IKEA MÅNALG 204.838.94 Wall Lamp instructions manual

The IKEA MÅNALG 204.838.94 is a modern wall lamp designed for ambient lighting, featuring a sleek design suitable for various interior styles. It requires assembly and installation, operates with standard light bulbs (not included), and includes necessary mounting hardware. Below are key sections for safety, parts list, assembly, installation, operation, care, and troubleshooting.

1. Parts & Components 2. Safety Information 3. Assembly Instructions 4. Installation Guide 5. Specifications 6. Operation & Use 7. Care & Maintenance 8. Troubleshooting 9. Warranty & Support

Parts & Components

Key components included in the package: Wall lamp shade, Mounting bracket, Screws and wall plugs, Electrical wire set, Instruction manual.

PartDescription
Wall lamp shadeMain decorative and protective cover
Mounting bracketMetal bracket for securing to wall
Screws and wall plugsFor mounting on various wall types
Electrical wire setPre-wired connector for easy installation
Instruction manualThis document

Safety Information

Read all instructions before assembly and installation.

  1. Ensure power is turned OFF at the circuit breaker before installation.
  2. Use only recommended light bulb type and wattage (see Specifications).
  3. Do not install near heat sources or in damp locations unless rated for such use.
  4. Ensure wall can support the weight of the lamp.

WARNING! Risk of electric shock. Installation should be performed by a qualified electrician if you are unsure.

Assembly Instructions

Assemble components before mounting to wall.

  1. Attach the mounting bracket to the back of the lamp shade using provided screws.
  2. Connect the electrical wires from the lamp to the wall wiring using wire connectors (follow color coding: brown/live, blue/neutral, green-yellow/ground).
  3. Secure all connections and tuck wires neatly into the bracket.

CAUTION! Do not overtighten screws to avoid damaging components.

Installation Guide

Mount the assembled lamp to the wall.

  1. Turn off power at the circuit breaker.
  2. Mark drilling positions on wall using the mounting bracket as a template.
  3. Drill holes and insert wall plugs.
  4. Align bracket with holes and secure with screws.
  5. Attach the lamp shade to the mounted bracket.
  6. Install the light bulb (not included).
  7. Restore power and test the lamp.

Tip: Use a level to ensure the lamp is straight before final tightening.

Specifications

Operation & Use

Operate via wall switch or connected dimmer (if compatible).

Switching: Use the wall switch to turn the lamp ON/OFF.

Dimmer Compatibility: Compatible with leading-edge dimmers if using dimmable LED bulbs. Check bulb specifications.

Adjustment: The lamp shade is fixed; no adjustable parts.

Care & Maintenance

Unplug or turn off power before cleaning.

  1. Use a dry, soft cloth to dust the lamp shade.
  2. For stubborn marks, use a slightly damp cloth. Do not use abrasive cleaners.
  3. Replace light bulb when it fails (ensure power is OFF).

CAUTION! Do not immerse the lamp in water or use liquid cleaners directly on electrical parts.

Troubleshooting

SymptomPossible CauseCorrective Action
Lamp does not lightPower off / Bulb faultyCheck circuit breaker; replace bulb; ensure switch is ON.
Flickering lightLoose connection / Bulb typeCheck wire connections; ensure bulb is properly seated and compatible.
Lamp feels looseMounting screws looseTighten screws on bracket and shade. Ensure wall anchors are secure.
OverheatingBulb wattage too highUse bulb with wattage equal to or less than specified maximum.

Note: If problems persist, discontinue use and consult a qualified electrician.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms for details.

For customer support, assembly videos, or spare parts:

Recycling: Dispose of packaging and product according to local regulations. Recycle where facilities exist.

IKEA MÅNALG 204.838.94 Wall Lamp instructions manual © - All Rights Reserved 2025