloth. Dry immediately. Do not use abrasive cleaners or solvents.

Plywood Seat/Back: Wipe with a slightly damp cloth. For stubborn stains, use a mild soap solution. Never soak or use excessive water.

Plastic Glides: Check periodically for wear. Replace if cracked or missing to protect floors.

CAUTION! Do not expose to direct sunlight or extreme humidity for prolonged periods.

Usage Guidelines

Designed for indoor residential or commercial use.

Use on flat, stable surfaces only.
Do not drag the chair; lift to move to prevent damage to glides and floors.
The chair is not suitable for outdoor use.
Avoid placing near direct heat sources (radiators, fireplaces).

Tip: For even wear, occasionally rotate chair position if used in a fixed setting.

Stacking Instructions

Chairs can be stacked for efficient storage.

Ensure chairs are clean and dry before stacking.
Lift the chair and align the backrest of the top chair with the seat front of the chair below.
Gently lower until the chairs lock into the stacking position.
Do not stack more than 6 chairs high. The stack must be against a wall for stability.
To unstack, lift the top chair straight up and away.

WARNING! Never stack chairs on an uneven surface. Keep stacked chairs away from walkways.

Warranty Information

IKEA Limited Warranty: This product is covered by a 10-year limited warranty against manufacturing defects in materials and workmanship under normal residential use. Proof of purchase is required. The warranty does not cover damage due to accident, misuse, improper assembly, commercial use, or normal wear and tear. For warranty service, contact your local IKEA store or visit www.ikea.com.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Chair wobbles	Uneven floor or loose screws	Check floor level. Tighten all four assembly screws with the Allen key.
Glides fall off	Not fully seated or worn	Press firmly until click is heard. If damaged, order replacement glides (part #103).
Squeaking noise	Metal-on-metal friction	Check screw tightness. Apply a small amount of furniture wax to contact points between frame and seat unit.
Difficulty stacking	Misalignment or debris	Clean stacking points. Ensure chairs are aligned front-to-back before lowering.
Scratches on frame	Assembly on hard surface or abrasion	Assemble on a soft cloth or carpet. Minor scratches can be touched up with matching paint.

Missing Parts: Contact IKEA customer service with your product number (705.180.61) and proof of purchase.

Support: Visit www.ikea.com or your local IKEA store.