IKEA MODERMOLN 305.464.76 Work Lamp instructions manual

The IKEA MODERMOLN 305.464.76 is a versatile work lamp designed for focused lighting on desks, workbenches, or reading areas. It features an adjustable arm and head for precise light direction, an energy-efficient LED light source, an on/off switch, and a clamp or base for secure mounting. Below are key sections for safety, features, assembly, installation, operation, care, and troubleshooting.

1. Features at a Glance 2. Parts Included 3. Safety Instructions 4. Assembly & Installation 5. Operation 6. Care & Maintenance 7. Specifications 8. Troubleshooting 9. Warranty & Support

Features at a Glance

Key components: Adjustable gooseneck arm, LED light head with diffuser, On/Off switch, Clamp or weighted base, Power cord with plug.

Feature	Description
Adjustable arm	Flexible gooseneck for directing light precisely
LED light source	Energy-efficient, long-lasting, cool operation
On/Off switch	Conveniently located on the cord or base
Mounting options	Clamp for desk edge or stable weighted base
Power cord	Standard length for plug-in operation
Light head rotation	Can be tilted to avoid glare

Parts Included

1x Lamp head with integrated LED
1x Adjustable gooseneck arm
1x Clamp assembly OR weighted base
1x Mounting hardware (screws, if applicable)
1x Power cord with On/Off switch
1x Instruction manual (this sheet)

NOTE: Check all parts before assembly. Contact IKEA if any part is missing.

Safety Instructions

WARNING! To reduce the risk of fire, electric shock, or injury:

Read all instructions before use.
This lamp is for indoor use only.
Do not use with dimmer switches unless specified.
Unplug before cleaning or maintenance.
Do not immerse in water or other liquids.
Ensure the clamp or base is securely attached to a stable surface.
Do not bend the gooseneck excessively or force it beyond its natural range.
Use only with the provided power cord.
Keep away from children and pets during assembly.

Assembly & Installation

Follow these steps to assemble and install your work lamp.

Prepare the mounting point: Choose a stable desk edge or surface. Ensure it is clean and dry.
Attach the clamp/base:
- For clamp version: Loosen the clamp screw, place it over the desk edge (max thickness: 2 in / 5 cm), and tighten firmly.
- For base version: Place the weighted base on a flat, stable surface.
Connect the arm: Screw the threaded end of the gooseneck arm into the socket on the clamp or base. Hand-tighten securely.
Attach the lamp head: Align the lamp head with the top of the arm and screw it on until snug.
Route the cord: Arrange the power cord safely to avoid tripping hazards. Plug into a standard 120V AC outlet.

CAUTION! Do not overtighten connections. Ensure the lamp is stable before use.

Operation

Turning On/Off: Press the switch on the power cord or base to turn the lamp on. Press again to turn off.
Adjusting Light Direction: Gently bend the gooseneck arm to position the light where needed. Tilt the lamp head to minimize glare.
Optimal Use: Position the lamp so the light falls evenly on your work surface without shining directly into your eyes.

Tip: The LED does not get hot, making it safe for use near papers and other materials.

Care & Maintenance

Unplug the lamp before any cleaning.

Exterior: Wipe with a soft, dry cloth. For stubborn marks, use a slightly damp cloth. Do not use abrasive cleaners or chemicals.
Gooseneck Arm: Wipe clean with a dry cloth. Do not pull or twist excessively.
LED Light Source: The LED is not user-replaceable. If it fails, the entire lamp head may need replacement.

CAUTION! Never immerse any part of the lamp in water.

Specifications

Product Name: MODERMOLN
Article Number: 305.464.76
Light Source: Integrated, non-replaceable LED
Power Consumption: [e.g., 5W] (Check label on product)
Light Color: Cool White / Daylight
Cord Length: Approximately 5 ft (1.5 m)
Input Voltage: 120V AC, 60Hz
Max. Clamp Thickness: 2 in (5 cm)
Materials: Steel, plastic

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Not plugged in / Switch off / Outlet issue	Ensure plug is secure in outlet. Check switch is ON. Try a different outlet.
Lamp flickers	Loose connection / Faulty outlet	Check all connections are tight. Try a different outlet.
Lamp is unstable	Clamp not tight / Base on uneven surface	Tighten the clamp screw firmly. Place base on a flat, level surface.
Gooseneck won't hold position	Arm over-extended / Worn out	Do not bend beyond its limit. If it remains loose, it may be damaged.
Light is too dim or wrong color	LED failure	The integrated LED may be at end of life. Consider product replacement.

Warranty & Support

This IKEA product is guaranteed under the terms of the IKEA commercial warranty. Refer to the IKEA warranty leaflet included with your purchase or visit www.ikea.com for details.

For Assembly Help or Support:
Visit: www.ikea.com
Contact your local IKEA store.
Have the article number (305.464.76) and your receipt ready.

Recycling: Dispose of this product according to local electronic waste regulations. Do not dispose of with household waste.