IKEA MYDAL 005.318.91 Bunk Bed instructions manual

The IKEA MYDAL 005.318.91 is a sturdy, space-saving bunk bed made from solid pine, featuring a classic Scandinavian design with a clear lacquer finish. It includes two bed frames (80x200 cm each), a safety ladder, and required hardware. Designed for ages 6 and up, with a maximum load of 110 kg per bed. Below are key sections for safety, parts list, assembly, use, care, and warranty information.

1. Safety Instructions 2. Parts & Hardware List 3. Assembly Instructions 4. Specifications 5. Proper Use & Setup 6. Mattress Requirements 7. Care & Maintenance 8. Disassembly & Moving 9. Warranty Information 10. Troubleshooting

Safety Instructions

Key safety warnings: Always use guardrails on upper bunk. Ensure mattress thickness does not exceed specified limit. Use only on stable, level floor.

Warning	Description
Guardrail use	Upper bunk guardrail must always be installed and secure
Age/weight limits	For ages 6+; max 110 kg per bed
Mattress thickness	Max 16 cm for upper bunk to prevent falls
Ladder placement	Attach ladder securely; use only for climbing
Regular checks	Check all fittings every two weeks for tightness
No modifications	Do not modify bed structure or drill extra holes
No jumping	Prohibit jumping or rough play on beds
Clearance space	Ensure adequate ceiling clearance above upper bunk
No hanging items	Do not hang ropes, belts, or cords from bed
Two-person assembly	Assemble with another adult; parts are heavy

Parts & Hardware List

Unpack and verify all parts before assembly. Check against packing list.

Bed frames: Upper and lower bed frames (solid pine).
Guardrails: Two guardrails for upper bunk.
Ladder: One safety ladder with steps.
Support slats: Set of wooden slats for each bed.
Hardware bag: Contains screws, bolts, washers, Allen key.

WARNING! Do not discard packing until all parts are verified. Missing parts? Contact IKEA customer service.

Assembly Instructions

Follow step-by-step assembly guide included. Estimated assembly time: 90 minutes.

Prepare workspace: Clear area; lay out parts; have tools ready (Allen key provided).
Assemble bed ends: Connect side rails to headboard/footboard using bolts.
Install support slats: Attach slats to bed frames as shown in diagram.
Attach guardrails: Secure guardrails to upper bunk using provided screws.
Mount ladder: Attach ladder to upper bunk frame at designated points.
Final check: Ensure all connections are tight and bed is stable.

CAUTION! Tighten all bolts firmly but do not overtighten to avoid wood splitting.

Specifications

Model: MYDAL 005.318.91
Material: Solid pine, clear lacquer finish
Dimensions (assembled): Width: 97 cm, Length: 209 cm, Height: 161 cm
Bed size: Each bed 80x200 cm (standard single)
Weight capacity: 110 kg per bed
Recommended age: 6 years and older
Mattress thickness: Max 16 cm for upper bunk
Included: 2 bed frames, guardrails, ladder, slats, hardware, Allen key
Warranty: 10-year limited warranty (see terms)

Proper Use & Setup

Place bed on level, stable floor. Ensure adequate room around bed for access and ventilation.

Setup tips: Position away from windows, heaters, and ceiling fans. Leave at least 30 cm clearance from walls for making beds.

Guardrails: Must be installed on both sides of upper bunk. Check that gap between guardrail and mattress is less than 7.5 cm. Ladder: Attach securely; ensure steps are clean and dry. Regular inspection: Check all bolts and connections every two weeks, especially after initial assembly.

Mattress Requirements

Use only mattresses meeting specified dimensions and thickness.

Size: 80x200 cm (standard single mattress).
Upper bunk thickness: Maximum 16 cm to prevent falls over guardrail.
Lower bunk thickness: Up to 20 cm allowed.
Type: Use firm, supportive mattress; avoid overly soft or sagging mattresses.

Tip: Measure mattress before purchase to ensure proper fit and safety.

Care & Maintenance

Clean with damp cloth; avoid harsh chemicals. Tighten bolts regularly.

Surface cleaning: Wipe with damp cloth; dry immediately.
Stain removal: Use mild soap solution; never use abrasive cleaners.
Wood care: Avoid direct sunlight and excessive humidity to prevent warping.
Hardware check: Inspect bolts every two weeks; tighten if loose.
Slat inspection: Check slats periodically for cracks or damage.

WARNING! Do not use wax, polish, or silicone sprays on bed surfaces.

Disassembly & Moving

To disassemble, reverse assembly steps. Label parts for easier reassembly.

Warranty Information

10-year limited warranty from date of purchase. Covers material and manufacturing defects under normal household use. Warranty does not cover damage from improper assembly, accidents, modifications, or commercial use. Proof of purchase required. For warranty claims, contact IKEA customer service with product name and article number (005.318.91).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Bed wobbles or shakes	Loose bolts	Tighten all bolts with Allen key; check floor level.
Guardrail feels loose	Screws not tight	Tighten guardrail attachment screws; check wood for cracks.
Ladder unstable	Improper attachment	Reattach ladder according to instructions; ensure weight is on steps.
Squeaking noise	Wood friction or loose joints	Tighten all connections; apply candle wax to squeaky joints.
Slats sagging or breaking	Excess weight or defective slat	Replace damaged slats; ensure weight limit is not exceeded.

Missing parts: Contact IKEA customer service with article number 005.318.91.

Support: IKEA customer service: 1-888-888-4532; www.ikea.com