IKEA MISSMYRA 604.806.24 LED Light instructions manual

The IKEA MISSMYRA 604.806.24 is a modern LED light fixture designed for indoor use, featuring energy-efficient LED technology, adjustable brightness settings, and a sleek Scandinavian design. It is suitable for various room types and provides warm, diffused lighting. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: LED light panel, mounting bracket, power adapter, wall plug, and optional remote control (if included).

Installation

Unpack and inspect all parts. Ensure you have the correct tools (screwdriver, drill, level).

1. Choose location: Select a suitable wall or ceiling area near a power outlet.
2. Mount bracket: Use provided screws to attach mounting bracket securely to wall/ceiling.
3. Attach light: Hang or secure the LED light panel onto the mounted bracket.
4. Connect power: Plug power adapter into light, then into wall outlet.

WARNING! Ensure power is turned off at circuit breaker before installation. Use appropriate safety gear.

First-Time Setup

After installation, power on the light and configure settings.

1. Power on: Switch ON/OFF button to "ON" or plug into outlet.
2. Test operation: Verify light turns on and functions correctly.
3. Adjust brightness: Use remote or built-in controls to set desired brightness level.
4. Position light: Adjust angle or direction if fixture allows.

CAUTION! Do not touch LED panel directly with bare hands; use cloth if adjustment is needed.

Specifications

• Model: MISSMYRA 604.806.24
• Light Source: LED, non-replaceable (integrated)
• Power Consumption: [e.g., 15W]
• Luminous Flux: [e.g., 1200 lumens]
• Color Temperature: Warm white (2700K-3000K)
• Input Voltage: 100-240V AC, 50/60Hz
• Dimensions: [e.g., 30cm x 30cm x 5cm]
• Weight: [e.g., 1.5 kg]
• Material: Plastic/acrylic diffuser, metal frame
• Protection Rating: IP20 (indoor use only)

Controls and Settings

Control via ON/OFF switch on unit or remote (if included).

Manual Controls: ON/OFF switch. Remote (if applicable): POWER, Brightness +/-, Timer, Mode.

Brightness Settings: Adjust via remote or switch cycles (Low/Medium/High). Timer: Set auto-off duration (e.g., 30 min, 60 min). Mode: Select light mode (constant/dimming).

Connecting to Power

Use included power adapter and wall plug.

1. Ensure power is off at outlet.
2. Connect power adapter cable to light input port.
3. Plug adapter into wall outlet.
4. Switch on at outlet and use ON/OFF control.

Tip: Do not use extension cords permanently; connect directly to wall outlet.

Using the Light

Operate manually or via remote.

1. Turn on: Press ON/OFF switch or remote POWER button.
2. Adjust brightness: Use brightness controls to increase/decrease light level.
3. Set timer: Press TIMER to set auto-off (if supported).
4. Turn off: Press POWER or switch to OFF.

WARNING! Do not cover light during operation; ensure proper ventilation.

Safety Features

Overheat Protection: Automatically reduces brightness or turns off if overheating. Short-Circuit Protection: Built-in fuse or circuit protection. Child Safety: No accessible hazardous parts.

Care & Cleaning

Unplug before cleaning. Wipe with dry, soft cloth. Do not use chemicals or abrasive materials.

CAUTION! Do not immerse in water; avoid liquid contact with electrical parts.

Regulatory Information

CE Marking: Complies with EU safety standards. RoHS: Free of hazardous substances. Waste Disposal: Dispose according to local electronic waste regulations. For support, visit www.ikea.com or contact IKEA customer service.

Troubleshooting

Reset: Unplug for 30 seconds, then reconnect.

Service: Contact IKEA customer service or visit www.ikea.com for assistance.