IKEA MÅNHULT 105.470.52 Chair instructions manual

The IKEA MÅNHULT 105.470.52 is a modern, stackable chair designed for durability and comfort. It features a powder-coated steel frame, a curved plywood seat for ergonomic support, and a sleek design suitable for various settings such as dining rooms, offices, or meeting areas. This manual provides essential information for safe assembly, proper use, care, and maintenance of your chair.

1. Parts & Tools Included 2. Safety Information 3. Assembly Instructions 4. Specifications 5. Adjustments & Usage 6. Weight Capacity & Stability 7. Care & Cleaning 8. Disassembly & Storage 9. Warranty Information 10. Troubleshooting

Parts & Tools Included

Before assembly, verify all parts are present and undamaged.

Part Name	Quantity	Description
Chair Frame (Legs & Backrest)	1	Pre-assembled powder-coated steel structure
Seat Panel	1	Curved plywood seat with pre-drilled holes
Mounting Screws	4	M6 x 16mm screws for attaching seat to frame
Plastic Caps	4	To cover screw heads after assembly
Allen Key	1	4mm hex key provided for assembly

Safety Information

Read all instructions before assembly and use.

Assembly Surface: Work on a clean, soft surface (e.g., carpet or blanket) to prevent scratching.
Tool Use: Use only the provided Allen key. Do not overtighten screws.
Weight Limit: Do not exceed the maximum load capacity (see Specifications).
Stability: Ensure all four legs are firmly on the floor before sitting.
Children: Do not allow children to play on or climb the chair.

WARNING! An incorrectly assembled chair can collapse, causing injury or damage. Follow steps precisely.

Assembly Instructions

Estimated assembly time: 10-15 minutes.

Prepare: Unpack all parts and lay them out. Identify the frame (upside down) and seat.
Attach Seat: Place the seat panel onto the frame, aligning the four pre-drilled holes with the threaded inserts on the frame.
Insert Screws: Using the provided Allen key, hand-tighten all four screws through the seat into the frame. Do not fully tighten yet.
Final Tightening: Once all screws are started, tighten each one firmly in a cross pattern (e.g., top-left, bottom-right) to ensure even pressure.
Cover Screws: Press the four plastic caps into the screw heads on the top of the seat for a finished look.
Inspect: Turn the chair upright. Check that all connections are secure and the chair does not wobble.

CAUTION! Do not stand on the seat or use the chair as a step ladder.

Specifications

Product Name: MÅNHULT
Article Number: 105.470.52
Frame Material: Steel, Epoxy/polyester powder coating
Seat Material: Plywood, Clear acrylic lacquer
Dimensions (W x D x H): 18.1" x 20.1" x 31.5" (46 x 51 x 80 cm)
Seat Height: 17.7" (45 cm)
Maximum Load: 242 lbs (110 kg)
Weight: 11 lbs (5 kg)
Packaging: Flat-pack
Designer: IKEA of Sweden

Adjustments & Usage

This is a fixed-height chair with no mechanical adjustments.

Proper Sitting Posture: Sit with your back against the curved backrest, feet flat on the floor. The seat is designed to provide passive ergonomic support.

Stacking: The MÅNHULT chair is stackable for space-saving storage. Stack a maximum of 6 chairs. Always lift chairs when stacking; do not drag.

Weight Capacity & Stability

The chair is tested for a maximum static load of 242 lbs (110 kg).

Do not exceed this limit.
Do not lean back on two legs or tilt the chair, as this can damage the frame and cause tipping.
Check tightness of screws periodically, especially after initial use.

Tip: For even wear, occasionally rotate the chair's position if used in a set.

Care & Cleaning

Regular care will maintain appearance and longevity.

Frame (Powder-coated steel): Wipe with a soft, damp cloth. Use a mild detergent if needed. Dry immediately. Do not use abrasive cleaners or scouring pads.

Seat (Lacquered plywood): Wipe with a dry or slightly damp cloth. Avoid excessive moisture. Do not use wax, polish, or furniture spray.

CAUTION! Never immerse the chair in water or use steam cleaners.

Disassembly & Storage

To disassemble for moving or storage, reverse the assembly steps.

Remove plastic caps with a flat tool.
Use the Allen key to loosen and remove the four screws.
Separate the seat from the frame.
Store all parts in a dry place, protected from sharp objects that could scratch the finish.

Note: Keep the assembly hardware in a labeled bag for future use.

Warranty Information

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms provided at the time of purchase or on www.ikea.com. The warranty covers material and manufacturing defects under normal household use for the specified period. Keep your receipt as proof of purchase.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Chair wobbles	Uneven floor or loose screws	Check floor level. Tighten all four mounting screws securely with the Allen key.
Squeaking noise	Loose connection between seat and frame	Disassemble, check for debris in screw holes, reassemble and tighten screws firmly.
Scratches on finish	Contact with sharp or abrasive objects	Prevent further damage. Small scratches can be touched up with matching paint (not supplied).
Plastic caps won't stay	Caps or screw heads damaged	Ensure screws are fully tightened and flush. Replace damaged caps if necessary.
Difficulty stacking	Chairs not aligned properly	Lift chairs straight up and lower gently onto the stack, aligning the backrests.

Missing Parts? Contact IKEA customer service with your article number (105.470.52).

Support: Visit www.ikea.com or your local IKEA store for assistance.