IKEA MISTERHULT 204.376.37 Table Lamp instructions manual

The IKEA MISTERHULT 204.376.37 is a modern table lamp featuring a metal shade, adjustable arm, E26/E27 socket (max 13W LED or 60W incandescent), on/off switch on cord, and requires user assembly. Below are key sections for safety, parts list, assembly, installation, operation, care, and troubleshooting.

1. Parts Included 2. Safety Information 3. Assembly Instructions 4. Installation & Setup 5. Specifications 6. Operation 7. Care & Maintenance 8. Troubleshooting 9. Warranty & Support

Parts Included

Before assembly, verify all parts are present.

Part Description	Quantity	Image Reference
Metal lamp base	1	A
Adjustable metal arm	1	B
Metal shade	1	C
E26/E27 socket with pre-attached cord	1	D
Mounting screws	2	E
Hex key (Allen wrench)	1	F
Instruction manual	1	-

Note: Light bulb not included.

Safety Information

WARNING! To reduce risk of fire, electric shock, or injury:

Unplug lamp before assembly, cleaning, or replacing bulb.
Use only with E26/E27 base bulbs. Max 13W LED or 60W incandescent. Do not exceed wattage.
Do not use in damp/wet locations (not rated for bathrooms/outdoors).
Ensure cord is not pinched, damaged, or placed under carpets/heat sources.
This lamp is for household use only. Not for commercial purposes.
Keep away from children. Small parts are choking hazards.

Assembly Instructions

Estimated assembly time: 15-20 minutes. Tools needed: Provided hex key.

Attach base to arm: Insert arm (B) into base (A). Align holes and secure using provided screw (E) and hex key (F). Tighten firmly.
Attach socket: Thread the cord from socket (D) through the arm (B) from the top. Pull gently until socket rests at top of arm.
Attach shade: Place metal shade (C) over socket. Align shade's mounting holes with socket's threads. Rotate shade clockwise until snug (no tools required).
Final check: Ensure all connections are tight. Arm should be adjustable but hold position. Cord should move freely through arm.

CAUTION! Do not overtighten screws. Do not force parts.

Installation & Setup

Choose a stable, flat surface near a power outlet.
Install bulb: Ensure lamp is unplugged. Screw in an E26/E27 base bulb (max 13W LED or 60W incandescent) into socket.
Plug in: Plug cord into a standard 120V AC outlet.
Adjust: Gently bend the arm to direct light as desired.
Operate: Use the on/off switch on the cord to turn lamp on/off.

Tip: For optimal light distribution, point shade opening downward or to the side.

Specifications

Model: MISTERHULT 204.376.37
Type: Table Lamp
Material: Metal (shade, arm, base)
Socket: E26/E27 (standard)
Max Wattage: 13W LED or 60W incandescent
Cord Length: 6 ft (1.8 m)
Switch: On/off rocker switch on cord
Voltage: 120V AC, 60Hz
Dimensions (approx): Height: 18" (46 cm), Base Diameter: 6" (15 cm)
Weight: 3.3 lbs (1.5 kg)

Operation

On/Off: Use the switch on the power cord.

Adjustment: The arm is adjustable. Gently move it to direct light. It will hold its position.

Bulb Replacement:

Unplug lamp and allow bulb to cool.
Unscrew old bulb from socket.
Screw in new E26/E27 bulb (max 13W LED or 60W incandescent).
Plug in and test.

WARNING! Never touch a hot bulb. Do not use bulbs exceeding specified wattage.

Care & Maintenance

Cleaning: Unplug lamp. Wipe with a soft, dry cloth. Do not use abrasive cleaners, liquids, or sprays on any part.
Storage: Store in a dry place. Avoid stacking heavy items on it.
Cord Care: Do not pull cord to unplug. Grasp the plug. Keep cord away from heat and sharp edges.

CAUTION! Never immerse lamp in water or other liquids.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Not plugged in / Bulb burnt out / Switch off	Plug into outlet. Replace bulb. Ensure switch is ON.
Lamp flickers	Loose bulb / Faulty bulb	Turn off, unplug, and tighten bulb. Try a different bulb.
Lamp gets very hot	Bulb wattage too high	Unplug immediately. Replace with a bulb of correct max wattage (13W LED/60W incandescent).
Arm is loose/won't hold position	Screw not tight enough	Unplug lamp. Use hex key to tighten the screw connecting arm to base.
Unusual smell/smoke	Electrical fault / Overheating	Unplug immediately. Do not use. Contact IKEA support.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms included with purchase or at www.ikea.com.

For assistance:
IKEA US Customer Support: 1-888-888-4532
Website: www.ikea.com/us/en/customer-service
Visit your local IKEA store for parts or help.

Recycling: Dispose of according to local regulations for electronic waste. Do not dispose of with household trash.