IKEA MITTLED 204.635.70 Lighting instructions manual

The IKEA MITTLED 204.635.70 is a modern LED lighting solution designed for energy efficiency and versatile illumination. This manual provides essential information for safe installation, operation, and maintenance of your MITTLED light. Below are key sections covering safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Operation 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: LED light panel, power adapter, mounting hardware, remote control (if applicable).

Feature	Description
LED Type	High-efficiency LED array for bright, even illumination
Color Temperature	Adjustable (e.g., 3000K warm white to 6000K cool white)
Dimmable	Compatible with standard dimmer switches (if model supports)
Power Input	AC 100-240V, 50/60Hz
Mounting Options	Ceiling, wall, or suspended installation
Remote Control	For adjusting brightness and color temperature (if included)
IP Rating	IP20 for indoor use (check specific model)
Lifespan	Up to 25,000 hours
Warranty	Limited warranty as per IKEA policy

Installation

Unpack and inspect contents. Ensure all parts are present before starting.

Turn off power: Switch off electricity at the circuit breaker.
Choose location: Select a stable, dry surface away from heat sources.
Mount bracket: Use provided screws to attach mounting bracket to ceiling/wall.
Connect wires: Follow wiring diagram (live, neutral, ground).
Attach light: Secure the light panel to the bracket.
Restore power: Turn electricity back on at the circuit breaker.

WARNING! Installation should be performed by a qualified electrician. Ensure power is off during installation to avoid electric shock.

First-Time Setup

After installation, configure your light for first use.

Power on: Switch on the light using wall switch or remote.
Pair remote: If included, point remote at light and press pair button (if required).
Adjust settings: Use remote or switch to set desired brightness and color temperature.
Test operation: Ensure light turns on/off and dims smoothly.

CAUTION! Do not touch LED panel directly with bare hands; use clean cloth if necessary.

Specifications

Model: MITTLED 204.635.70
Power Consumption: 20W (equivalent to 150W incandescent)
Luminous Flux: 1800 lumens
Color Rendering Index (CRI): >80
Dimensions: 600mm x 600mm x 15mm (check specific model)
Weight: 2.5 kg
Operating Temperature: -20°C to 40°C
Certifications: CE, RoHS, Energy Star (if applicable)

Controls and Settings

Control your light via wall switch, remote, or smart home system (if compatible).

Wall Switch: Standard on/off; dimmer switch for brightness control.

Remote Control: POWER, Brightness +/-, Color Temperature, Mode (e.g., reading, relax), Timer.

Settings: Adjust brightness (0-100%), color temperature (warm to cool), timer (1-4 hours), memory function (saves last setting).

Connecting to Power

Ensure proper electrical connection for safe operation.

Use correct voltage: Check label for input voltage (100-240V AC).
Connect to junction box: Use wire nuts to connect live (brown), neutral (blue), ground (green/yellow).
Secure connections: Ensure no loose wires; use electrical tape if needed.
Test: Turn on power and verify light operation.

Tip: If using extension cord, ensure it is rated for the light's power consumption.

Operation

Daily use instructions for optimal performance.

Turn on/off: Use wall switch or remote POWER button.
Adjust brightness: Press +/- buttons on remote or use dimmer switch.
Change color temperature: Cycle through options (warm, neutral, cool).
Use timer: Set timer for automatic shut-off (1, 2, 3, 4 hours).
Memory function: Light remembers last brightness and color setting.

WARNING! Do not operate light if damaged or if you notice flickering. Disconnect power and contact support.

Maintenance

Regular care ensures long lifespan.

Cleaning: Turn off and cool down. Use dry, soft cloth to wipe surface. Do not use chemicals or abrasive materials.

CAUTION! Do not immerse light in water. Avoid contact with liquids to prevent electric shock.

Regulatory Information

Complies with EU directives for electrical safety and EMC. Disposal: Do not dispose with household waste. Recycle according to local regulations. For support, visit www.ikea.com or contact IKEA customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Light does not turn on	No power	Check circuit breaker; ensure switch is on; verify wiring.
Flickering	Loose connection or incompatible dimmer	Secure wires; use compatible dimmer switch.
Remote not working	Dead batteries or obstruction	Replace batteries; ensure clear line of sight to light.
Dim light	Brightness setting low or aging LED	Adjust brightness; if persistent, LED may need replacement.
Overheating	Poor ventilation or high ambient temperature	Ensure adequate airflow; reduce ambient temperature.

Reset: Turn off power for 30 seconds, then restart.

Service: Contact IKEA customer service or visit www.ikea.com for warranty claims.