IKEA MUSIK 604.902.13 Wall Lamp instructions manual

The IKEA MUSIK 604.902.13 is a wall-mounted lamp designed for ambient lighting. It features a simple, modern design suitable for various rooms. Below are key sections for safety, features, installation, operation, care, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Package Contents 4. Specifications 5. Installation Instructions 6. Operation 7. Care & Maintenance 8. Troubleshooting 9. Warranty & Support

Features at a Glance

Key components: Wall bracket, Lamp shade, Mounting screws, Power cord with switch.

Feature	Description
Design	Modern, minimalist wall lamp
Mounting	Wall-mounted with included bracket
Light Source	E12 bulb socket (bulb not included)
Power	Standard 120V AC, 60Hz
Switch	Inline cord switch
Material	Metal and plastic construction

Safety Information

Read all instructions before installation and use.

Ensure power is turned OFF at circuit breaker before installation.
Use only with E12 base bulb, max 40W incandescent or equivalent LED.
Do not install near heat sources or in damp locations unless rated.
Keep out of reach of children during installation.

WARNING! Risk of electric shock. Installation should be performed by a qualified person if unsure.

Package Contents

Wall lamp shade (1)
Wall mounting bracket (1)
Mounting screws and wall plugs (2 sets)
Power cord with inline switch (1)
Instruction manual (1)

Note: Light bulb is not included.

Specifications

Model: MUSIK 604.902.13
Bulb Socket: E12 (candelabra base)
Max Wattage: 40W incandescent or 5W LED equivalent
Voltage: 120V AC, 60Hz
Cord Length: 5.9 ft (1.8 m)
Dimensions: 5.9" x 3.9" x 4.7" (15 x 10 x 12 cm)
Weight: 1.1 lbs (0.5 kg)
Color: White

Installation Instructions

Tools needed: Screwdriver, drill (for masonry walls), pencil, level.

Turn off power at circuit breaker.
Hold bracket against wall at desired location. Use level to ensure it is straight.
Mark screw holes with pencil.
Drill holes (if needed) and insert wall plugs for solid walls.
Secure bracket to wall using provided screws.
Attach lamp shade to bracket according to diagram (usually twist or snap-on).
Install appropriate E12 bulb (not included). Do not exceed max wattage.
Plug cord into outlet. Restore power.

Tip: Ensure bracket is firmly attached to wall to support lamp weight.

Operation

Use the inline switch on the power cord to turn the lamp ON/OFF.

Ensure bulb is properly installed.
Plug power cord into a standard 120V outlet.
Press the switch to the "I" position for ON, "O" for OFF.
Adjust positioning if needed by gently angling the shade (if adjustable).

Note: Lamp may become warm during use. Avoid touching bulb.

Care & Maintenance

Unplug lamp before cleaning. Use a dry, soft cloth to dust the shade and body. Do not use abrasive cleaners or liquids.

CAUTION! Never immerse the lamp in water or other liquids.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not light	Power/Bulb	Check outlet; ensure bulb is screwed in properly; replace bulb.
Flickering light	Loose bulb/faulty bulb	Tighten bulb; try a different bulb.
Lamp feels loose	Bracket not secure	Tighten mounting screws; ensure wall anchors are used if needed.
Overheating	Bulb wattage too high	Use bulb with correct wattage (max 40W incandescent or equivalent).
Switch not working	Faulty switch	Unplug lamp; contact IKEA support for replacement cord if under warranty.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to IKEA's warranty terms for details. For assistance, visit the IKEA website or contact your local IKEA store.

Support: www.ikea.com or 1-888-888-4532