IKEA NÄMMARÖ 195.261.73 Bench instructions manual
The IKEA NÄMMARÖ 195.261.73 is an outdoor bench made from durable, weather-resistant acacia wood, designed for patios, decks, and garden areas. It features a sturdy slatted seat, a backrest for comfort, and a natural wood finish that can be treated with suitable outdoor oil to maintain its appearance. Below are key sections for safety, assembly, care, usage, and warranty information.
Package Contents & Tools Required
Before assembly, check all parts against the list below. Ensure no parts are missing or damaged.
| Part Description | Quantity | Part Number |
| Bench seat slats | 5 | 195.261.74 |
| Bench backrest slats | 3 | 195.261.75 |
| Side frames (left & right) | 2 | 195.261.76 |
| Front/back support beams | 2 | 195.261.77 |
| Backrest support bars | 2 | 195.261.78 |
| Screws (50mm) | 16 | 114.321.08 |
| Allen key (included) | 1 | - |
| Assembly instruction manual | 1 | - |
Tools you need: Phillips screwdriver (optional), rubber mallet (optional for tapping parts).
Safety Instructions
Read all instructions before assembly. Keep children and pets away during assembly.
- Assemble on a soft, clean surface to avoid scratching wood.
- Use correct screws as specified; do not overtighten.
- Check all connections are secure before use.
- Bench is for outdoor use; ensure it is placed on level ground.
- Maximum load capacity: 220 kg (485 lbs) distributed evenly.
WARNING! Do not stand on the bench. Avoid placing on uneven or slippery surfaces. Regular inspection recommended.
Assembly Instructions
Follow steps in order. Allow approximately 45-60 minutes for assembly.
- Prepare parts: Lay out all parts and hardware. Identify left and right side frames.
- Attach support beams: Connect front and back support beams to side frames using screws (4 screws per beam). Ensure beams are flush with bottom of side frames.
- Install seat slats: Place seat slats onto support beams, spacing evenly. Secure each slat with 2 screws (pre-drilled holes align).
- Attach backrest supports: Fix backrest support bars to rear of side frames using provided screws.
- Install backrest slats: Position backrest slats onto support bars, spacing evenly. Secure each with 2 screws.
- Final check: Tighten all screws. Ensure bench is stable and does not wobble.
Tip: If parts do not align easily, do not force; check orientation and try again.
Specifications
- Product Name: NÄMMARÖ Bench
- Article Number: 195.261.73
- Material: Solid acacia wood, weather-resistant
- Dimensions (L x W x H): 120 cm x 60 cm x 83 cm (47 ¼” x 23 ⅝” x 32 ⅝”)
- Seat Height: 45 cm (17 ¾”)
- Weight: 15 kg (33 lbs) assembled
- Max Load: 220 kg (485 lbs)
- Color/Finish: Natural acacia, untreated
- Intended Use: Outdoor residential use
Placement & Usage
For best performance and longevity, place bench properly.
- Choose a level, stable surface such as patio, deck, or garden path.
- Ensure adequate clearance around bench (at least 50 cm) for easy access.
- Do not place under heavy dripping trees or in areas with constant standing water.
- Use on grass or soil? Consider adding protective pads to feet to prevent sinking.
- For dining use, pair with NÄMMARÖ table of matching dimensions.
CAUTION! Do not drag bench; lift to move. Avoid placing near open flames or heat sources.
Care & Maintenance
Acacia wood is durable but requires care to maintain appearance outdoors.
- Cleaning: Use mild soap and water with soft cloth. Rinse with clean water. Dry thoroughly.
- Protection: Treat with IKEA outdoor wood oil or equivalent annually to protect from moisture and UV.
- Storage: If storing over winter, move to dry, covered area or use waterproof cover.
- Inspection: Check screws periodically; tighten if loose. Look for cracks or splinters; sand lightly if needed.
WARNING! Do not use abrasive cleaners, bleach, or pressure washers. Do not varnish or paint unless using products suitable for outdoor acacia.
Warranty Information
IKEA warranty covers material and manufacturing defects under normal residential use for the specified period.
- Warranty Period: 10 years for outdoor furniture (refer to IKEA terms in country of purchase).
- What is covered: Defects in wood, joint failures under normal use.
- What is not covered: Damage from improper assembly, accidents, neglect, lack of maintenance, or commercial use.
- Claim Process: Keep receipt. Contact IKEA customer service with article number and proof of purchase.
For more details, visit www.ikea.com or your local IKEA store.
Troubleshooting
| Issue | Possible Cause | Solution |
| Bench wobbles | Uneven ground or loose screws | Place on level surface; check and tighten all screws. |
| Wood cracking/splitting | Weather exposure or dry conditions | Apply outdoor wood oil; sand minor splinters; contact IKEA if severe. |
| Screws not tightening | Stripped thread or misaligned hole | Do not force; ensure screw is straight; use larger screw if hole stripped. |
| Discoloration or mold | Moisture accumulation | Clean with mild soap; dry thoroughly; improve air circulation; apply protective oil. |
| Parts missing/damaged | Packaging issue | Contact IKEA customer service with article number for replacement parts. |
Customer Support: Visit www.ikea.com or call your local IKEA store for assistance with assembly, parts, or warranty.
IKEA NÄMMARÖ 195.261.73 Bench instructions manual © - All Rights Reserved 2025