IKEA MONAZIT 004.076.55 Ceiling Lights instructions manual

The IKEA MONAZIT 004.076.55 is a ceiling-mounted light fixture designed for indoor use. It features a minimalist design, energy-efficient LED light source, and is intended for installation on standard ceiling surfaces. Below are key sections for safety, product overview, installation, operation, care, and troubleshooting.

Product Overview & Contents

Key components: Ceiling plate, LED light module, Mounting bracket, Screws and wall plugs, Quick-connect wire connectors, Instruction manual.

Safety Information

Read all instructions before installation and keep for future reference.

1. ELECTRICAL SAFETY: Installation must be performed by a qualified electrician in accordance with local building and electrical codes.
2. Turn off power at the circuit breaker before beginning installation.
3. Ensure the ceiling can support the weight of the fixture.
4. Do not install in damp or wet locations unless rated for such use.
5. Do not modify the fixture or use incompatible parts.

WARNING! Risk of electric shock or fire if installed incorrectly. Ensure power is OFF.

Tools Required

You will need the following tools (not included):

• Phillips screwdriver
• Drill (if mounting to concrete)
• Wire stripper/cutter
• Pencil
• Measuring tape
• Ladder or step stool

Installation Instructions

Follow these steps carefully.

1. Prepare the area: Turn off power at the main circuit breaker. Remove any old fixture.
2. Mount the bracket: Position the mounting bracket over the electrical box. Mark screw holes. Secure the bracket using provided screws.
3. Connect wires: Connect fixture wires to house wires using wire connectors: Black (Live) to black, White (Neutral) to white, Green/Yellow (Ground) to ground.
4. Attach the fixture: Align the ceiling plate with the bracket. Secure with the provided screws or by twisting into place as per design.
5. Final check: Ensure all connections are tight and no wires are pinched. Restore power and test the light.

CAUTION! Do not overtighten screws. Ensure the fixture is stable before releasing.

Specifications

• Model: MONAZIT 004.076.55
• Light Source: Integrated LED
• Luminous Flux: [e.g., 800 lumens]
• Color Temperature: [e.g., 2700K Warm White]
• Input Voltage: 120V AC, 60Hz
• Power Consumption: [e.g., 10W]
• Dimensions: [e.g., Diameter: 12 inches, Height: 3 inches]
• Weight: [e.g., 2.2 lbs]
• Material: Steel/Plastic
• IP Rating: IP20 (For dry indoor use only)

Operation & Settings

This fixture is operated by a standard wall switch. It does not have a built-in dimmer. For dimming, use only with compatible external LED dimmer switches certified for use with low-power LED loads.

Note: The integrated LED module is not user-replaceable. If the light fails, the entire fixture may need replacement under warranty terms.

Connecting to Power

Connection must be to a properly grounded electrical outlet box.

1. Confirm power is OFF at the breaker.
2. Verify house wiring: Live (Black), Neutral (White), Ground (Green/Yellow or bare copper).
3. Use provided wire connectors. Twist wires together clockwise and secure with connector.
4. Tuck wires neatly into the electrical box.

Tip: If unsure about wiring, consult a licensed electrician.

Care & Maintenance

Turn off power and allow the fixture to cool before cleaning.

1. Use a soft, dry or slightly damp cloth to wipe the surface.
2. Do not use abrasive cleaners, chemicals, or solvents.
3. Do not spray liquids directly onto the fixture.

CAUTION! Never immerse the fixture in water or other liquids.

Regulatory & Warranty

This product complies with relevant safety standards. It carries a limited warranty from IKEA. For warranty details, visit www.ikea.com or contact your local IKEA store. Keep your receipt as proof of purchase.

Disposal: Dispose of this product according to local regulations for electronic waste. Do not dispose of with household trash.

Troubleshooting

Service: For assistance, contact IKEA Customer Support at 1-800-434-IKEA (4532) or visit www.ikea.com.